How to Render Hair Procreate
StyleFrame Team8 min read
To render hair in Procreate, block in a base color one tone darker than your target, then build light, shadow, reflected light, highlights, and strand detail on separate clipped layers. Work from big light-and-shadow shapes down to fine strands, and keep the hair as a few simple volumes until the very end. Most renders look flat because the artist starts with individual strands before the form reads clearly.
Before you paint: set up for control
Hair rendering goes better when your file is organized before the first brush stroke. Decide on these things first:
- Light direction. Pick one primary light source and, if you want, a weaker rim or bounce light. Everything else follows from it.
- Layer groups. Keep front hair, back hair, and any loose strands on separate layers or groups. This makes edits painless and is essential if the artwork will be animated or composited later.
- Brushes. You need surprisingly few: a soft airbrush for gradients, a hard airbrush or pen-style brush for shapes and edges, a painting brush with some pressure response, and optionally a fine brush or texture brush for flyaways and finish.
- Canvas size. Work large enough that you can zoom out and still judge the overall shape. If the piece may be scaled into video frames, build at or above your delivery resolution.
Step 1: Sketch the hair as shapes, not strands
Start with a loose sketch that captures the silhouette, the part, and the direction the hair flows. Think about how it grows from the scalp and how it frames the face. Then group the hair into a handful of large locks or "blocks." Each block is a simple volume, closer to a ribbon or cylinder than a bundle of lines.
If you find yourself drawing individual strands in the sketch, stop. At this stage you are designing flow and mass. Detail comes later and works better when it follows an established form.
Step 2: Lay down the base color
Create a layer for the base color and fill the hair shape. Choose a tone slightly darker than the final color you have in mind. Lighting will be added on top, and a darker starting point gives your highlights room to read.
Two practical tips:
- Use clipping masks. Fill the base on its own layer, then clip every later layer to it. Paint then stays inside the silhouette, and you can refine the outline in one place.
- Separate back hair from front hair. Painting the back layer slightly lighter or less saturated than the front helps create depth before any shading appears.
Some artists fill the shape with a neutral gray first, then clip a color layer above it. This keeps the silhouette independent of color decisions, which is helpful if the client changes the hair color later.
Step 3: Block in the light
Add a new layer, clip it to the base, and paint the lit areas with a lighter color. Use a hard airbrush or flat brush and think in big shapes. You can use Normal mode, or Add or Screen if you prefer a luminous build-up, but Normal is easier to control at first.
A useful mental model is to picture the head as a sphere with light hitting it, then treat each hair block as a smaller volume on that sphere. For each block, ask which side faces the light, which side turns away, and where it overlaps another block. The top of the head, the crown of a curve, and the edges closest to the light usually catch the most light.
If you are unsure where light should go, you are probably overcomplicating the structure. Simplify the hair back to blocks.
Step 4: Add shadow with hue and saturation shifts
Create another clipped layer for shadows. Instead of simply darkening the base color, pick it up and shift the hue slightly (often toward a cooler or complementary direction) and adjust the saturation. The shadow then keeps color and richness rather than turning gray or muddy.
Where to place shadows:
- Under bangs and where hair overlaps the forehead or face
- Beneath and between locks, where one block covers another
- On the side of each volume that turns away from the light
- Near the scalp and neck, where hair is denser
Use a soft airbrush for gradual form shading and a hard brush for cast shadows from overlapping locks. Mixing both gives you crisp and soft edges in the same render, which is what real hair does.
Step 5: Build atmosphere with ambient and reflected light
This step separates a competent render from one that feels dimensional. Add a layer (Screen, Add, or Normal) and paint subtle reflected light on the shadow side, using a color from the environment or the skin tone. Skin color bouncing into hair near the face is a classic way to tie the hair to the character.
You can also place a slightly more saturated color along the boundary between light and shadow. This transition zone is where color often looks richest, and emphasizing it makes the lighting pop without increasing contrast overall.
