How to Remove Image Background Procreate
StyleFrame Team8 min read
Procreate has no one-tap "remove background" button, so you isolate the subject with a selection and then delete or mask everything else. For flat or white backgrounds, open Selections, choose Automatic, tap the background, drag to set the threshold, then Cut. For photos and complex edges, trace the subject with Freehand selection and either invert and clear the background or apply a layer mask. Export as PNG to keep the transparency.
Why Procreate Has No Dedicated Remove Background Tool
Procreate's own documentation says it doesn't include a single tool for removing image backgrounds. It gives you selection, masking, and erasing tools, and background removal is a workflow built from them. That's fine for illustrations, scans, and stickers, but it shapes what you can expect. Clean results depend on how well the selection follows the edge, and on how much contrast separates the subject from what's behind it.
Pick the method by the type of image:
- Flat or white backgrounds (scans, sketches, logos, printable sheets): Automatic Selection
- Complex photos or soft edges: Freehand selection plus a mask
- Simple geometric subjects: Rectangle or Ellipse selection, inverted and cleared
Before You Start: Set Up the Layers
A few habits save time on every method below.
- Import your image (Actions → Add → Insert a photo, or drag it in). It lands on its own layer.
- Open the Layers panel and turn off the Background color layer. Otherwise you'll never see transparency. The white or colored canvas will keep showing through and make it look as if nothing was removed.
- Duplicate the image layer and hide the original. You now have an untouched copy to return to if a selection goes wrong.
- Check that the image layer is the active one. If you cut while another layer is active, you'll delete the wrong pixels or nothing at all.
If your canvas is smaller than the image and you want to bring in more of it, use Actions → Canvas → Crop & Resize. You can also toggle Resample there to scale the artwork. For a cutout destined for video, set the canvas to your final delivery size before you start.
Method 1: Automatic Selection (Best for White or Solid Backgrounds)
This is the fastest route for scans, hand-drawn sketches, and flat graphics.
- Tap the Selection tool (the "S" icon).
- In the bottom toolbar, choose Automatic and make sure Add is active.
- Tap the background area. Hold your finger or Pencil down and drag left or right to change the threshold. A higher threshold grabs more similar tones. Stop when the marching ants hug your subject without leaking into it.
- Tap the Actions wrench and choose Cut, or swipe down with three fingers and tap Cut in the menu that appears.
- Hide or confirm the Background color layer is off, and check the result.
Two things trip people up here:
- "It deleted the whole picture." This usually means the selection covered the entire layer, or you used Clear on the wrong selection. Check what is actually selected before cutting. Tapping Automatic on a busy area can select far more than you expect.
- Leftover specks. Automatic Selection rarely gets every pixel, especially on textured paper or watercolor. Choose the Eraser with a hard-edged brush, zoom in, and clean up the stragglers by hand. You don't need a perfect threshold on the first pass. A rough one plus cleanup is usually faster.
If the subject has colors close to the background, you can raise contrast on a temporary duplicate layer so the tool separates them more reliably, then apply the resulting selection to your real layer. Treat this as a workaround, since results depend on the image.
Method 2: Freehand Selection and Invert
When there's no clear color boundary for Automatic to find, trace the subject yourself.
- Open Selection and pick Freehand with Add.
- Zoom in and draw around the part you want to keep. Work in short, deliberate segments on tight edges.
- If you make a mistake, tap with two fingers to undo, then carry on tracing.
- Close the loop by returning to your starting point. Tapping the start dot completes the selection and makes the outline vanish into marching ants. This surprises many new users, but it means the selection is done.
- Tap Invert so the background is selected instead of the subject.
- Scrub three fingers left and right on the canvas, or use Cut, to delete the selected area.
For straight-edged or round subjects, Rectangle and Ellipse selections follow the same steps with less tracing. You can combine modes: add a rough Ellipse, then use Freehand with the minus option to carve out areas you don't want.
