How to Render Lighting Anime in Procreate
StyleFrame Team8 min read
To render anime lighting in Procreate, paint flat base colors first, then add a Multiply shadow layer in a saturated dark blue or violet instead of black. Next, add a hard-edged highlight layer and a rim light on separate layers. Finish with eye reflections, a soft glow, and a subtle chromatic aberration pass. The look comes from a few deliberate, crisp light shapes, so keep each lighting element on its own layer and you can adjust or animate it later.
What "anime lighting" actually means
Anime rendering is not realistic shading with a different brush. It reduces light to a small number of tonal steps: a base color, one or two shadow tones, a highlight, and sometimes a rim light or glow. The edges between those steps are usually hard, and the shapes follow form rather than gradients.
Think of it as graphic design applied to light. Each shape should answer one question: where is the light coming from, and what does it hit? If a shadow or highlight doesn't answer that, remove it.
Step 1: Prepare clean flats
Lighting is only as readable as the color underneath it.
- Finish your line art on its own layer.
- Set the line art layer as the Reference layer.
- Create a new layer underneath for base colors, then use ColorDrop to fill each region quickly.
- Keep skin, hair, clothing, and accessories on separate layers where practical.
Closing gaps in line art before you fill saves time. When a fill leaks, fix the line rather than painting over the leak. Clean separation also pays off later when you mask individual lighting passes.
Step 2: Commit to a light source
Before painting any shadow, decide the direction, color, and hardness of your main light. Mark it with a small arrow on a spare layer if it helps, and delete it afterward.
- Direction: a single dominant source reads as more anime than several competing ones.
- Color: warm light (orange, yellow) suggests sunset or interiors, and cool light (blue) suggests night or overcast.
- Contrast: a harsh, high-contrast look means fewer midtones and sharper shadow edges. A soft look means lower opacity and slightly feathered edges.
Everything that follows depends on this decision. Inconsistent light direction is the quickest way to make a piece look amateur.
Step 3: Build the shadow layer
Create a new layer above your flats and clip it to the color layer below (Clipping Mask), so shadows stay inside the shape. Set the blend mode to Multiply and start around 50% opacity.
Use these rules:
- Avoid black. A dark blue or violet keeps shadows vibrant. Warm scenes can take a deep purple or red-brown.
- Use a hard-edged brush. A solid round brush or a pen with a crisp edge gives you the cel-shaded look. Use Selection or ColorDrop for large clean shapes.
- Follow form. Under the chin, beneath the bangs, along the side of the nose, and in clothing folds, shadows should wrap around volume.
- Cast shadows differ from form shadows. Cast shadows (hair on the forehead, for example) can be slightly darker than the shadow on the body itself.
Add an intermediate shade
A single shadow tone can look flat. Add a second, lighter shadow layer between the base and the deepest shadow, or deepen shadows near the core of the form. That subtle step between light and dark is what makes the render feel dimensional without losing the graphic look. Keep the intermediate shade narrow so it supports the main shadow rather than competing with it.
Step 4: Set the ambient light
Ambient light establishes the time of day and mood across the whole piece, and it's one of the quickest ways to unify your lighting.
- Create a new layer at the top of the stack.
- Fill it with a color that matches the environment, such as blue for night or orange for sunset.
- Set the blend mode to Multiply.
- Erase the areas where actual light sources hit, such as a lantern, a window, or the moon. Erase only on this layer.
If you erase too much, switch the layer back to Normal, eyedrop the fill color, and paint it back in. Adjust the layer opacity until the mood feels right. This technique also works in Photoshop, which matters if your pipeline moves between apps.
Step 5: Paint highlights and rim light
Create a highlight layer above your shadows. Options for the blend mode include Add, Color Dodge, Screen, or even Normal with carefully chosen colors. Each behaves differently:
- Normal: the most controllable. Pick colors by hand.
- Screen / Add: good for glowing, luminous highlights. Easy to overdo.
- Color Dodge: intense. Use low opacity.
