How to Remove Background on Procreate
StyleFrame Team8 min read
To remove a background in Procreate, select the part of the layer you want to delete with the Selection tool (S icon), then cut it with a three-finger swipe down or with Cut from the Copy & Paste menu. Use Automatic selection for flat or white backgrounds and Freehand selection for busy ones. Export the result as a PNG with the background color layer switched off, or the transparency won't survive. Procreate has no dedicated one-tap background remover, so every method is a variation on selecting, cutting, and cleaning edges.
Before You Start: Set Up the Canvas
Background removal in Procreate is destructive by default, so a little setup saves rework.
- Match the canvas to your output. If the cutout is going into an After Effects comp, size the canvas to the resolution you need. If you scale up later with Crop & Resize and Resample on, Procreate uses bicubic interpolation, which softens fine edges.
- Keep the original untouched. Duplicate the photo layer before you cut, or import the image twice. You'll want a clean source when you redo a selection.
- Turn off the background color layer when you want to see real transparency. The checkerboard pattern tells you what is actually empty.
- Update the app. Menus shift between versions. If you can't find a tool described below, check your Procreate version first.
To bring in an image, import it from your photos or send it from your iPad's share sheet. Import into an existing canvas and the photo lands on its own layer above the background color layer.
Method 1: Automatic Selection (Best for White or Flat Backgrounds)
Automatic selection picks areas of similar color and works well on scans, product shots on white, and flat illustrations.
- Select the layer that holds your image.
- Tap the Selection tool (the S icon) and choose Automatic at the bottom.
- Make sure Add mode is on, then tap the background.
- Keep your finger or Pencil down and drag left or right to change the threshold. A higher threshold grabs more similar tones, a lower one grabs fewer.
- Cut the selection with a three-finger swipe down and tap Cut. You can also use Cut from the Copy & Paste menu at the bottom.
- Hide the background color layer to check the result.
Don't expect perfection on the first pass. Textured backgrounds like watercolor paper, photographed paper, or gradients rarely fall within a single threshold. Select as much as you can cleanly, cut, and come back for what's left.
A common beginner mistake: if the whole image disappears, you probably didn't have an active selection, or the wrong layer was targeted. A three-finger scrub with no selection clears the entire layer. Check for the marching-ants outline before you cut.
Method 2: Freehand Selection (Best for Busy Backgrounds)
When the subject sits against a cluttered background, Automatic selection can't tell what to keep. Trace the subject yourself instead.
- Tap the Selection tool and choose Freehand.
- Draw around the subject with your Pencil or finger. A dashed line follows your stroke.
- Close the loop by tapping the starting dot. Tapping that dot is what completes the selection, so the outline appearing to "vanish" is normal. It has become an active selection.
- Tap Copy & Paste. Procreate duplicates your selection onto a new layer, usually named "From selection."
- Hide or delete the original imported layer, and turn off the background color layer.
This approach is non-destructive because the original layer is still there until you remove it. It's also better for hard-edged objects like products, buildings, or devices. For straight edges, tap points to make straight line segments rather than dragging one continuous curve.
If you need to add to or subtract from a selection, use the Add and Remove modes before closing the loop. You can run several passes, adding a loose pass first and then subtracting problem areas.
Method 3: Select the Subject, Invert, Then Clear
This is a good middle route when the subject has a fairly simple shape.
- Use Ellipse, Rectangle, or Freehand selection to outline the part you want to keep.
- Tap Invert at the bottom so everything outside your shape is selected.
- Scrub three fingers left and right on the canvas to clear the selected area.
It's fast for rough isolation, and the Procreate help documentation describes it as a way to roughly remove backgrounds. Use it for quick comps and mockups rather than final-quality mattes.
Cleaning Up the Edges
Selections are rarely clean at the pixel level. A few habits help.
Erase stray specks
After cutting, zoom in and look for leftover patches, especially in corners. Use the Eraser with a hard brush for crisp edges. A soft brush will leave semi-transparent haze that shows up as a ghost on dark backgrounds.
Use Feather sparingly
Feather on a selection softens the boundary and can reduce a harsh, cut-out look. Too much feathering eats into your subject and leaves a visible glow. Apply a small amount and test on a dark backdrop.
Fix white fringes
If you removed a white background from a photo, the edge pixels often hold a light halo. Turn on Alpha Lock for the cutout layer and paint over the fringe with a color sampled from just inside the edge. This recolors existing pixels without changing the transparent area.
Preview on a contrast color
Change your background color layer to black, then to a saturated color. Halos and leftover specks that were invisible on white will show up immediately.
Exporting a Transparent PNG
This is where many people lose their transparency.
- Hide the background color layer. Deselect the layer visibility checkbox so the checkerboard shows.
- Delete or hide the original imported layer if you used Copy & Paste.
- Open Actions (wrench icon) → Share.
- Choose PNG. JPEG has no alpha channel, so it flattens transparency to a solid color.
For a motion-design handoff, test with one file before you export a batch, and check that your layers and any effects import into After Effects or Photoshop the way you expect.
If you need a single element from a sheet of illustrations, such as a sticker from a printable page, use Freehand selection loosely around it, Copy & Paste to a new layer, hide the sheet layer, and export just that element.
Common Problems and Quick Fixes
- The whole layer got deleted. No selection was active, or the wrong layer was selected. Undo and check the layer panel.
- The Automatic selection grabs part of the subject. Lower the threshold, or switch to Freehand for the problem region.
- Remnants of the background remain after export. The background color layer is probably still visible, or you exported as JPEG.
- Edges look jagged. You probably worked at a low resolution. Import at the highest resolution available and keep Resample off unless you need it.
- The cutout looks fine on white but wrong on a colored backdrop. You have semi-transparent fringe pixels. Use Alpha Lock to recolor, or erase the edge with a hard brush.
- The shape needs to stay a circle for print. Transparent areas can print oddly depending on your layout software and paper, so confirm how your print workflow handles transparency before relying on it.
Other Ways to Remove a Background
Procreate is an illustration app, and its selection tools are capable but manual. For a single image or sticker, that's usually fine. Some people send the image to an online background remover or use desktop software with a color-to-alpha function for batch work. Those can be faster for large sets of flat-color images, though you give up control over edge decisions.
When Procreate Isn't the Right Tool: Moving Footage and Pipelines
Procreate handles stills well. Things get harder when the subject is moving. Cutting out a subject from a clip means a matte for every frame, which isn't what Procreate's selection tools are built for. Most professional pipelines handle that with roto and keying in After Effects or Nuke, and that remains the right call when you need frame-accurate control.
For artists who want an AI-assisted step inside that pipeline, is one option. It's an AI video and motion tool.
A practical way to think about it: use Procreate to draw, paint, and prepare hand-made artwork, including cutouts you've cleaned by hand. Then bring that art into a motion tool when you want to take it into video. You keep your compositing workflow and the final matte decisions, and you can still refine edges in your compositor as you would with any other source.
Quick Workflow Summary
- Import your image onto its own layer and duplicate it as a backup.
- Choose Automatic selection for flat backgrounds, or Freehand for busy ones.
- Cut or Copy & Paste the subject onto a new layer.
- Clean specks with a hard Eraser, fix fringes with Alpha Lock, and preview on contrasting colors.
- Hide the background color layer.
- Export as PNG for transparency, or as a layered file if you want to keep editing downstream.
With a clean selection and a transparent export, you'll have a cutout that holds up in After Effects, Premiere Pro, or any other tool in your pipeline.