How to Remove Photo Background in Procreate
StyleFrame Team8 min read
Procreate has no single "remove background" button, so you build the cutout with selections. Use Automatic Selection to pick a solid background (or Freehand to trace the subject), then cut it, or save the selection as a layer mask so the edit stays reversible. Hide the original background layer to confirm transparency, then export as PNG or PSD to keep the alpha channel.
This guide covers each method, how to clean up edges, and what to check before the cutout goes into After Effects, Nuke, or another compositing tool.
Before you start
A few setup habits prevent most of the frustration people run into:
- Duplicate your photo layer first. Work on the copy and hide the original. If a selection goes wrong, you still have clean source pixels.
- Hide the Background Color layer in the Layers panel. Procreate's default white canvas layer will look like a white background even after you've deleted the pixels you meant to.
- Match your canvas to your end use. If the cutout is going into a 4K comp, build the canvas at a resolution that holds up there. Resampling later softens edges. In Procreate, Actions → Canvas → Crop & Resize lets you change dimensions, and the Resample toggle scales the artwork using bicubic interpolation.
- Make sure the right layer is active. Selections only act on the layer you've highlighted. This is the usual reason a cut appears to do nothing or deletes the wrong thing.
Method 1: Automatic Selection for solid or simple backgrounds
This is the fastest route when the background is a flat color, such as a white studio sweep, a scanned sketch, or a product shot on a clean backdrop.
- Import the photo via Actions (wrench) → Add → Insert a Photo, then position it on the canvas.
- Tap the Selection tool (the S icon) and choose Automatic in the bottom toolbar. Make sure Add is active.
- Tap the background. While your finger or pencil is still down, drag left or right to change the threshold. The selected area shows as an inverted tint. Raise it until the background is covered without leaking into the subject.
- Remove the selected area using one of these:
- Tap Cut from the pop-up menu, or
- Scrub three fingers left and right across the canvas to clear the selection, or
- Choose Clear from the Layer options.
- Hide the layers underneath and look for the gray checkerboard, which tells you the pixels are truly transparent.
An alternative order of operations: select the background, tap Invert so the subject is selected, then tap Copy & Paste. That puts the isolated subject on its own new layer, and you can hide or delete the original.
When it struggles: textured backgrounds, watercolor paper, soft shadows, and subjects whose colors are close to the background. You rarely get a perfect result in one pass. Expect to leave a few specks and clean them up by hand (see below).
Method 2: Freehand selection for complex backgrounds
When the background has gradients, clutter, or colors that overlap the subject, trace the part you want to keep.
- Open the Selection tool, choose Freehand, and keep Add on.
- Zoom in and start at a recognizable point on the subject's edge. Trace carefully all the way around.
- Close the loop by tapping the starting dot, or simply bring the end point back to the start. Tapping the dot closes the selection, and the animated outline you were drawing will vanish once it's complete. That is normal behavior, not a lost selection. The selection is now active.
- Tap Invert so the background is selected instead of the subject.
- Cut or clear the selection with the three-finger gestures or the pop-up menu.
Practical tips for tracing:
- Undo a bad point with a two-finger tap rather than starting over.
- Go slightly outside the canvas edge when you reach the border so no sliver of background remains.
- Use the Remove mode to subtract areas from an existing selection, for example the gap between an arm and a torso.
- Rectangle and Ellipse selections combine with Freehand, which helps for geometric products or objects with straight edges.
Method 3: Layer mask for a non-destructive cutout
Cutting deletes pixels permanently. A mask hides them instead, so you can bring back anything you removed too aggressively. This is the better habit for client work and revisions.
- Make a selection of the subject (Automatic or Freehand).
- Open the Layers panel, tap the thumbnail of the photo layer, and choose Mask from the menu.
- The area outside your selection is hidden. Paint on the mask with black to hide more and white to reveal pixels again.
- When you're happy with the result, you can merge the mask into the layer to commit the cut. Pinching the mask and the layer together does this.
Because the mask is a separate layer, you can refine edges with a soft brush at low opacity and avoid redoing the selection from scratch.
Cleaning up edges and leftover specks
No selection method gives a production-clean edge on the first attempt. Plan a cleanup pass:
- Zoom in and sweep around the subject with the Eraser, using a hard-edged brush for crisp results.
- Look at the cutout over a dark background and a light one. Fringing and halos that are invisible on white will show up immediately. Add a temporary solid color layer beneath your cutout and flip it between black, white, and a saturated color.
- Erase stray marks such as fingers in the corner of a scan, dust, or paper texture that the threshold missed.
- Avoid over-eroding. A small bite out of an edge looks fine on a phone but can read as a hard, cut-out line at full resolution in a video frame.
Exporting with transparency
Open Actions → Share and pick the format that fits the next step:
- PNG keeps transparency and is the simplest choice for stickers, assets, and single images.
- PSD keeps your layers, which is useful if you'll refine the cutout in Photoshop or bring layers into a compositing tool.
- TIFF is available when you want a high-quality still, though check that your downstream app reads its alpha correctly.
- JPEG does not support transparency. If you export one, the transparent areas become a solid fill.
If the file will be printed on colored stock, remember that transparency only helps in software that respects it. A flattened PDF can reintroduce a white box behind your subject.
Troubleshooting common problems
- "Cut deleted my whole image." No selection was active, or the selection covered everything. Re-select, check the tinted area, and try again.
- "The background still looks white." The Background Color layer or the original photo layer is still visible. Hide them.
- "My outline disappeared." Tapping the start dot closes the selection. Open the selection menu or invert it to confirm it's active.
- "Automatic Selection grabs part of my subject." Lower the threshold, or switch to Freehand. You can also subtract mistakes with Remove mode.
- "Edges look jagged after importing into video software." Export at a larger canvas size, avoid heavy resampling, and check how your compositing app interprets alpha. A small matte choke or edge-feather adjustment in your compositor can help with dark or light fringes.
When Procreate isn't the right tool
Procreate works well for illustrations, stickers, and quick stills. For a motion pipeline, it has real limits:
- It works on single frames. Cutting out a moving subject across a clip means repeating the process frame by frame.
- Selection tools are binary and manual. Hair, motion blur, translucent fabric, and smoke need matte-quality edges that Automatic Selection can't deliver.
- Consistency between frames is a manual job, so edges can shimmer when you play a sequence back.
For hero stills, a clean Procreate cutout is often enough. For anything that needs to hold up across many frames, you'll want a dedicated approach in your compositor, such as its roto tools.
Where Styleframe fits
Styleframe is an AI video and motion tool built for artists who want control rather than a one-click black box. It sits upstream or alongside your compositing work rather than replacing it. If you've been painstakingly tracing subjects in Procreate to prep assets for a motion piece, you may want to try running the same sources through Styleframe, then keep working in the rest of your toolset.
A cutout from Procreate can serve as a reference image, or a subject isolated in Styleframe can feed a stylized sequence. Results will vary with source material, so check edges the same way you would with any matte.
Quick reference
FAQ
Does Procreate have an automatic background remover? Not as a dedicated tool. Background removal is done with Automatic Selection, Freehand selection, and masks.
Why is my exported image white behind the subject? You probably exported a JPEG or left a visible background layer. Hide it and export as PNG or PSD.
Can I undo a mask? Yes, while it's still a separate layer. Paint white on the mask to restore hidden areas.
Is Procreate good enough for video assets? For simple, clean-edged stills, yes. For moving subjects or fine detail like hair, use roto tools or a tool built for sequences.