How to Remove Png Background in Procreate
StyleFrame Team8 min read
Procreate has no one-tap background remover. You remove a PNG background by selecting either the background (Automatic Selection) or the subject (Freehand Selection), then cutting the background away or hiding it with a layer mask. Hide the canvas background color layer so the checkerboard shows through, then export through Actions → Share → PNG to keep the transparency. Automatic Selection works for flat or white backgrounds, and Freehand or a mask works better for anything detailed.
Before you start: set up the canvas for a clean cutout
A few habits save you from rework, especially if the PNG is headed into After Effects or another compositor.
- Duplicate the layer first. Swipe left on the image layer and tap Duplicate. Hide the original so you always have an untouched source.
- Hide the Background Color layer. At the bottom of the Layers panel, uncheck Background Color. Without this, a transparent cutout still looks like it sits on white, and it will export with a solid fill in some formats.
- Check your canvas size. Procreate resamples when you resize, and the help center notes it uses bicubic interpolation. If you plan to scale the asset up in a comp, build the canvas large from the start rather than enlarging it later.
- Select the right layer. Selections act on the active layer. Most "it deleted my whole picture" problems come from having the wrong layer active or from a selection that wasn't what you expected.
Method 1: Automatic Selection (flat or white backgrounds)
This is the fastest route when the background is a uniform color, such as a white scan or a sketch on paper.
- Tap the Selection tool (the S icon in the top toolbar).
- In the bottom bar, choose Automatic, and make sure Add is active.
- Tap the background area you want removed.
- Without lifting your finger or Pencil, drag left or right to adjust the threshold. Lower values grab fewer similar pixels, and higher values grab more.
- Tap the selection tool again to confirm, then choose Cut from the wrench menu. Alternatively, open Layer Options and choose Clear, or use the three-finger scrub gesture to delete.
If you'd rather select the subject, tap Invert after selecting the background, then choose Copy & Paste. Procreate puts the cutout on a new layer, and you can hide or delete the original.
Where it struggles: gradients, soft shadows, watercolor textures, and anything where the subject color is close to the background. Automatic Selection thresholds on color similarity, so it can eat into the subject or leave speckles. For these cases, use the next method.
Method 2: Freehand Selection (complex or photographic subjects)
When the subject has a defined silhouette but the background isn't uniform, trace it yourself.
- Tap Selection, then choose Freehand with Add active.
- Zoom in and trace around the part of the image you want to keep. Work in short, deliberate segments.
- Tap two fingers on the canvas to undo the last trace segment if you stray.
- Close the loop by tapping the start point, so you can see what's included in the selection.
- Tap Invert so the background is selected, then cut or clear it. Or leave the subject selected and use Copy & Paste to isolate it on its own layer.
A couple of practical tips:
- Zoom in far enough that your trace is accurate to a few pixels. Precision at the trace stage matters.
- Use the Feather option in the selection toolbar to soften the edge slightly. A small amount of feathering helps the cutout blend into a new background and reduces the cut-paper look.
- If your selection comes out inverted (the subject turns solid and the background clear), tap Invert once. Tracing slightly outside the canvas edge when you close the loop helps ensure edge pixels are included.
Method 3: Layer mask (non-destructive removal)
If you might need to adjust the cutout later, use a mask rather than deleting pixels.
- Make a selection of the subject using Freehand or Automatic (with Invert if needed).
- Open the Layers panel, tap the image layer, and choose Mask. Procreate applies a mask based on your active selection.
- Paint on the mask with black to hide pixels and white to reveal them. Use a hard brush for crisp edges and a soft brush for hair or transitional areas.
- When you're happy, either export as-is or merge the mask into the layer by pinching the layer and mask together.
The advantage here is reversibility. If you trimmed too much, paint it back in. That's much safer than cutting and hoping you can undo far enough.