Place highlights where the light hits the most direct surfaces: the top of the hair, the cheekbone, the shoulder, and the edge of folds facing the light. For rim light, paint a thin, slightly saturated edge on the side opposite the key light, using the color of the environment. Rim light separates a character from the background and is one of the strongest cues of "finished" anime lighting.
A useful trick is to fill a highlight layer with a dark color at reduced opacity, then lift highlights out with a lighter tone. A tinted highlight (light green or cyan against a blue shadow, for example) often looks better than pure white.
Step 6: Render the key materials
Different surfaces need different treatments.
- Skin: keep shadows soft in hue and sharp in shape. Warm the transition between light and shadow slightly, and keep highlights subtle.
- Hair: paint a shaped highlight band that follows the flow of the hair, then break it up with a few strands. Add a second, softer glow on the lit side.
- Eyes: these hold the most focus. Add a top shadow from the upper lid or bangs, a darker upper iris, a lighter lower iris glow, and one or two crisp catchlights. A pen with a light tone works well for reflections.
- Glasses and reflective surfaces: use diagonal streaks or shaped reflections of the environment. Keep them geometric and limit them to two or three shapes.
- Metal and leather: push contrast. Sharp, high-value highlights next to deep shadows sell the material.
Step 7: Finish with glow and lens effects
The last pass gives the image its polished, cinematic anime feel.
- Add a soft brush on a new layer with a light color for light spilling from above.
- Apply a glow effect from Adjustments and keep it restrained. Lower the layer opacity if it washes out the image.
- Merge a copy of the artwork and apply a slight chromatic aberration. Subtle values, in the single digits, usually look best.
- Duplicate the merged layer, apply a Gaussian blur, and set it to a low opacity for a soft halo.
Save the merged finishing pass for last, and keep a layered version. Non-destructive files are easier to revise.
Using Procreate's Lighting Studio for 3D models
Procreate's Lighting Studio is for 3D painting, not 2D illustration. If you're texturing an imported 3D model, you can reach it via Actions → 3D → Edit lighting & environment. There you can add up to four lights, adjust each light's Hue, Saturation, and Intensity, and choose from 11 environment presets.
It's useful for checking how a model reads under different light before you paint, but its output is not an anime-style render. Treat it as a reference tool, then paint toon-style shadows and highlights by hand on a 2D layer.
Taking Procreate lighting into motion
For motion designers, a Procreate piece often becomes a style frame, a keyframe, or an animatic asset. A few habits make that handoff smoother:
- Export layered files. Keeping shadow, highlight, rim, and ambient layers separate lets you bring them into a compositing app such as After Effects individually. That lets you animate light passes independently, such as a flickering lantern or a drifting glow.
- Name layers by function. "Key shadow," "Rim light," and "Eye catchlight" are easier to manage than "Layer 14."
- Keep lighting consistent between frames. If you're painting multiple keyframes, lock your light direction and palette.
Common mistakes to avoid
- Using pure black for shadows. It flattens color and looks muddy. Use a saturated dark tone.
- Too many light sources. Without a clear key light, shapes lose logic.
- Over-blending. Smooth gradients everywhere read as painterly rather than anime. Keep hard edges where the style calls for them.
- Overusing glow. Bloom and Add layers hide mistakes, but too much reduces contrast and detail.
- Flattening too early. Keep all lighting on separate layers until the final export.
A repeatable checklist
- Clean line art and flat colors on separate layers.
- Decide the light direction, color, and hardness.
- Multiply shadow layer with a saturated dark hue, clipped.
- Intermediate shade for depth.
- Ambient Multiply layer, erased where lights hit.
- Highlights and rim light on their own layers.
- Material-specific passes for skin, hair, eyes, and reflections.
- Subtle glow and chromatic aberration on a merged copy.
- Export layered files for animation or compositing.
Anime lighting is a system of choices more than a brush technique. With separate layers and a clear light source, you can render it quickly, revise it easily, and carry it into motion.