Freehand selections have hard, slightly stepped edges. Use Selection's Feather option (in the toolbar's selection controls) if you need a softer falloff, and keep it low so you don't eat into detail.
Method 3: Selection Plus Layer Mask (Non-Destructive)
If you want to keep the ability to fix edges later, mask instead of cutting.
- Make a Freehand selection around the subject you want to keep (not the background). Leave the loop open or complete it, as long as the subject is what's selected.
- Open Layers, tap the image layer, and choose Mask. The selection becomes the mask, and the diagonal transparency pattern appears behind your image.
- Paint on the mask with black to hide more of the image and white to bring areas back.
- When you're happy, pinch the mask layer and image layer together to merge them. Skip this step if you want to keep the mask live for later changes.
Masking is the better option for client work or anything you may revisit. A wrong cut can only be recovered by undoing, but a wrong mask stroke can be repainted in white.
Cleaning Up Edges
Edge quality decides whether a cutout looks believable in a composite.
- Halos: Light fringes from the old background show up against dark scenes. Shrink the edge by erasing a pixel or two inward with a hard eraser, or lower the selection threshold and redo it.
- Soft hair or fur: Automatic and Freehand selections can't recreate fine strands. Mask these areas with a soft brush and accept an approximate result, or use a dedicated matting tool.
- Stray islands: Zoom out and look for floating fragments, especially after Automatic Selection on textured images.
Always evaluate the result over a contrasting color, such as a dark layer under a pale subject, rather than the default checkerboard.
Export With Transparency
A cutout only keeps its alpha if you export in a format that supports it.
- Turn off the Background color layer.
- Go to Actions → Share and choose PNG (or PSD if you want to keep the layers and mask).
- Don't use JPEG, which has no transparency and will fill the empty areas with a solid color.
If the file is going to print rather than a screen, remember that a transparent background still prints on whatever paper you use. That matters for stickers and printables, where the white of the paper becomes your background.
Taking a Procreate Cutout Into After Effects
Many motion designers use Procreate to draw or prep elements, then animate elsewhere. A few practical notes:
- Resolution: Match or exceed your comp size. Scaling up a small PNG in After Effects softens edges, and Procreate's Resample uses bicubic interpolation, which can't invent lost detail.
- Layers over flattened files: If you intend to animate parts separately, export a PSD and import it as a composition with layers preserved, so elements stay independent.
- Edge fringing: If you see a light or dark rim in the comp, check the alpha interpretation in the footage settings, then tighten with a small matte choker or refine edge adjustment.
- Keep the source: Save the Procreate file with its mask intact so you can re-export when a shot calls for a cleaner edge.
When Procreate's Tools Aren't the Right Fit
Procreate suits illustration-style assets. It is slower for photographic subjects with complicated edges. If you need to remove backgrounds from many frames, from photographic references, or from generated imagery that will go into a video pipeline, a manual selection in a tablet app becomes a bottleneck.
In those cases, a dedicated background-removal tool can sit beside Procreate. A practical split is to draw and design in Procreate, use a dedicated tool where a subject needs isolating at scale or from non-flat imagery, and finish the edges in your compositor.
Quick Troubleshooting
- Nothing seems to change after cutting: the Background color layer is still visible, or the wrong layer is active.
- Whole image disappears: the selection covered the entire layer. Undo and reselect.
- Selection vanished when I tapped the start dot: that closes the loop. Add or subtract from the selection afterward using Add and the minus option.
- Background returns when exported: you exported JPEG, or the Background layer was left visible.
- Jagged edges: use a mask with a soft brush instead of a hard cut, or add a light feather.
Summary
In Procreate, removing a background means choosing the right selection method for the image. Use Automatic for flat backgrounds, Freehand with Invert or a mask for complex edges, and always work on a duplicate layer with the Background color layer hidden. Clean up edges with the eraser or mask, then export as PNG or PSD to keep transparency. For heavier or photographic jobs, pair Procreate with a dedicated tool and finish in your compositor.