How to Remove White Background Procreate
StyleFrame Team8 min read
In Procreate, remove a white background by opening Selections, choosing Automatic, tapping the white area, and dragging to set the threshold. Then tap Cut (or use the three-finger swipe menu), hide the paper color layer, and export as PNG to keep transparency. Procreate has no dedicated one-tap background remover, so clean-up on soft edges and textured art takes a few extra steps. If your goal is a compositing-ready asset, the main decision is whether to cut the white out in Procreate or let your compositor drop it with a blend mode or matte.
Why white backgrounds are awkward in Procreate
A JPEG has no alpha channel. The white you see is real pixel data, not empty space, so you can't "turn off" the background. You have to select those pixels and delete them, or tell your compositor to ignore them.
Procreate's own help documentation points out that the app lacks a single tool for this job. It offers several selection-based approaches instead. That is why forum threads on the topic are full of confused beginners: the obvious-sounding command (Clear) can fail if the selection or layer isn't set up correctly.
Before you start, check two things:
- The artwork is on its own layer. If your imported photo sits on the same layer as a filled background, deleting white will take everything with it.
- The paper color layer is hidden. The default background color layer is a solid fill, not transparency. If it stays visible, you'll never see the checkerboard that signals alpha.
Method 1: Automatic Selection (fastest for flat or clean art)
This is the approach Procreate staff recommend, and it works well on logos, flat illustrations, and scans with a clean white ground.
- Import your image (Actions → Add → Insert a photo or Add a file) and position it on the canvas.
- Make sure the image layer is the active layer.
- Tap the Selection tool (the S icon) and choose Automatic at the bottom. Set the mode to Add if you plan to tap more than one region.
- Tap the white background and keep your finger or Pencil held down. Drag left or right to change the threshold. A lower threshold selects only pure white. A higher one pulls in near-white pixels and soft edges.
- Lift your finger, then tap Cut from the selection toolbar, or open the three-finger swipe menu and choose Cut. Some users report that Clear deletes the whole layer when the selection isn't registering as expected. Cut is the more reliable option.
- Hide the background color layer to confirm transparency.
You don't need a perfect result on the first pass. Take out most of the white, then use the Eraser with a hard brush to remove leftover specks and stray marks, such as a thumb in the scan corner.
Handling enclosed white areas
Automatic Selection picks contiguous pixels. White regions enclosed by your artwork, such as the inside of a letter "O" or the gap between a handle and a mug, won't be selected from a single tap. Switch to Add mode and tap each enclosed region separately.
Method 2: Freehand selection and invert (best for photos and complex shapes)
If the subject has color similar to the background, thresholding will eat into the artwork. Select what you want to keep instead.
- Open Selections and choose Freehand (or Ellipse or Rectangle for simple shapes).
- Trace around the part you want to keep.
- Tap Invert so the background becomes the active selection.
- Scrub three fingers left and right across the canvas to delete the selected area, or use Cut.
Use Feather from the Selection options if you want a softer edge. For a sticker or a cut-out you plan to place over footage, a small amount of feathering usually looks better than a hard, aliased boundary.
Method 3: Multiply blend mode (for line art on white)
If your artwork is black or dark linework on white, such as inked drawings, comic pages, or scanned sketches, you may not need to delete anything. Set the layer's blend mode to Multiply. White multiplies to no change over whatever is beneath it, so only the darker pixels show.
This is non-destructive and keeps the semi-transparent grays of anti-aliased lines intact. The downside is that the layer isn't truly transparent. If you export it and the receiving software doesn't respect the blend mode, the white comes back. For delivery to other apps, either flatten the result to a PNG after the blend, or handle the multiply in your compositor (more on that below).
Method 4: The mask-from-copy trick
A well-known community workaround converts luminance into transparency, which is useful for drawings with smudges and soft tones:
- Select the layer, open Actions (the wrench) and tap Copy.
- Return to the layer options and add a Mask.
- Select the mask, and paste the copied image into it.
- Invert the mask so white areas become transparent.
Results vary. It works best on high-contrast black-and-white artwork. Colored or soft-tone art can come out washed out because the mask treats brightness as opacity, and colored pixels get partially transparent too. If you see gray halos, try switching the layer to Multiply as a final adjustment.
Exporting with transparency
Once the background is gone:
- Hide the paper color layer.
- Go to Actions → Share and choose PNG (not JPEG, which will flatten transparency to a solid color).
- Confirm the checkerboard shows through in the preview.
If you need a layered handoff, export a PSD instead. Keep in mind that how layers and blend modes translate depends on the app that opens the file.
Common problems and fixes
- White fringe around edges. Anti-aliased edge pixels were blended with white. Lower the threshold before cutting, shrink the selection by a pixel or two, or erase the fringe manually.
- Jagged edges. Automatic Selection can produce hard edges. Feather the selection slightly, or switch to the mask approach for more graduated transparency.
- Watercolor and textured art. Paper grain and pigment bleed make it hard to find a clean threshold. Cut conservatively and accept some residual texture, or use a mask so you can refine the result without permanently deleting pixels.
- Parts of the subject disappear. Highlights and whites inside the artwork are being selected along with the background. Switch to Freehand and Invert so you define the subject deliberately.
- Nothing happens when you cut. Check that the right layer is active and that a selection is actually present.
Taking Procreate assets into After Effects and other tools
For motion and VFX work, it often makes sense to deliver the asset in the way your compositor handles best.
After Effects. Import the PNG and check how the footage is interpreted. If you see a light halo, right-click the layer in the Project panel, open Interpret Footage, and try Straight versus Premultiplied. Premultiplied files from some apps carry the matte color in their edge pixels. The Remove Color Matting effect can also help. For line art delivered on white, leave the original and apply the Multiply blending mode on the layer instead of cutting it out. That preserves the subtle gray falloff on lines.
Premiere Pro. Use a PNG with alpha for graphics. For white-background artwork you don't want to cut, use Multiply as the blend mode in Opacity settings, or apply Ultra Key as a quick fix on simple graphics, with the caveat that keyers are less precise than an authored alpha.
Nuke. Check your premult state. If edges look dark or light, insert an Unpremult before color corrections and a Premult afterward. For white-ground linework, you can invert luminance into an alpha with a Shuffle and Invert, and then Merge with a multiply operation.
Blender and Cinema 4D. Image textures with alpha need the correct alpha mode (Straight or Premultiplied in Blender's image texture settings) to avoid fringes. For a decal on a plane, a Multiply-style blend in your shader setup serves the same purpose as the blend mode in a 2D app.
When Procreate is the wrong place to cut out the background
Procreate is excellent for stills, stickers, and illustration clean-up. It is less suited to a moving subject or a long sequence, where every frame would need the same selection work. If you're cutting out characters or objects across many frames, an automated or semi-automated approach to isolating subjects saves time.
Styleframe is an AI video and motion tool built for artistic control, and it includes a Remove Background function. Use Procreate for the hand-drawn asset, and consider Styleframe when the cut-out needs to carry through a sequence.
A quick workflow summary
- Put the artwork on its own layer and hide the paper color layer.
- For clean art, use Automatic Selection, set the threshold, and Cut.
- For photos or complex shapes, use Freehand, Invert, and Cut.
- For line art, consider Multiply instead of deleting.
- Erase leftover specks with a hard-edged Eraser.
- Export as PNG, and confirm transparency in the preview.
- In After Effects, Nuke, or your 3D tool, check the alpha interpretation to avoid fringes.
Choose the method based on what the asset has to do next. If it's a sticker or a still graphic, cut it cleanly in Procreate. If it's going into a composite, keep as much edge information as you can and let your compositing app do the final matte handling.