How to Put an Outline on Text in Procreate
StyleFrame Team9 min read
Outlining text in Procreate means building the outline from a copy of the lettering. Rasterize the text layer, duplicate it, fill the bottom copy with your outline color, and blur it with Gaussian Blur. Then use Automatic selection on the blurred layer to drag out a hard-edged selection around the letters, fill that selection on a new layer, and move the layer beneath the original text.
Why Outlining Text Takes a Few Extra Steps
This method has you working with pixels, not live type.
That has two consequences:
- The text must be rasterized. Once rasterized, you can no longer edit the wording or change the font. Keep an unrasterized copy hidden in your layer stack in case the client changes the copy.
- Outline quality depends on your canvas resolution. The outline is a raster shape, so a small canvas produces soft or stepped edges. Start large if the lettering is going into a video timeline.
If you come from After Effects, think of this as building a manual stroke by expanding a matte. You grow the shape of the letters, fill the grown shape, and put it behind the original.
What You Need Before You Start
- Procreate on an iPad. Apple Pencil is recommended, but the steps work with a finger.
- A canvas sized for your final delivery. For video work, match or exceed your comp resolution. A 3840 × 2160 px canvas is a sensible starting point for UHD.
- Lettering you are happy with, either typed with the text tool or drawn with a clean-edged brush such as a monoline brush. A crisp edge on the lettering gives you a crisp outline.
- A background color or a hidden background layer. A contrasting background makes it easier to see what the selection is doing.
Step-by-Step: Outline Text in Procreate
Step 1: Add and Rasterize the Text
- Tap the Actions (wrench) menu, then Add > Add Text.
- Type your words, choose a font, and set the size. Use a bold or heavy weight if you can, since thin strokes make outlines look fragile.
- Tap away from the text to finish editing.
- Open the Layers panel, tap the text layer, and choose Rasterize.
If you drew the lettering by hand, skip the rasterize step.
Step 2: Duplicate the Layer
Swipe left on the lettering layer and tap Duplicate. You now have two identical layers. The top one stays as your visible lettering, and the bottom one becomes the outline.
For safety, duplicate a third time and hide it. This gives you a clean backup in case a later step goes wrong.
Step 3: Fill the Bottom Layer with the Outline Color
- Choose the outline color. A darker or more saturated tone than the lettering fill usually reads best.
- Tap the bottom lettering layer and choose Alpha Lock.
- Tap the layer again and choose Fill Layer.
- Tap the layer once more and turn Alpha Lock off.
The bottom layer is now a solid-color silhouette of your letters.
Step 4: Blur the Silhouette
- Select the bottom layer.
- Open Adjustments (the magic wand icon) and choose Gaussian Blur.
- Set the mode to Layer.
- Slide your Pencil or finger across the canvas to increase the blur. A value of around 7 to 8 percent is a good starting point, though it depends on canvas size.
The blur spreads the silhouette outward into a soft halo. Do not overdo it. If the blur is so heavy that neighboring letters melt together, the next step will select the whole word as one blob, and your outline will lose its letter shapes.
Step 5: Select the Blurred Shape
- Tap the Selection tool (the S icon).
- At the bottom of the screen, choose Automatic.
- Tap on the blurred lettering, then drag your Pencil to the right. A selection outline appears, and its threshold grows as you drag.
- Stop when the selection edge sits at the outline thickness you want.
Watch the canvas as you drag. If the whole canvas turns blue, you have gone too far. Drag back to the left until only the lettering and its halo are selected.
Step 6: Fill the Selection
- Add a new layer above the blurred layer.
- Fill the selection with your outline color. Painting over the selection with a hard-edged brush such as the Hard Airbrush works well. The fill stays inside the selection edge, so you get a clean contour with no wobble.
- Turn off the Selection tool.
Step 7: Clean Up and Reorder
- Hide or delete the blurred layer. It was only a scaffold for the selection.
- Drag the new outline layer below the original lettering layer.
- Toggle layers on and off to check the result. You should see your original fill sitting inside a uniform, hard-edged outline.
Merge layers only when you are sure you do not need them separate, because separate layers are useful later in motion work.
Fixing Common Problems
The Automatic selection grabs the whole canvas or just a speck. This is a commonly reported issue. Check these in order:
- Confirm that the blurred layer is the active layer.
- Tap directly on the colored, blurred lettering, not on empty canvas.