Keep these effects restrained. Atmosphere should support the form, not compete with highlights.
Step 6: Paint highlights
Highlights make hair look glossy or soft, depending on how you treat them. For glossy hair, paint a defined highlight band that follows the curve of each volume. Hair highlights tend to sit across the form, not along every strand, so shape them like bent bands that follow the head's curvature. For matte or fluffy hair, keep highlights broader, softer, and lower in contrast.
Tips for convincing highlights:
- Use a lighter, slightly warmer or cooler version of the base instead of pure white.
- Break the band into segments so it is not one perfect stripe.
- Place the brightest highlights near the light-facing crown and fade them toward the ends.
Step 7: Merge and detail with strands
Now that the volumes read clearly, it is time for strand work. Merge or duplicate your painted layers into a working layer so you can paint over the render without losing the layered version. Duplicating a group and flattening the copy keeps your non-destructive originals intact.
On the merged layer:
- Follow the flow. Use a tapered brush, vary pressure, and stroke in the direction the hair grows. Avoid rigid straight lines, since hair has gentle curves and variation.
- Paint into the edges. Small triangular or tapered shapes that sweep out from the mass soften the silhouette and make the outline feel organic.
- Add accent strands in both directions. Light strands in the shadow area and dark strands in the lit area add richness and break up large smooth zones.
- Use a texture brush sparingly. A little texture can add body, but too much creates noise that flattens the form.
- Finish with flyaways. A few loose strands extending past the silhouette go a long way. Resist adding too many.
Resist the urge to render every strand. Suggesting detail in a few focal areas, such as near the face and along the main highlights, and leaving the rest simpler reads as more realistic than uniform detail.
Step 8: Adjust color and finish
Zoom out and judge the whole image. Color adjustment tools are useful here:
- Curves or Color Balance to push the overall color mood
- Hue, Saturation, Brightness to correct areas that feel too intense or dull
- Gaussian Blur at a low amount on a duplicated layer set to Screen or Overlay to add a gentle glow
- A top layer in Overlay or Soft Light to unify color temperature
Check the hair against the rest of the illustration. If the skin and clothing have a warm key light, the hair should share it. Also view your render in grayscale to confirm values hold up: light, mid, and shadow should separate clearly.
Common mistakes when rendering hair
- Obsessing over strands too early. Detail without form makes hair look flat.
- Using pure black and pure white. Hue-shifted darks and tinted lights look richer.
- Uniform highlights. Repeating the same highlight on every lock looks artificial.
- Ignoring the silhouette. Edges that are too clean or too hairy both break believability.
- Merging too soon. Keep your layered file so you can adjust lighting later.
Taking Procreate hair into a motion pipeline
Many motion designers and animators use Procreate for character art, style frames, and texture elements, then move into After Effects, Nuke, or another compositor. A few habits make that handoff smoother:
- Export layered files and keep hair separate. Back hair, front hair, strands, and highlights as separate layers give you options in After Effects for parallax, secondary motion, or puppet-style rigs.
- Keep an unmerged version. Your merged detail layer is useful for finals, but the separated lighting layers make revisions faster.
- Plan for edge quality. Hair edges are the hardest part of any cutout. Clean, deliberate edges at high resolution make compositing easier.
Quick workflow summary
- Sketch hair as blocks and flow.
- Fill the base one tone darker than intended.
- Clip a layer and block in the light.
- Clip a layer and add hue-shifted shadows.
- Add reflected light and a saturated light-to-shadow transition.
- Paint segmented, form-following highlights.
- Merge a copy and add strands, accents, and flyaways.
- Unify color with adjustments and check values.
Hair rendering rewards patience with structure more than precision with strokes. Get the volumes, light, and color relationships right, and a handful of well-placed strands will finish the job. From there, keep your layers organized, and the same artwork can move comfortably into an animation or compositing pipeline.