How to Put Text in a Circle Procreate
StyleFrame Team9 min read
Procreate has no native text-on-path feature, so you put text in a circle by either bending a text layer with the Transform tool's Warp mode or placing and rotating each letter by hand around a circular guide. The manual method is slower but gives precise spacing and baseline control. If you need true type-on-path, build it in Illustrator, Affinity Designer, or After Effects and bring the result back into Procreate as an image.
Why Procreate Can't Just Type on a Circle
Photoshop and Illustrator let you draw a circle, click on it with the type tool, and have the text follow the outline. Procreate's text tool, added later in the app's life, doesn't offer this. Users have asked for text on a path in Procreate's feedback forum since text arrived, and many of them still finish circular lettering in other apps. Until that changes, you have two options inside Procreate:
- Warp: quick, approximate, and fine for gentle arcs.
- Manual placement: slower, but it lets you control letter spacing, rotation, and optical balance.
For motion work, the choice also depends on whether the circular text will be static art or something you'll animate later. More on that below.
Set Up a Circular Guide First
Both methods benefit from a guide. It takes a minute and prevents most of the usual problems, such as off-center rings and uneven letter heights.
- Find the canvas center. Open Actions > Canvas > Drawing Guide > Edit Drawing Guide, and raise the grid size to its maximum. The faint horizontal and vertical lines now mark the exact middle of the canvas.
- Draw the outer circle. On a new layer, draw a circle with any monoline brush. Hold at the end of the stroke so QuickShape kicks in, and touch the canvas with a second finger to lock it to a perfect circle. Resize and center it using the guide.
- Draw an inner circle. Duplicate the layer and shrink the copy, centered on the same point. The gap between the two circles should roughly equal your letter height (cap height), so the letters sit neatly in the band.
- Group and dim the guides. Put both circles in a group and lower the opacity so they don't distract.
If your design includes a central mark, such as a logo or emblem, make sure the outer circle touches or sits just outside its edge so the text frames it cleanly.
Method 1: Bend a Text Layer with Warp
This is the fastest route for a shallow curve, such as a banner arc over a badge.
- Add text from Actions > Add > Add Text. Choose a font and set the size so the text length matches the arc you want.
- Tap the text layer to rasterize it. Warping works on pixels, so you lose live text editing. Duplicate the text layer first and hide the copy as a backup.
- Open the Transform tool and switch to Warp mode.
- Drag the mesh handles so the baseline follows your guide circle. Work in small adjustments, pulling the ends down and the center up (or the reverse for bottom text).
- Check the letter shapes against the guide. Warping stretches glyphs, so letters near the ends of the arc often get skewed or thinned.
Where it works: arcs covering a small portion of a circle, quick social graphics, and placeholder layouts.
Where it breaks down: full rings, tight radii, and any design where even letter rotation matters. Warp distorts letters instead of rotating them, so a full circle of text looks uneven. A rasterized warp also can't be fixed later without redoing the work.
Method 2: Place Letters Manually Around the Circle
This is the better method for logos, seals, and badges. Procreate itself does little to help here, but the process is reliable.
Step 1: Type and split the text
Add your text and rasterize it. To rotate letters independently, each one needs its own layer or selection. Two common approaches:
- Type each letter as its own text layer, then rasterize each one. Slower to set up, but each letter is easy to select and move.
- Rasterize the whole word, then use the Selection tool (freehand or rectangle) to isolate each letter, and cut it to its own layer.
Spacing matters, so decide your tracking before splitting. It's much easier to fix spacing while the word is still one piece.
Step 2: Position the first and last letters
Place the first letter at the start of your arc and the last letter at the end. Anchor the letters' baselines on the outer edge of the inner circle (for text sitting on the outside of the ring). Placing the end letters first gives you the full span and prevents running out of room.
Step 3: Rotate and place each letter
For each letter:
- Select its layer and open the Transform tool.
- Set Magnetics or Snapping on if it helps, then move the letter so its center sits on the guide band.
- Rotate the letter so its baseline is tangent to the circle at that point. The bottom of each letter should point toward the circle's center.
