How to Reize an Image from Procreate to Print
StyleFrame Team8 min read
To resize a Procreate image for print, multiply the print size in inches by 300 to get your target pixel dimensions. Then open Actions (wrench) > Canvas > Crop and Resize, turn on Resample Canvas, enter the new size, and export as PNG, PDF, or high-quality JPEG. Scaling down from a larger canvas is safe, while scaling up always costs sharpness, so work on a duplicate and make a small test print before committing to a full run.
Understand Pixels, DPI, and Print Size First
Motion designers already think in pixels, so this part is familiar. A raster file has a fixed pixel count. DPI (or PPI) is metadata that tells a printer how large to spread those pixels. The pixels carry the detail, and the DPI number only changes how big the print comes out.
The formula is simple:
Print size in inches × target DPI = required pixels
- 5 × 5 in at 300 DPI = 1500 × 1500 px
- 8.5 × 11 in at 300 DPI = 2550 × 3300 px
- 16 × 20 in at 300 DPI = 4800 × 6000 px
- A4 (about 8.3 × 11.7 in) at 300 DPI = roughly 2480 × 3508 px
Most print shops ask for 300 DPI at final size. Large-format pieces such as posters may allow a lower DPI, so check your printer's spec rather than assuming.
This also explains the common "my image prints tiny" problem. If you paste an image into a 5×5 in canvas and it prints at 2×2 in, the pasted artwork usually has fewer pixels than the canvas, or the file's pixel dimensions don't match what you think they are. Check the pixel count in Canvas > Canvas Information before blaming the printer.
Check Your Starting Canvas
Before resizing anything, open Actions > Canvas > Canvas Information and note the current width, height, and DPI in pixels.
Then compare it with the pixel count you need:
- Your canvas has more pixels than needed: You're in good shape. Downscale to the target size, or even export as is and let the printer's editor scale it down.
- Your canvas matches the target: Change the DPI metadata if needed and export.
- Your canvas has fewer pixels than needed: You'll be upscaling. Read the upscaling section below before you commit.
Also compare aspect ratios. A 4:3 illustration won't fill a 5×7 card without cropping or extra background. Decide whether to crop, extend the canvas, or repaint the edges before you resize.
Resize with Crop and Resize (Step by Step)
Always work on a copy. Duplicate the artwork in the Gallery, and rename it with the print size, such as "Card_5x7_300dpi".
- Open the duplicate and tap the wrench icon to open Actions.
- Go to Canvas and tap Crop and Resize.
- If your original canvas was created in inches, Crop and Resize shows inches on the sliders and number pad. Otherwise, calculate the pixel dimensions you need.
- Turn on Resample Canvas. With it on, Procreate scales the artwork along with the canvas. With it off, you change the canvas boundary and crop or extend the artwork instead.
- Enter the new width and height. Keep proportions linked unless you intend to crop. Set the DPI to 300.
- Tap Done and inspect the result at 100% zoom.
A few things to watch for:
- Linked dimensions: With resampling on, changing one side can shift the other to preserve the ratio. If you need exact numbers in both directions, fix the ratio first by cropping, then resample.
- Order of operations: Turning on Resample after typing measurements can crop instead of scale. Set the toggle first, then enter values.
- Device limits: Procreate caps the maximum canvas size based on your iPad's memory, and larger canvases allow fewer layers. A 24 × 36 in poster at 300 DPI (7200 × 10800 px) may not be possible on older iPads. If you hit that limit, drop to a lower DPI such as 250 for large formats or build the final layout elsewhere.
The Alternative: Build a New Canvas at Print Size
If the aspect ratio changes, or you want the original left completely untouched, a second method often works better:
- Create a new custom canvas at the exact print dimensions and 300 DPI.
- Export the original artwork as a PNG, which is lossless.
- Insert the PNG into the new canvas, then scale and position it.
- Repaint or extend the edges where needed.
This gives you control over composition, bleed, and safe margins. You decide what happens at the borders instead of letting a resample guess.
