How to Recreate Wes Langs Style in Procreate
StyleFrame Team9 min read
To recreate Wes Lang's style in Procreate, draw confident, slightly rough black linework of skulls, reapers, horses, birds, and Americana figures on its own layer. Add loose handwritten scrawl, flat or scumbled color fields in a limited palette, and layered distress such as scratches, drips, and faded paint. Keep ink, lettering, color, and wear on separate layers so you can edit them freely or animate them later. If the piece is headed for motion, a finished Procreate frame can serve as the style reference in Styleframe's Restyle or Ink-and-Paint tools.
What You're Actually Recreating
Lang's work sits between tattoo flash, outsider-leaning abstraction, and post-pop collage. He learned partly through an apprenticeship in a tattoo shop and cites painters like Twombly, Guston, Basquiat, and Kline. His recurring imagery includes grim reapers, skulls, horses, birds, roses, Native American chiefs, and fallen musicians. Text runs through nearly everything, often as lyric fragments, mantras, and cryptic notes that sit inside the composition instead of captioning it.
Before opening Procreate, break the look into four parts you can control separately:
- Line: bold, tattoo-influenced contours with deliberate roughness.
- Text: hand-scrawled phrases that behave like marks, not typography.
- Color: restrained palettes, often with off-white or aged grounds and a few punchy accents.
- Wear: scratches, overpainting, smears, and ghosted underlayers that make a piece feel lived-in.
Study his approach, but build your own motifs. Copying specific compositions or tracing existing pieces is a different thing from working in a style, and it causes problems for client work.
Set Up Your Canvas and Palette
Start larger than you think you need. If the art may be animated or composited in After Effects, a canvas around 4000 × 2250 px (or your project's aspect ratio at 2x) gives you room to scale, push in, and crop. Set the color profile to match your delivery pipeline. Check which profile your Procreate canvas uses, and switch to sRGB if your comp is sRGB to avoid shifts later.
Build a palette of five to seven colors before drawing:
- A warm off-white or paper tone for the ground
- A near-black for ink (avoid pure #000000, which looks sterile against aged paper)
- One or two earth tones, such as dusty tan, oxblood, or faded olive
- One or two saturated accents like a sun-bleached red, mustard, or a turquoise
- A mid-gray for underdrawing and smudge work
Save it as a palette in Procreate so every layer pulls from the same set. Limiting yourself matters more than picking the "right" colors.
Build the Linework
Create a layer group called Ink and sketch loosely first on a separate layer at low opacity. Lang's drawings read as confident but not polished, so don't fuss over symmetry.
Brush choice. Use a monoline or dry-ink brush with some pressure response. Procreate's Technical Pen and Studio Pen work for clean contours, while Dry Ink or a chalky charcoal brush gives edges some tooth. Try mixing two: a firm pen for primary outlines and a textured brush for hatching and shading.
Technique.
- Draw from the shoulder, not the wrist, for longer, more committed strokes.
- Let lines overshoot corners and don't close every shape.
- Use heavier line weight on the outer silhouette and thin, scratchy lines inside, much like tattoo flash.
- For skulls and reapers, exaggerate the dark eye sockets and teeth, then add cross-hatching for volume instead of soft gradients.
- Turn off StreamLine or set it low. Smoothing removes the shake that makes the line feel human.
Draw each major motif (skull, horse, bird, figure) on its own layer inside the Ink group. This becomes important if you animate or rearrange elements later.
Add the Scrawled Lettering
Text is one of the strongest signals of the look, and also the easiest to get wrong. Don't use a font. Write directly on a new Lettering layer with a pen or pencil brush.
- Write phrases you would actually say: song lines, short affirmations, dates, notes to self.
- Vary size and baseline within a single line. Let letters lean, collide, and run off the edge.
- Mix cases without a system.
- Cross out, retrace, or half-erase some words so the layer shows revision.
- Place text over and under imagery, not only in empty areas.
A useful trick is to write the text in two passes. First do a bolder, looser pass in a light color, then overwrite the same words in near-black with a thinner pen, slightly offset. The ghosting adds depth that a single pass lacks.
Rasterize the text layer if you used any text tool so you can scratch, smudge, and erase into it.
Lay in Color Fields and Paint Texture
Put color on layers below the ink so the linework stays dominant. Create a group called Color with separate layers for the ground, large blocks, and accents.
- Ground: fill with your off-white, then add a subtle paper or canvas texture using a texture brush or an imported scan on Multiply at low opacity.
