How to Print Procreate Drawings
StyleFrame Team7 min read
To print a Procreate drawing, set the canvas to 300 DPI at your final print size (plus bleed for commercial printing) before you draw, then export from Actions → Share as a PDF, PNG, or maximum-quality JPEG. Use a CMYK profile for professional printing, flatten a duplicate of the file for the printer, and order a proof before a full run. If the artwork was drawn too small, upscale it before printing rather than stretching it.
Start With the Right Canvas Settings
Print quality is mostly decided before the first stroke. Procreate's defaults suit screens, so check these when you create the canvas:
- Resolution: 300 DPI. Lower values like 72 DPI are meant for web display and will look soft on paper.
- Dimensions: the final trim size plus bleed. An 8" × 10" print with 0.125" bleed per side becomes an 8.25" × 10.25" canvas.
- Color profile: CMYK for commercial printing, or RGB if your printer asks for it. Procreate supports both.
Resizing a finished piece is where most print problems start. If you enlarge a raster drawing after the fact, Procreate has to invent pixels, and the result is soft edges and visible artifacts. Decide the largest size you might need and build the canvas for that.
Your iPad's memory limits the maximum canvas size, and a larger canvas means fewer layers. Plan for the balance between canvas size and layer count. High-resolution raster art is fine for professional printing, so you don't need to convert to vector.
Quick pixel math
Pixels needed = print inches × 300.
Check this against your canvas size before you commit to a drawing.
Understand Color: RGB vs CMYK
Screens emit light, and printers lay down ink. RGB colors can look brighter on screen and can shift when converted to CMYK, and prints may look slightly darker than the screen.
For motion designers this is familiar territory. It's the same gap you manage between a wide-gamut compositing space and a broadcast-safe delivery. A few habits help:
- Draw in CMYK from the start if the piece is destined for print, so you see the shifts as you work.
- If you draw in RGB, convert in Photoshop or your printer's workflow and check the result before sending.
- Never show a client the RGB version as the "expected" print. They'll want the print to match the vibrancy of the screen.
Prepare the File: Layers, Flattening, Bleed
Procreate layers are useful while drawing, but commercial printers typically want flattened files.
- Duplicate the artwork in the Gallery so you keep a layered master.
- Check at 100% zoom for pixelation, blurry edges, and soft linework.
- Add bleed of about 0.125" (3 mm) on all sides so ink runs edge to edge after trimming.
- Keep key elements inside the safe area, roughly 0.25" inside the trim line.
- Flatten the duplicate only when you're ready to export.
- Name the file clearly, for example
Artwork_8x10_300dpi_CMYK.pdf, so you can match it to the right order later.
Export From Procreate
You can share from the Gallery or from inside the canvas.
From the Gallery:
- Swipe left on the canvas and tap Share.
- Choose a format and wait for the export to finish.
- Tap Save Image to send it to Photos, or Save to Files to choose a location.
From inside the artwork:
- Open Actions and go to the Share tab.
- Pick a format and wait for the export.
- Choose Save Image or Save to Files.
If you pick PDF or the native Procreate format, or if the resolution is very high, the Save Image option won't appear. Use Save to Files instead. If you share several artworks as one PDF, each one becomes its own page.
Which format should you choose?
- PDF: the usual first choice for professional printers.
- TIFF: very high quality, but the files are large.
- PNG: lossless, which makes it a good choice for canvas prints and simple artwork.
- JPEG: acceptable only at maximum quality. Avoid re-saving it repeatedly.
If your printer has its own specification sheet, follow that over any general advice here.
Choose How You'll Print
Print at home
For small prints, save the file to Photos or Files and print from the share sheet to a compatible printer. Use good paper, select the correct paper type in the print dialog, and print a small test first. Home inkjets vary widely, so expect to adjust.
Use a print shop or online service
For art prints, posters, and client work, upload the flattened PDF or TIFF with bleed. Ask the service for their color profile and specifications. Some providers offer a downloadable profile you can load in Photoshop to soft-proof how the print will look, which lets you adjust color balance before you pay for the real thing.
Canvas and fine art prints
Archival canvas and pigment inks suit painterly work. Export as PNG to avoid compression loss, soft-proof if a profile is available, and make sure the file is large enough for the final dimensions. Large canvas prints are where undersized drawings show up most.
Screen printing
Screen printing is a different process: you separate the artwork into ink layers (for example cyan, magenta, yellow, and black), create registration marks, output positives, and expose screens. Tools like ColorLab for Procreate exist to help set up the separations. If you don't want to pull the screens yourself, you can prepare the separated art and hand it to a screen printer.
Always Order a Proof
Your monitor is not a reliable judge of printed color. A digital or physical proof catches color shifts, trim problems, and resolution issues before the full production run. This matters most for limited editions, client work, and anything that went through an RGB-to-CMYK conversion.
Common Mistakes to Avoid
- Drawing at 72 DPI or a low default resolution
- Enlarging the artwork after it's finished
- Forgetting bleed
- Exporting low-quality JPEGs
- Sending RGB files when the printer expects CMYK
- Skipping the proof on color-critical jobs
- Flattening your only copy
When Your Drawing Is Too Small
Motion pros often end up printing stills from a pipeline rather than a single drawing: a Procreate sketch, a key frame from an After Effects comp, a styleframe for a pitch deck, or a poster pulled from an animation. A few pipeline-specific points help.
Check your pixel count against the print size. A 4K UHD frame is 3840 × 2160 pixels, which gives you roughly 12.8" × 7.2" at 300 DPI. That's fine for a pitch print or a small poster, but it won't cover an 18" × 24" print without enlargement.
Upscale deliberately. Basic resampling in Photoshop or After Effects can leave soft detail on large prints. If you need more pixels, a dedicated upscaling pass gives you a cleaner starting point. For very large formats, you'll want to confirm the pixel dimensions against your printer's requirements and soft-proof the result.
A Quick Pre-Print Checklist
- Canvas at 300 DPI and final size plus bleed
- Color profile matches the printer (CMYK or RGB as specified)
- Layered master saved; flattened duplicate for output
- Artwork inspected at 100% zoom
- Exported as PDF, TIFF, PNG, or maximum-quality JPEG
- File named clearly with size, DPI, and color mode
- Proof ordered and reviewed
- Final print run approved
FAQ
What DPI should I use for Procreate prints? 300 DPI at the final print size is the standard for professional printing.
Can Procreate handle large print sizes? Usually, yes. Your iPad's memory sets the limit, and larger canvases reduce the number of layers you can use. Plan the size at the start.
Why can't I save my PDF to Photos? Photos doesn't accept PDF or Procreate-format files, and very high-resolution exports may also be blocked. Use Save to Files.
Do I need vector art for professional printing? No. A high-resolution raster file at the right size and DPI prints well.
Should I send my printer RGB or CMYK? Send what they specify. If they don't specify, CMYK is the safer choice for ink-based printing, and a proof will confirm the result.