Cleaning up edges and stray pixels
Even a good selection leaves artifacts. Before exporting:
- Erase leftovers. Use the Eraser with a hard round brush to remove specks and fragments, especially around Automatic Selection edges.
- Check on contrast. Add a temporary dark layer and then a bright one beneath your cutout. Leftover white or dark fringing is easy to spot on the opposite color.
- Remove fringe pixels. Lightly shrinking the selection before cutting, or erasing a pixel or two inward along the edge, helps when the original background was white and shows as a halo against dark backdrops.
- Zoom to 100% or higher. Check the edges at the resolution you'll actually use, not at fit-to-screen.
Exporting a transparent PNG from Procreate
- Confirm the Background Color layer is hidden.
- Tap the Actions (wrench) icon.
- Choose Share.
- Select PNG under Share Image.
- Save to Files, AirDrop, or your preferred destination.
PNG preserves transparency. JPEG does not, so exporting as JPEG will flatten your cutout onto a solid color. If you want to keep layers for later edits, save a layered copy of your artwork as well.
Using the PNG in After Effects and other tools
Transparent PNGs from Procreate generally import into compositing and 3D tools, but a few things are worth checking:
- Edge halos. If you see a light or dark outline in your comp, check how your compositor interprets the file's alpha, and test straight versus premultiplied. Mismatched alpha interpretation is a common cause of fringing.
- Resolution. Procreate canvases are set in pixels, so a small canvas will soften when scaled up. If the asset needs to move or zoom in a comp, export at the largest size you can reasonably work.
- Edge tightening. If a small fringe remains, an edge-shrink or choker tool in your compositor can tighten the matte without going back to the iPad.
- Color management. Procreate uses its own color profile, so check that your project's color settings don't shift the colors on import.
Common problems and fixes
The whole image disappeared. You likely cut with the wrong layer active, or the selection covered the entire layer. Undo with a two-finger tap and recheck the selection and active layer.
Automatic Selection leaves islands or speckles. Raise the threshold slightly, add more taps in Add mode on the leftover areas, or clean them up manually with the Eraser.
The edge looks jagged. A Freehand trace can leave stair-stepped edges. Apply a small feather before cutting, or switch to a mask and refine the edge with a soft brush.
Watercolor or textured paper won't select cleanly. Textured backgrounds have no single color to threshold on. Trace the subject with Freehand, or mask it and paint away the remaining texture by hand.
Transparent areas look white after export. Either the Background Color layer is still visible, or you exported as JPEG. Hide the layer and export as PNG.
When Procreate isn't the right tool for the cutout
Procreate's selection tools are built for illustration, not for matting photographs or video frames. Fine hair, motion blur, translucent edges, and moving subjects are hard to handle with lasso and threshold selections. For footage, the usual routes are rotoscoping or a dedicated keyer in your compositor.
If your source is generated or stylized imagery that you want to carry into motion, can be useful alongside this workflow. For a single illustration or sticker, though, Procreate's built-in tools are usually all you need.
Quick workflow summary
- Duplicate your layer and hide the Background Color layer.
- Use Automatic Selection for flat backgrounds or Freehand for complex subjects.
- Invert as needed, then Cut, Clear, or Copy & Paste to a new layer. Use a Mask if you want to stay non-destructive.
- Clean up edges with the Eraser or a soft mask brush.
- Export via Actions → Share → PNG.
- In your compositor, verify alpha interpretation and tighten the edge if needed.
FAQ
Does Procreate have a built-in background remover? Procreate's help documentation says it has no dedicated single tool for removing backgrounds. You use selection tools, masks, and the eraser.
What's the fastest way to remove a white background? Select the white area with Automatic Selection, adjust the threshold by dragging, then cut it. Clean up leftover specks with the Eraser.
How do I keep the transparency when saving? Hide the Background Color layer and export as PNG through Actions → Share. JPEG will not preserve transparency.
Can I undo a mask cut later? Yes. A layer mask keeps the original pixels, so painting white on the mask restores anything you hid.