How to Remove Object from Photo in Procreate
StyleFrame Team8 min read
Procreate has no one-tap object remover, so you remove an object by hand. Duplicate the photo layer, then cover the object with clean pixels using the Clone tool or a feathered copy-and-paste patch from a nearby area. Blend the seams with a soft eraser or Smudge on a separate layer. To strip out a whole background instead, use Selection, invert it, and cut with a three-finger swipe down.
What Procreate Can and Can't Do for Object Removal
Procreate is a painting app, not a retouching suite. It has no content-aware fill, so you decide which pixels replace the object. That makes it slower than one-click removers, but it gives you full control over the result. For stills, concept frames, matte paintings, and style frames, that control is often what you want.
Procreate suits:
- Small to medium objects on simple or repetitive backgrounds (sky, wall, grass, water, gradients)
- Cleaning up reference photos before they go into a composite
- Painting out distractions on a style frame or storyboard panel
- Isolating a subject as a transparent PNG
It struggles with large objects against complex, detailed backgrounds. Painting in a full architectural pattern or a crowd by hand is a job for other tools (more on that below).
Prep: Set Up a Non-Destructive Workflow
Before you touch the object:
- Import the photo (Actions > Add > Insert a photo) and zoom to 100% or higher so you can see the pixel structure.
- Duplicate the photo layer and hide the original. If a pass goes wrong, you can go back without re-importing.
- Add an empty layer above for patches and repairs. Keeping fixes on their own layer lets you erase, mask, or lower opacity later.
- Identify clean source areas. Look for regions near the object that share its lighting, color, and texture. Good sources make the repair invisible.
Method 1: Remove an Object with the Clone Tool
The Clone tool is the closest thing Procreate has to a stamp tool. It samples pixels from one area and paints them onto another.
- Open Adjustments and choose Clone (available in current Procreate versions; if you don't see it, update the app).
- Place the sample point on a clean area that matches the surroundings.
- Choose a soft brush with moderate opacity.
- Paint over the object in short strokes, not one long drag. Resample often so the same texture doesn't repeat in a visible pattern.
- Work from the edges of the object inward, so you always blend toward clean pixels.
Cloning from several different spots avoids the tiled look that gives away a retouched photo. Reduce brush opacity near high-contrast edges, and build up the repair gradually.
Method 2: Patch with Selection and Copy-Paste
When the background has structure (a fence line, a horizon, a brick edge), cloning can smear it. Patching with a copied chunk preserves the structure better.
- Choose the Selection tool and pick Freehand. Automatic selection won't help you on a flat photo.
- Draw around a clean area slightly larger than the object. You can click point to point for straight edges or draw freely. Tap the starting dot to close the selection.
- Apply a bit of Feather so the patch edges blend rather than cut in sharply.
- Swipe three fingers down and choose Copy & Paste (or Cut & Paste) to put the patch on its own layer.
- Use the Transform tool to move the patch over the object. Rotate, flip, or scale it so lines and perspective match.
- Erase the patch edges with a soft brush at low opacity until the seam disappears.
Tapping the starting dot closes the selection, and the marching-ants outline then looks like it vanished. That's normal behavior, not a bug. Once closed, you can add to the selection with a new outline, or tap the minus option before closing to subtract from it.
Method 3: Paint and Smudge for Simple Backgrounds
For a speck on a sky or a cable across a flat wall, a painted fix is faster than a patch.
- Sample color by touching and holding on the canvas to open the color picker, then painting over the object with a soft brush.
- Smudge with a low-strength soft brush to blend the transitions in gradients.
- Add texture back. A smooth painted patch on a photographic background stands out. Use Adjustments > Noise or a grain brush on the repair layer to match the surrounding texture.
Keep the brush size slightly larger than the object and change colors often. A single flat color across a gradient looks wrong fast.
Removing the Background Instead of One Object
If the goal is to isolate your subject, not erase a single thing, selection and erasing both work.
Mask method
- Select the Selection tool in Freehand mode.
- Outline the subject. Staying just outside the edge is fine, and you can refine later.
- Tap Invert in the bottom toolbar.
- Swipe three fingers down and choose Cut to delete everything except the subject.
Eraser method
- Pick the Eraser and choose a brush. A hard brush leaves crisp edges; an airbrush-style soft brush leaves feathered ones.
- Use a large brush for the bulk of the background and a small one near edges.
- Zoom in to clean hard, stair-stepped edges, and feather them if the subject will sit in a new scene.
If the subject has a clearly different color from its surroundings, the Automatic selection mode can speed this up. If you have many images to process, a dedicated background-removal service or a batch tool outside Procreate will save time.
When you're done, hide the background layer and export as PNG to keep the transparency.
Finishing: Make the Repair Disappear
A good removal fails on details, not on the main fix. Check these before exporting:
- Grain and noise: Match the film grain or sensor noise across the patched area.
- Edge sharpness: A patch softer than its surroundings looks like a smudge. Sharpen slightly or use a texture brush.
- Lighting continuity: Shadows cast by the removed object need to go too. If a shadow remains, the viewer's eye will find where the object used to be.
- Repeating patterns: Look for duplicated textures from cloning, especially in foliage and clouds.
- Zoom out. Look at the image at 25% and at full-screen size. Problems you can't see at 400% often jump out at normal size.
Taking the Cleaned Photo into a Motion Pipeline
For motion designers, animators, and VFX artists, a cleaned still is usually a starting point. Procreate gives you a quick plate, but it ends where the timeline starts.
Typical hand-offs:
- After Effects: Import the PNG or layered file as a plate, matte, or texture. For moving footage, After Effects' Content-Aware Fill for video, tracking, and clone workflows handle objects that move through frames. A single repaired frame won't solve that.
- Nuke: Use cleaned stills as clean plates for patches over tracked areas, or as projection sources.
- Cinema 4D and Blender: Cleaned photos work well as textures, backdrops, or projection maps, as long as the repair holds up when the camera moves.
Where Styleframe Fits
Styleframe is an AI video and motion tool built for artistic control, and it doesn't replace manual retouching in Procreate. It picks up after you've cleaned the still. Everything is driven by your own references, clips, and keyframes, not by a single black-box prompt.
- Frames-to-Video: Set keyframes with your cleaned stills and generate the motion between them, with you controlling the start and end states.
- Restyle and Ink-and-Paint: Apply a reference-driven look to your footage or stills so a retouched photo matches a project's visual language.
- Remove Background: Isolate a subject on frames when you need a quick matte, before refining it in your compositor.
- 2D-to-3D and Turntable: Turn a cleaned single image into a dimensional asset or a rotating view.
As with any generative tool, check the results frame by frame, because AI-generated motion still needs the same review as hand-built work.
When to Leave Procreate for Another Tool
Procreate is the wrong place to finish a job when:
- The object is large and the background is intricate.
- You need to remove something from video, not a photo.
- The deliverable demands exact pixel accuracy, such as product or architectural work.
- You have dozens of images with the same problem.
In those cases, dedicated retouching software with content-aware fill, an AI eraser inside a photo editor, or a compositing pass in After Effects or Nuke will be faster and more reliable. You can still use Procreate for the final hand-painted touch.
Quick Answers
Can Procreate remove an object automatically? Not with a one-tap tool in the versions most artists use. You select, clone, patch, or paint it out manually.
What's the best method for beginners? The patch approach: select a clean area, feather, copy-paste, transform, and blend the edges with a soft eraser.
How do I keep the fix non-destructive? Work on a duplicated layer and put every repair on its own layer above it.
How do I get a transparent background after removal? Cut the background, hide any remaining background layers, and export as PNG.