- Blocks: use a gouache or flat acrylic-style brush to lay in shapes that don't perfectly match the line. Misregistration, where color slides past or falls short of the ink, is a quick way to get that printed, layered feel.
- Accents: reserve your saturated colors for small areas, like a rose, a banner, or a patch of sky. Too much saturation flattens the mood.
- Scumbling: with a dry brush or sponge-like texture, drag a lighter color over darker areas so the underlayer peeks through.
Use Clipping Masks for shading and highlights so you can adjust them without damaging the base color. Alpha Lock is helpful for quickly recoloring a motif but destroys non-destructive editing, so prefer clipping.
Layer on Distress and Wear
This is where the piece stops looking digital. Make a Wear group above color but, in some places, below the ink. Splitting wear into over-ink and under-ink layers gives you more control.
- Scratches and scuffs: use a scratch or grain brush in the paper tone to cut into the ink layer, or erase with a textured eraser.
- Drips and splatters: a splatter brush in one accent color, applied sparingly, with a few intentional drips pulled by hand.
- Smudges: use the Smudge tool at low strength on the color layer only, never on crisp ink.
- Overpainting: block out an area in the ground color with a semi-opaque brush, then redraw on top. The ghost of the previous image is part of the look.
- Fade and grain: add a Noise or Grain adjustment on a flattened copy, then mask it back in so it's not uniform.
Stop when the piece feels slightly unfinished. Over-distressing everything makes it read as a filter instead of a gesture.
Structure Layers for Motion
If you're working for a title sequence, music visual, or motion piece, set up the file for After Effects from the beginning:
- Name layers clearly (Skull_Ink, Horse_Color, Wear_Scratches).
- Keep each major element on its own layer so it can be parallaxed, nudged, or swapped.
- Leave overlap and extra drawing beyond the visible edges of elements so they can move without revealing gaps.
- Export as a layered PSD for After Effects or as individual PNGs with transparency. Check that blend modes survive the export, since Procreate's modes don't always translate perfectly.
- Keep your textures (paper, grain, scratches) as separate layers so you can animate them at a different rate than the art. Cycling a few hand-drawn grain frames at a low frame rate creates the "boil" that keeps static art alive.
For hand-drawn motion in Procreate itself, Animation Assist works for short loops, like a flickering eye or a swaying bird, though longer sequences are usually easier to assemble in After Effects.
Carrying the Look Into Video
A single illustration is one thing; keeping the same style consistent across many frames is another. Hand-redrawing every frame in this style is slow, and applying a generic filter to footage tends to wash out the line quality that defines it.
This is where Styleframe fits as a practical extension. It offers reference-driven tools for restyling footage, animating keyframes, and post-production. A workflow might look like this:
- Use your Procreate piece as the style reference. In Restyle or Ink-and-Paint, the reference image guides how footage or generated frames are rendered, so your linework, palette, and texture inform the output.
- Animate between keyframes. Set up keyframes (for example, two Procreate states of a figure) and animate between them, instead of hoping a text prompt gets it right.
- Bring it into your comp. Styleframe can export image sequences, so the result can drop into After Effects like any other plate.
The advantage is that your hand-drawn decisions stay in charge. The tool extends them to more frames, but you still composite, grade, and add your own wear on top.
Common Mistakes to Avoid
- Using a font for the text. It breaks the handmade feel immediately.
- Too clean, too even. Perfect symmetry and uniform line weight look like vector clip art.
- Palette creep. Adding colors "just because" dilutes the style. Stick to your saved palette.
- Flattening too early. If you merge ink and color, you lose the ability to adjust wear and animate parts.
- Copying instead of translating. Take the principles (line, scrawl, palette, wear) and apply them to your own subjects and phrases.
- Ignoring resolution. Low-res source art limits what you can do with push-ins or restyling later.
Quick Checklist
- Canvas large enough for scaling and cropping, with the right color profile
- Saved palette of five to seven colors
- Ink, Lettering, Color, and Wear in separate layer groups
- Handwritten, not typed, text
- Misregistered color and visible overpainting
- Wear layers both above and below the ink
- Layers named and exported for After Effects
- A finished frame saved at full resolution for use as a style reference
Work through those steps once on a single piece, then reuse the file structure as a template. After a few rounds, the look becomes a repeatable system you can hand off to a comp, a restyle pass, or a full motion sequence without starting over.