How to Print Procreate Artwork Without Getting Pixels
StyleFrame Team7 min read
To print Procreate artwork without visible pixels, make sure the canvas has enough pixels for the size you will print. At 300 PPI (the "DPI" setting in Procreate), that means about 300 pixels per inch of the final print, so an 8×10 in print needs a canvas of at least 2400×3000 px. Typing "300 DPI" into a small canvas doesn't add pixels, and export settings can only preserve the detail the canvas already has. Set the canvas size from the final print size before you start drawing, and avoid enlarging or heavily transforming layers later.
Why Procreate prints look pixelated
Procreate is a raster app. The moment you create a canvas, its pixel dimensions are fixed. A printer spreads those pixels across paper, so the sharpness of the print depends on how many pixels land in each inch.
The confusion comes from the canvas setup screen. You can enter a physical size (inches, cm, mm) plus a DPI value, and Procreate calculates the pixel dimensions for you. That makes it easy to assume the canvas size and the print size are the same thing. They aren't. If you drew on a 5×7 in canvas and later send it to print at 11×14 in, the file still holds the same pixels, now stretched over more than four times the area. The result is soft edges, stair-stepped diagonals, and fuzzy linework.
Motion designers know this problem from video. Upscaling a 1080p frame to a 4K timeline doesn't create detail, and a low-resolution canvas doesn't gain any by being labeled 300 DPI. Pixel dimensions are the real resolution. DPI or PPI is metadata that tells a printer how large to render those pixels.
The formula that matters
Use this relationship whenever you set up a print piece:
Required pixels = print size in inches × target PPI
For work viewed up close, such as art prints, cards, and invitations, 300 PPI is the standard starting point. Some common sizes at 300 PPI:
One cautionary example from the Procreate community: a 5×7 in canvas at 132 DPI came out to only 660×924 px, which is why the invitations printed blurry. Re-creating it at 5×7 in and 300 DPI (about 1500×2100 px), or building it in pixels at that ratio or larger, fixes the root cause.
Larger print formats like posters and banners are often viewed from farther away, so a lower PPI can be acceptable. Ask your print shop for their minimum rather than guessing. If a printer requests a specific number, such as 600, confirm whether they mean pixels per inch at final size or something else before building the file.
How to set up your canvas correctly
- Decide the final print size first. Ask the printer for trim size, bleed (often a fraction of an inch on each side), file type, and color mode before you draw anything.
- Create the canvas in physical units or pixels. In Procreate, tap the plus icon, then New Canvas, and enter the dimensions. Include bleed in the size if the printer requires it.
- Set 300 DPI, then verify the resulting pixel dimensions match the table above or your own calculation.
- Check the numbers. Go to Actions > Canvas > Canvas Information > Dimensions. If the pixel width and height are lower than your target, you need a bigger canvas.
- Balance size against layers. Larger canvases reduce the number of layers Procreate allows. If you need many layers, plan the artwork so you can merge or split it, or make the canvas the largest size your device handles while keeping the same aspect ratio.
If you aren't sure how the piece will be used, build bigger than you think you need. You can always scale a large file down cleanly. You can't scale a small one up without losing quality.
Check the effective resolution of existing artwork
For a finished piece, divide the pixel width by the print width in inches. A 2000 px wide canvas printed at 8 in wide gives you 250 PPI, which is probably fine. The same canvas at 20 in wide gives 100 PPI, which will look soft up close.
Open Canvas Information to read your pixel dimensions, then compare them to the print size you want. If the numbers fall short, you have three options:
- Print smaller. This is the simplest fix and often acceptable for prints that sit on a desk or a shelf.
- Enlarge with resampling or an AI upscaler. This can reduce visible blockiness, but it estimates detail rather than recovering it, so check the result at full size before ordering a run.
- Redraw or rebuild at the correct size. For line art, lettering, and logos, this is often the cleanest route. Vector tools can also recreate simple shapes with no resolution limit.
Export settings: what helps and what doesn't
Export settings can't add quality. They can only keep it or throw it away.
- PNG is lossless and works well for flat art, line work, and transparency.
- TIFF is also lossless.
- PDF is useful when a printer wants a single document, and Procreate lets you choose quality when exporting. Check the physical size after exporting. A pasted-in image can end up at the wrong scale if its pixel dimensions don't match your assumptions (one user's pasted-in 5×5 in design printed at 2×2 in).
- JPEG uses lossy compression. If you must use it, choose the highest quality setting and avoid re-saving it repeatedly.
If you export from Procreate and then bring the file into another layout program, check the placed image's effective PPI there. Fuzzy lines are often the result of shrinking a file with poor resampling, or of the layout app scaling the image unexpectedly. When you can, place images at 100% of their intended size and avoid stacking multiple rescales.
For direct printing from your iPad, exporting to the Files app first and printing from there can give you more control over paper handling and scaling than printing straight from the share sheet.
Avoid quality loss while you work
Even with a correct canvas, certain habits soften the artwork before it reaches the printer:
- Scaling layers up forces Procreate to interpolate pixels. Scaling down is safer, but repeated transformations compound the softening.
- Rotating raster layers resamples them. Where possible, rotate once, and draw straight lines and lettering at their intended angle.
- Pasting low-resolution images into a high-resolution canvas doesn't improve them. The pasted image is only as sharp as its own pixels.
- Judging sharpness at extreme zoom. Every raster app shows pixels if you zoom in far enough. Check at 100% zoom, where one canvas pixel equals one screen pixel, to see what the file really looks like.
Color mode: the other reason prints disappoint
Sharpness and color are separate problems, but they often get blamed on the same thing. Screens use RGB, and many printers use CMYK, so colors can shift in print. Ask your printer which color profile they want before you finish the piece. Many print-on-demand services accept RGB, while some commercial and textile printers prefer CMYK. Soft-proof if your workflow allows it, and order a test print before a full run.
A practical angle for motion and VFX artists
If you work in After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke, Procreate may be where you paint boards, textures, or style frames, and print is where you present them for approval, make posters, or produce festival materials. The same pixel math applies to anything you render.
- A 3840×2160 frame printed at 12 in wide is about 320 PPI, which is plenty. The same frame at 36 in wide drops to about 107 PPI.
- Render stills at the resolution the print needs rather than upscaling a screen-sized frame afterward.
- If you paint overs or textures in Procreate and bring them into a composite, make the canvas large enough for the biggest crop or zoom you will need, not just the timeline resolution.
Quick checklist before you send files to print
- Final print size and bleed confirmed with the printer
- Canvas pixel dimensions match print size × target PPI
- Canvas Information checked in Procreate
- No large upscaling of layers or pasted images
- Export format suits the printer (PNG, TIFF, or PDF)
- Placed file checked at 100% scale in the layout app
- Color mode confirmed and a proof ordered when color matters
Get the pixel count right at the start, and your prints will hold the detail you see on your iPad.