- Reduce the blur amount and redo the selection. Too much or too little blur can produce unpredictable thresholds.
- Hide other layers with similar content or a busy background so they do not confuse your view of the selection.
Edges look jagged or bumpy. Increase the canvas size and redo the process. Rough source lettering produces rough outlines, so clean up the original strokes first.
Letters merge into one blob. Lower the blur, or increase letter spacing in the text tool before rasterizing. Tight kerning leaves little room for an outline.
The outline is too thin or too thick. Undo the selection and drag the threshold again. You do not need to redo the blur for this.
Corners look rounded. Because the outline is derived from a blurred shape, sharp corners soften slightly. For very sharp, geometric type, consider building the outline in a vector tool instead and bringing it back as a layer.
Alternative Ways to Get an Outline
- Draw it by hand. With StreamLine turned up on a monoline brush, you can trace around letters on a separate layer. It takes longer and is harder to keep consistent, but it gives you an organic look.
- Build it in a vector or compositing app. If your text is typed, not hand-drawn, outlining it in a vector or compositing app such as Illustrator, Affinity Designer, or After Effects may give you a more editable stroke. This method is best suited to lettering that is hand-drawn or textured.
- Double outlines. Repeat the process on the merged outline layer with a second color for a sticker or retro-badge look.
Exporting Outlined Lettering for After Effects
If you are building titles or lower thirds, the export settings matter as much as the outline.
- Use PSD for layered handoff. Procreate can export layered PSDs, so your lettering fill and outline arrive in After Effects as separate layers. This lets you animate each independently, for example a wipe on the outline followed by a fill reveal.
- Use PNG for flat assets. Turn off the background color layer before exporting a PNG so the alpha channel is preserved.
- Name your layers. Rename layers in Procreate before export, such as "Fill," "Outline," and "Texture," so the AE layer stack is readable.
- Check edge quality in your comp. Scale the layer to your final comp size and look for fringing. If you see a halo from the blur step, re-select with a slightly tighter threshold.
- Keep an unrasterized source. Save a version of the Procreate file with live text, so you can regenerate the artwork if the copy changes.
Once the layers are in After Effects, you can add motion with position, scale, and mask animation, or add effects like Roughen Edges or Turbulent Displace for a hand-made feel.
Taking Procreate Lettering Further with Styleframe
An outlined lettering piece from Procreate often works as a starting point for a larger motion sequence, not just a still. This is where can fit. It is an AI video and motion tool built around artistic control, not one-click output. Every generation is driven by your own references: images, video clips, and keyframes.
A few practical ways to use it with outlined lettering:
- Frames-to-Video. Export two or more lettering states from Procreate, such as a rough sketch pose and a finished outlined pose. Use them as keyframes, and Styleframe generates the motion between them, so you decide the start and end looks.
- Restyle and Ink-and-Paint. These are reference-driven style transfer tools. Use your outlined lettering as a style reference, or apply a hand-inked look from a reference frame to footage or 3D renders. Because the look comes from your reference, you stay in charge of the aesthetic.
- 2D-to-3D and Turntable. If the lettering is part of a logo or badge, 2D-to-3D can lift it into a 3D form, and Turntable can generate a rotating view for review or comp use.
- Remove Background and 4K Upscale. Remove Background can isolate lettering from a textured paper scan. 4K Upscale prepares assets for production-resolution delivery.
You keep your existing compositing workflow instead of replacing it.
Quick Checklist
- Rasterize the text, and keep a live-text backup.
- Duplicate the layer and fill the bottom copy with the outline color using Alpha Lock.
- Blur the bottom copy modestly, around 7 to 8 percent depending on canvas size.
- Use Automatic selection on the blurred layer and drag to set thickness.
- Fill the selection on a new layer and drag it under the original lettering.
- Delete the blur scaffold, then export PSD or transparent PNG at full resolution.
FAQ
Can I outline live text in Procreate without rasterizing? This method needs a raster layer. Text layers are rasterized before the outlining steps begin.
What blur percentage should I use? It varies with canvas size and letter weight. Start around 7 to 8 percent and adjust. Lower values suit tight lettering, and higher values suit bold, widely spaced letters.
Does this work for shapes and drawings, not just text? Yes. Any layer with a clear silhouette can be outlined this way, including logos, icons, and character art.
How do I get the outline into After Effects with transparency? Export a layered PSD or a PNG with the background layer hidden. Both preserve alpha, and PSD keeps the fill and outline separate for animation.