Add Bleed and Safe Margins
Many print shops want a small bleed on every side, with important content kept inside a safe margin from the trim edge. Check your printer's specs for the exact values, and add them to your canvas dimensions. For example, a 5 × 7 in card with 0.125 in bleed becomes 5.25 × 7.25 in, or 1575 × 2175 px at 300 DPI. Extend the background art into the bleed area so no white sliver shows after trimming.
Downscaling vs. Upscaling
Downscaling discards pixels, so quality holds up well. If you're dropping from A3 to A5, you have nothing to worry about.
Upscaling has to invent pixels. Procreate's resample tools interpolate between existing pixels, which softens edges and can make fine line work look blurry. Whether that matters depends on your style. Soft gradients and painterly textures often survive a modest increase, while crisp ink lines and small type show the loss quickly.
If you have to upscale:
- Do it once. Every transform re-renders the pixels, so repeated scaling compounds the blur. Settle on the final size in one step.
- Choose the interpolation method. In the Transform tool, the interpolation setting (Nearest Neighbor, Bilinear, Bicubic) affects the result. Bicubic generally gives the smoothest scaling for gradients and detail, and Nearest Neighbor can suit crisp line art, though it can look pixelated.
- Keep increases modest. The larger the jump in size, the more visible the artifacts become.
- Consider a dedicated upscaler. AI-based upscalers can reconstruct plausible detail from low-resolution art, and many offer free trials. Test with your own style, since results vary and these tools are essentially generating detail that wasn't in the original.
- Redraw if the piece is going large. For a big gallery print, repainting key elements at a higher resolution may be the only way to guarantee clean results.
Pick the Right Color Profile
Procreate defaults to RGB, and you can print from RGB without converting to CMYK. The catch is that printers use ink instead of emitted light, so colors tend to look different on paper.
- If the print is the final product, consider setting a CMYK profile when creating the canvas so you see closer-to-final colors as you work.
- If the artwork is primarily for screen and print is secondary, stay in RGB.
- If a print service asks for a specific profile, follow its spec and ask whether it will convert for you.
If you've already finished in RGB, a test print will show you where colors drift.
Export in the Right Format
- PNG: Lossless, supports transparency, and is a safe master. Files can be large.
- PDF: Useful for print shops that want a single document.
- JPEG: Smaller and widely accepted. Export at maximum quality, since JPEG compression is lossy.
Keep the lossless master, and generate JPEGs only when a service requires them.
Make a Test Print
Screens are forgiving, and paper isn't. Print a section of the artwork at 100% scale, covering an area with fine detail, a gradient, and saturated color. You don't need the whole image on the sheet, just enough to judge sharpness and color. If it looks right on paper, it'll look right at full size.
When Your Procreate Art Becomes Motion
Many animators and motion designers use Procreate for boards, character art, and style frames, then take that work into video. The print and motion workflows share the same pixel logic, but the targets differ: video delivery is measured in pixels like 3840 × 2160, and print is measured in inches at 300 DPI.
If your illustration is also the basis for an animated piece, keep a high-resolution master. Export the Procreate artwork at the largest clean size you can, then derive both the print version and the video frames from it.
is a motion tool that fits at that point in the pipeline, when the same artwork needs to move. It won't replace the resize steps above for a printed poster.
If you pull stills from an image sequence for print, apply the same pixel-math check. Confirm the frame's resolution covers your print size at the DPI your printer requires, and downscale or limit the print size accordingly.
Quick Pre-Print Checklist
- Print size multiplied by DPI gives your target pixels.
- You're working on a duplicate, not the original file.
- Crop and Resize has Resample Canvas on, and DPI is set to 300 (or your printer's spec).
- The aspect ratio matches the print format, with bleed added if required.
- Any upscaling happened once, with Bicubic interpolation, and was kept modest.
- The color profile suits the output.
- You exported a lossless master plus the printer's requested format.
- You made a 100% test print of a representative area.
Get the pixel math right at the start, resample once, and verify on paper. That sequence covers nearly every print-sizing problem Procreate artists run into.