How to Record Procreate Video
StyleFrame Team8 min read
Procreate records a time-lapse of every canvas automatically, so to record a Procreate video you only need to draw, then go to Actions → Video → Export Time-lapse Video and choose Full length or 30 Seconds. To control quality, set the time-lapse resolution (1080p up to 4K) and recording quality when you create a custom canvas, because those settings can't be changed afterward. If you want a real-time recording that shows menus and tools, use the iPad's built-in Screen Recording instead.
Two Ways to Record in Procreate
Procreate offers two different kinds of video, and they suit different jobs.
Time-lapse recording is built in and on by default. It stores each stroke and other canvas action as a frame, skipping undone actions, and compiles them into a sped-up replay. It shows only the canvas, with no interface, menus, or hesitation between strokes.
iPad Screen Recording captures everything on screen in real time: the Gallery, the brush picker, layer panels, and your pauses. It's the right choice for tutorials, client walkthroughs, and any footage where timing and interface matter.
If you're after a speed-drawing clip or a process reveal, use time-lapse. If you're teaching or documenting a technique, use screen recording. Many artists record both and cut between them.
One caveat: time-lapse isn't available in Procreate Dreams. It's a feature of Procreate for iPad and Procreate Pocket.
Set Up the Time-lapse Before You Draw
Time-lapse is already active on any new canvas, at 1080p with Good quality. That's fine for a quick social post. For footage you plan to composite, grade, or upload at higher quality, configure it before you start.
- In the Gallery, tap the + button at the top right.
- Tap the Custom Canvas icon (two rectangles with a small plus) in the New Canvas menu.
- Set your canvas size as usual.
- Tap Time-lapse settings.
- Choose a resolution from 1080p up to full 4K.
- Choose a quality level, from Low (small files, easy to share) to Lossless (large files, no loss of detail).
- Optionally turn on HEVC, a compression format that is off by default.
- Tap Create.
The key constraint is that these settings are locked in once the canvas exists. If you started a piece at 1080p Good and later decide you need 4K, you can't upgrade the recording, so make the decision at canvas creation.
Which Settings Make Sense
- Social clips and quick shares: the 1080p Good default is enough.
- Footage for a YouTube video or a client reel: choose a higher resolution and quality, since you'll likely scale and recompress it in an editor.
- Material you'll cut, speed-ramp, or composite: choose the highest quality your storage allows. Lossless files get large quickly, so check free space on the iPad first.
- HEVC: it's a compression format aimed at advanced motion graphics workflows. Check that your editing setup handles HEVC cleanly before relying on it.
Control What Gets Recorded
Pause and Resume Recording
You don't have to record the whole session. To leave out a section, such as a false start or a rough cleanup pass:
- Tap Actions → Video.
- Toggle Time-lapse Recording off.
- When Procreate asks about the existing video, choose Don't Purge.
Be careful with that prompt. Purge deletes everything recorded on the canvas so far, and it can't be undone. Don't Purge simply pauses. Toggle the recording back on when you want to continue.
Pausing is a cheap way to tighten a video before it reaches an editor. Skipping the dull stretches in-app means less trimming later.
Keep Reference Images Out of the Video
If you import a reference photo and don't want it to appear in the final replay, import it as a private layer. Open the Actions menu, go to Add, and instead of tapping the import option, swipe it to the left with one finger. A hidden option, Insert a private photo, appears. Anything on that private layer stays out of the time-lapse. Keep drawing on non-private layers so the recording continues.
Preview Before You Export
Tap Actions → Video → Time-lapse Replay to watch the recording inside Procreate. It loops at 30 frames per second, shows a runtime counter at the top right, and lets you scrub by dragging left or right across the canvas. You can pinch-zoom while it plays. Tap Done to return to the artwork. A quick replay can reveal gaps or an accidentally paused section before you export.
Export the Time-lapse
- Tap Actions → Video → Export Time-lapse Video.
- Choose Full length or 30 Seconds.
- Pick a destination. Anything connected to the iOS Files interface works.
Full length compiles your entire process into one high-speed video of variable length. It can be long, with a large file, but it gives you the most material to edit.
30 Seconds trims the recording to half a minute by dropping frames. Procreate's algorithm tries to keep the most important ones, and the densest coverage tends to fall early in the piece, when the image changes fastest. It's a good fit for social posts, but it gives you less to work with in a timeline.
If you're delivering to an editor or cutting your own video, export Full length. You can always speed it up or trim it later, but you can't recover frames the 30-second version removed.
Record in Real Time with Screen Recording
When you need to show the interface, record your voice, or capture your actual drawing speed, use iPadOS Screen Recording.
- Open Settings → Control Center and add Screen Recording.
- Open Control Center. The gesture depends on your iPadOS version; in iOS 12 it was a swipe in from the top-right corner.
- Tap the record button and wait for the three-second countdown.
- Switch to Procreate and work.
- Stop recording the same way you started it, from Control Center.
This records everything visible, including the Gallery, brush menus, layer panels, and Actions settings. It also keeps recording if you leave Procreate for another app, so close out anything you don't want in the clip.
Screen recordings get large fast. Trim them on the iPad or in your desktop editor, and compress them if you need to share them quickly. Your project's time-lapse and a screen recording are independent, so you can run both on the same piece.
Troubleshooting Common Problems
- The time-lapse is the wrong resolution. The settings are fixed at canvas creation. Create a new custom canvas with the right settings, or accept the existing quality for that piece.
- The video is missing a section. You probably toggled recording off. Check Actions → Video.
- The recording is gone. Choosing Purge when the recording prompt appeared deletes it permanently.
- The export is too long or too big. Use the 30-second option for sharing, or compress the full-length file in an editor.
- The iPad is running out of storage. Long, high-quality time-lapses take real space. Export finished projects and clear footage you no longer need.
- No time-lapse option appears. If you're working in Procreate Dreams, it isn't supported there.
Bring Procreate Footage into a Motion Pipeline
For motion designers and VFX artists, a Procreate time-lapse is often raw material, not a finished clip. A few habits make it easier to use.
Transfer the file cleanly. Export through Files or any connected service, and keep the original export so you always have an untouched master.
Check the frame rate. The in-app replay runs at 30 frames per second. When you place the exported video in After Effects or Premiere Pro, check its frame rate and make sure your composition matches it, or deliberately conform it. Time remapping a sped-up stroke sequence can look uneven, since the footage is built from discrete actions rather than continuous motion.
Use it for process reveals. Time-lapse footage works well as a picture-in-picture element, a wipe-on reveal, or a lower-third insert alongside the final render. Cut to the finished artwork exported at full resolution instead of relying on the video's last frame.
Pair it with screen recording. Use the time-lapse for pacing and the screen capture for explanation, and cut between them in your editor.
Where Styleframe Fits After the Recording
A time-lapse documents how a drawing was made. Often you then want to take that artwork somewhere new, and is one option to explore. Your Procreate time-lapse remains your behind-the-scenes footage, and the finished artwork can feed into new work.
Quick Reference
- Time-lapse is on by default at 1080p, Good quality.
- Change resolution (up to 4K) and quality (Low to Lossless) only when creating a custom canvas.
- Pause with Actions → Video, and choose Don't Purge to keep what you've recorded.
- Hide references with a private photo import (swipe the import option left).
- Replay at Actions → Video → Time-lapse Replay.
- Export Full length for editing, or 30 Seconds for fast sharing.
- Use iPad Screen Recording when you need the interface, voiceover, or real-time pacing.
- Time-lapse isn't available in Procreate Dreams.
Set your recording options before the first stroke, export full-length for anything headed to an editor, and use screen recording when the process itself is the story.