How to Remove Watermark in Procreate
StyleFrame Team8 min read
Procreate has no one-click watermark remover, so how you remove one depends on whether it still sits on its own layer. If it does, hide or delete the layer. If the image is flattened, you have to rebuild the covered pixels by hand with the Clone tool, Smudge, color-picked painting, or a copy-and-paste patch. Only do this on work you made or have a license to edit, since removing someone else's watermark from their artwork is a copyright problem, not a technical one.
Decide What Kind of Watermark You're Dealing With
The right fix depends on how the watermark got into the file. Check these cases before you start retouching:
- Your own watermark on a separate layer. This is the easiest case. Open the Layers panel and hide or delete the layer.
- Your own watermark on a flattened export. If you still have the original
.procreatefile, go back to it and re-export without the watermark. - A watermark baked into a PNG or JPEG you own or are licensed to edit. You need to reconstruct the pixels underneath, which is the main subject of this guide.
- A watermark on someone else's work or a stock preview. Do not retouch it out. Buy the license or ask the creator for a clean file.
Procreate does not stamp watermarks on exports itself. If you see one, it came from the source image, a third-party app, or a watermark brush you made.
Method 1: Delete or Hide the Watermark Layer
Many artists build a watermark as a stamp brush, as in the common tutorials that import a PNG as a brush shape. If you stamped it on a dedicated layer, removal takes seconds.
- Open the Layers panel.
- Find the layer holding the watermark. Tap its checkbox to hide it, or swipe left and choose Delete.
- Export again through Share, choosing PNG for lossless output or PSD if you want layers preserved for After Effects.
If you stamped the watermark directly onto the artwork layer, you may be able to undo it, but don't count on undo for old files.
Going forward, put every watermark on its own layer, named something obvious. Then you can export a branded version for social media and a clean version for clients or compositing without any retouching.
Method 2: Clone Over the Watermark
For a flattened image, the Clone tool is usually the cleanest option in Procreate. It samples one part of the image and paints it somewhere else.
- Duplicate the image layer first. Work on the duplicate so the original stays untouched.
- Open Adjustments (the magic wand icon) and choose Clone.
- Pick a soft round brush. Set the size just larger than the thinnest part of the watermark.
- Move the sampling point, the small anchor in the canvas, to a clean area with similar texture, lighting, and color.
- Paint over the watermark in short strokes. Resample often so you don't create a visible repeating pattern.
This works best on areas with organic, irregular texture, such as foliage, fabric, paper grain, or painted backgrounds. It fails on regular patterns, like brick, text, or architectural lines, because repeated sampling creates visible duplicates. For those, work along the pattern's direction and use short, deliberate samples.
Method 3: Color-Pick, Paint, and Smudge
On flat or softly graded backgrounds, painting is faster and cleaner than cloning.
- Create a new layer above the image.
- Use the color picker (press and hold on the canvas, or use the eyedropper) to sample the color right next to the watermark.
- Paint over the watermark with a hard or medium-soft brush at full opacity.
- Resample constantly. Gradients shift gradually, so you need a new color pick every few strokes.
- Switch to the Smudge tool with a low opacity (roughly half or less) and blend the painted edges into the surrounding area.
Keep the Smudge tool on the same layer as the paint, or on a merged copy, because Smudge only affects the layer you're on. Smudging at high opacity drags color in streaks and leaves obvious artifacts, so use light passes and build up.
For gradients, a better approach is to paint a patch, apply a small Gaussian Blur to just that layer, and then use a layer mask to feather it into the image.
Method 4: Patch with Copy and Paste
When the background has detail you can't paint convincingly, borrow it from elsewhere in the image.
- Use the Selection tool in Freehand mode to select a clean area with similar texture.
- Swipe down with three fingers and choose Copy & Paste to create a new layer with that patch.
- Drag the patch over the watermark. Use the transform handles to rotate or flip it so the pattern doesn't repeat obviously.
- Add a layer mask to the patch layer and use a soft brush to erase its edges into the surrounding image.
- Merge down only when you're satisfied.
Feathering the selection before you copy, using the Feather option in the Selection toolbar, gives you softer edges to start with. If the patch looks too clean compared to its surroundings, add a touch of Noise from the Adjustments menu to the patch layer to match the grain of the original image.
Handling Semi-Transparent and Tiled Watermarks
Semi-transparent logos and repeating diagonal watermarks are harder, because they affect large areas of the image rather than one corner.
- Semi-transparent logos lighten or tint the pixels underneath rather than replacing them. You can sometimes recover the look by painting a patch layer set to a blend mode, such as Multiply or Color, at reduced opacity. Expect imperfect results, and zoom in to check edges.
- Tiled watermarks across the whole image are rarely worth retouching manually. The time cost is high and the result usually degrades the image. Request the original file instead.
Procreate does not do content-aware fills. Every method here is you manually reconstructing missing information, which means the result is a plausible guess, not recovered data. For client or print work where accuracy matters, get the original.
Tips for Clean Results
- Zoom in to at least 200 percent and work in small areas. Review at 100 percent and at the final display size.
- Work on duplicate layers so every change is reversible. Don't flatten until you're finished.
- Match grain and sharpness. A perfectly smooth patch on a textured image looks like a smudge. Add Noise, or use a textured brush, to blend it in.
- Watch edges and lines. If the watermark crosses a hard edge, rebuild that edge first with a selection or a straight stroke (hold at the end of a line to snap), then fill in around it.
- Export at full resolution. Check the canvas size before and after so you're not accidentally downscaling.
- Keep a copy of the original before any retouching, so you can always prove where the work came from.
When Retouching Isn't the Right Answer
Removing a watermark is sometimes the wrong tool for the job. A few common situations:
- Stock and reference previews. These are watermarked on purpose. If you need the asset for a project, license it. Retouched previews are low resolution and a legal risk.
- Client files with your own proof watermark. Just send the final export from the layered file once the invoice is paid.
- Other artists' work. Using it, even for personal projects, without permission isn't covered by "personal use." If you like the style, use it as inspiration or a style reference, not as source material.
Where Procreate Work Fits in a Motion Pipeline
Many motion designers and animators sketch boards, character designs, and style frames in Procreate before taking them into After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke. A clean handoff matters more than clever retouching:
- Export layered PSDs or PNGs from the original
.procreatefile so there is no baked-in watermark to remove later. - Keep the watermark on its own layer, and export a watermarked version only for public sharing.
- Name layers and keep canvas sizes consistent so artwork imports into compositing without rework.
Once the artwork is clean, Styleframe can help extend it into motion. It is an AI video and motion tool built for artistic control rather than one-click generation.
To be clear, Styleframe is not a watermark remover, and it should not be used to launder watermarked work you don't have rights to. Its role begins once you have clean, licensed source art.
Quick Answers
Can Procreate remove a watermark automatically? No. It has no automatic or AI watermark removal. You use Clone, Smudge, painting, and patching manually.
Will removing a watermark reduce quality? It can. Any pixels you rebuild are approximations, and heavy smudging softens detail. Working on duplicate layers at full resolution limits the damage.
Is it legal to remove a watermark? Removing your own watermark from your own work is fine. Removing someone else's usually violates their copyright or license terms, even for personal use.
What if I flattened my own artwork with the watermark on it?
Check the original .procreate file or earlier exports first. If none exist, use Clone and patching, and keep the watermark on a separate layer next time.
The Takeaway
Start with the simplest fix: a hidden layer, or the original file. Only reconstruct pixels when you have to, and only on work you have the right to edit. For clean results, clone or patch on duplicate layers, match grain, and feather edges. Then keep your watermarks on separate layers so you never need to do this again.