- Nudge it into position. Check the gaps visually: curved layouts need slightly different spacing than straight text, because letter shapes (an "I" versus a "W") occupy space differently.
Work from the middle letter outward on both sides if the text is symmetrical. You'll find the center point fast and avoid drift.
Step 4: Handle the bottom text
Text along the bottom of a circle should read left to right with the letters upright, which means it runs counter-clockwise and the tops of the letters point toward the center. Use the inner circle as the baseline and flip the rotation logic: the letter tops face inward. Many beginners copy the top text and mirror it, which produces upside-down or backward lettering. Build the bottom text separately.
Step 5: Merge and clean up
Once everything is placed, hide the guide group and look at the overall rhythm. Zoom out to check for uneven gaps, then fix them before merging the letters into one layer. Keep an unmerged copy of the group in case the client asks for a change.
Method 3: Use a Path-Based Tool, Then Bring It Back
If the text needs to stay editable or the layout is complex, build it where type-on-path is native:
- Illustrator, Photoshop, or Affinity Designer: draw a circle, use the type-on-path tool, and export a transparent PNG or SVG. Forum users note that Affinity's path controls can be fussy, so expect some trial and error with direction and flipping.
- Over (mobile app): mentioned by Procreate users as an on-tablet option with text curving. Some users report that the free tier limits fonts while still allowing curves, but the subscription terms may have changed, so check before relying on it.
- After Effects: covered below, and the most useful for motion work.
Import the result into Procreate as a photo or file, then add hand-drawn texture, shading, or lettering on top.
Tips for Cleaner Circular Text
- Work large. Start with a big canvas so rotated letters stay sharp when you scale down.
- Use consistent letter height. Mixed fonts or sizes make the curve feel off, and the guide band exposes this quickly.
- Kern optically. Round letters (O, C) can sit closer than straight-sided ones (I, H), and curved baselines make mistakes more visible.
- Keep a vector or layered master. Export a transparent PNG for compositing, and keep the layered .procreate file for revisions.
- Check at final size. Thin strokes on tight circles can break up when downscaled, especially for video delivery.
If the Circular Text Needs to Move: Build It in After Effects
For motion designers, the real question is often not "how do I draw this" but "how do I animate this." Procreate's Animation Assist is frame-based, so it suits hand-drawn animation rather than parametric text motion. For spinning or revealing a ring of text, After Effects handles the heavy lifting:
- Create a text layer and draw an ellipse mask (hold Shift for a perfect circle) on the same layer.
- Open Text > Path Options and set Path to that mask.
- Use Reverse Path, Perpendicular To Path, and Force Alignment as needed.
- Animate First Margin to rotate the text around the ring, or animate the mask itself.
You can still use Procreate for what it does best: hand-drawn letterforms, textures, or ornamental elements. Export those as transparent PNGs and combine them with live circular type in your comp. Inconsistent kerning on a manual Procreate ring is hard to fix later, so if the type is purely typographic and animated, build it in AE and use Procreate for the art around it.
Where Styleframe Fits After Procreate
Once you have a finished circular lettering design, whether a seal, badge, or title ring, you may want to turn it into moving footage or explore stylized variations. Styleframe is an AI video and motion tool built for artistic control rather than one-click output. It's driven by your own references, clips, and keyframes.
A few practical ways it can work with a Procreate-made design:
- Frames-to-Video: use keyframes from your lettering as start and end frames, and generate the motion between them.
- Restyle and Ink-and-Paint: apply a reference-driven look, such as hand-inked or painted, to flat lettering or the footage it sits in.
- Remove Background and 4K Upscale: isolate an element, and bring the result up to production-ready 4K.
- 2D-to-3D and Turntable: explore dimensional versions of a badge or emblem.
Iteration is non-destructive, so you can compare versions without losing earlier ones. Output exports as image sequences, so it slots into an existing After Effects or Nuke compositing workflow rather than replacing it. Keep live type in AE where precision matters, and use Styleframe for the stylized or illustrative layers around it.
Quick Reference
Procreate can produce clean circular text, but it asks you to do by hand what vector tools do automatically. Pick the method based on how the text will be used: warp for speed, manual placement for polish, and After Effects when the ring needs to move.