How to Put Photo Textures Over a Painting in Procreate
StyleFrame Team8 min read
To put a photo texture over a painting in Procreate, open the painting, tap Actions (wrench) > Add > Insert a Photo, and pick your texture. Scale it to cover the canvas with Uniform transform on, then set the texture layer's blend mode to Multiply, Overlay, or Soft Light. Lower the opacity until the grain is visible without dulling your colors. For finer control, clip the texture to specific layers, mask areas out, or stack two texture layers at low opacity.
What You Need Before You Start
You need a finished (or nearly finished) painting and a texture photo that is at least as large as your canvas. If the texture is smaller, you'll upscale it and soften the grain. A few preparation points save time later:
- Match or exceed canvas resolution. A 4000 px texture on a 3000 px canvas gives you room to crop and reposition without resampling.
- Save textures where Procreate can reach them. Insert a Photo pulls from your camera roll, so keep textures in a dedicated album. Insert a File pulls from the Files app. Dragging an image in from another app using Split View also works.
- Choose textures with even lighting. Photos with a strong gradient or a hot spot will add unwanted shading across your painting. Shoot or select flat, evenly lit surfaces: paper, canvas, plaster, concrete, fabric, or scanned watercolor stock.
Good sources include your own photographs of walls and fabrics, scans of real paper and canvas, free stock libraries, and commercial texture packs.
Step-by-Step: Adding a Photo Texture Over a Painting
1. Insert the texture
Open your painting, tap the wrench icon, choose Add, then Insert a Photo (or Insert a File if the texture lives in Files). The image lands as a new layer at the top of your stack, which is where you want it for a global texture.
2. Scale and position it
With the Transform tool active, switch to Uniform so the photo doesn't stretch, then drag a corner handle until the texture fully covers the canvas. Snapping helps align edges. If the texture has visible directional grain, such as canvas weave or brushed paper, rotate it so the grain runs the way real material would sit.
3. Change the blend mode
Tap the N on the texture layer to open blend modes. The most useful options for textures are:
- Multiply: darkens using the texture's shadows. Good for paper grain and canvas tooth on light paintings.
- Overlay: adds contrast, brightening and darkening together. It keeps color punchier than Multiply.
- Soft Light: a gentler version of Overlay, good for subtle grain on already contrasty work.
- Linear Burn: a stronger darkening mode for aged or gritty looks.
Dark paintings often disappear under Multiply because the blend can't darken pixels that are already dark. For those, try Overlay, Soft Light, or Screen with an inverted or light-on-dark texture.
4. Reduce opacity
Drag the layer opacity down. Many Procreate users keep texture layers at fairly low opacity, with some using around 10%, though the right number depends on the photo's contrast and the look you want. Zoom to 100% and also check at fit-to-screen size. A texture that reads well zoomed in can vanish at full view, and one that looks right at full view can look muddy up close.
5. Fix dulled colors
A common complaint is that the texture washes out the painting. Any texture layer changes the colors beneath it, because otherwise it would be invisible. Three fixes help:
- Double up the layers. Duplicate the texture. Keep one on Multiply to bring out the grain, and set the other to Overlay to restore brightness. Keep both at low opacity.
- Desaturate the texture. Open Adjustments > Hue, Saturation, Brightness on the texture layer and pull saturation to zero. A color cast from the photo is often the real source of the dull look.
- Adjust levels with Curves. Brighten the texture's midtones so Multiply darkens less overall, or increase its contrast so the grain pops at a lower opacity.
Controlling Where the Texture Appears
A full-canvas texture is the fastest approach, but a painting usually benefits from targeted application.
Clipping masks
Tap the texture layer and choose Clipping Mask to restrict it to the layer directly below. If your painting is built from separate layers, you can clip different textures to different elements: rough canvas on a background, a softer paper grain on a figure, grit on a building. Group layers first if you want one texture to apply across several of them.
Layer masks
Tap the texture layer and add a Mask. Paint with black to hide the texture and white to reveal it. Use a soft brush at low flow to keep faces, focal points, or highlights cleaner while edges and shadows carry more grain. This is the closest Procreate gets to the way compositors control a texture pass with a matte.
Blur and sharpen
If the texture is too busy and competes with brushwork, apply a small Gaussian Blur to soften it. If it looks flat after scaling, a touch of Sharpen can bring back tooth.
Stacking textures
Two textures at low opacity can feel more organic than one at high opacity. Pair a fine paper grain with a larger, softer stain or mottling pass, and use different blend modes for each. Offset them so repeating patterns don't line up.
Choosing the Right Texture for the Painting
Match the texture to the medium you want the piece to suggest:
- Oil or acrylic look: canvas weave, linen, or gesso brush marks. Keep the scale realistic.
- Watercolor look: cold-press paper with visible tooth, ideally with Multiply so the grain appears in the lights.
- Gouache or illustration: a soft paper grain at low opacity, which adds warmth without competing with line work.
- Gritty or distressed look: concrete, rust, or dust photos on Overlay or Linear Burn.
Scale matters. If the grain is too large, the painting looks like it's been printed on an oversized fabric. If it's too small, it reads as noise or JPEG artifacts. Resize the texture until the texture's features feel proportionate to your brushstrokes.
Tiling Smaller Textures
When your texture is smaller than the canvas, duplicate the layer, offset the copies so the edges meet, and merge them. Seamless textures make this easy. For non-seamless photos, hide the seams with a layer mask and a soft brush, or reflect a duplicate with Flip Horizontal so edges mirror. Check for repeating patterns, which are easy to spot in uniform areas such as skies and backgrounds.
Keeping the Process Non-Destructive
Leave texture layers separate until you're sure about the look. Name them, and group them so you can toggle the whole texture treatment on and off to compare. Duplicate the painting file before merging anything. If you plan to share a flat version, export PNG or JPEG for the final and keep a layered Procreate or PSD file for revisions.
Before exporting, zoom to 100% and inspect edges, shadows, and any area where the texture might create banding or moiré.
Taking Procreate Paintings Into a Motion Pipeline
If the painting is headed for animation or compositing, think about the texture as its own element rather than baking it in.
- Export layers separately. Export the painting without the texture, plus the texture as its own layer or file. A layered PSD can carry the structure into After Effects, though you should verify how blend modes translate, since support varies between applications. Rebuilding Multiply or Overlay inside After Effects takes seconds and gives you exact control.
- Animate the texture independently. In After Effects, a static paper grain on top of moving content tends to read as a dirty screen. Offsetting or cycling a few texture variations at low frame rates can produce a hand-made "boil" look. Because the texture sits on its own layer, you can change it without touching the painting.
- Keep the plate clean for 3D or VFX. If you're using the painting as a texture in Cinema 4D or Blender, or as a matte painting in Nuke, apply the grain at the end of the comp so that it isn't distorted by camera moves or projection.
Troubleshooting Common Problems
- Texture looks stretched: Undo, turn on Uniform in Transform, and rescale from a corner.
- Painting looks muddy: Desaturate the texture, lower opacity, or switch from Multiply to Soft Light.
- Texture is invisible on dark areas: Use Overlay, Soft Light, or Screen instead of Multiply.
- Seams are visible: Mask the seam with a soft brush or mirror the duplicate.
- Texture changes when exported: Check that the document color profile matches your target, and compare the export at 100% before delivering.
Quick Workflow Summary
- Insert the texture photo on top of your painting.
- Scale it uniformly to cover the canvas.
- Set the blend mode, typically Multiply, Overlay, or Soft Light.
- Lower the opacity, desaturate or adjust curves if the colors dull.
- Use clipping masks and layer masks to control where it appears.
- Keep layers separate for revisions, and export the texture as its own element if the piece will move on to After Effects or other motion tools.
Once you have this routine down, applying a texture takes a minute, and you can tailor it to suit each piece.