How to Print Procreate Art
StyleFrame Team8 min read
To print Procreate art, build the canvas at the final print size and 300 DPI, then export it from Actions → Share as a PNG, TIFF, or PDF. From there, print it on your own printer through AirPrint, or send the file to a print shop or print-on-demand service. Most disappointing prints come from a canvas that was too small or a color profile that didn't match the printer, so check both before you start painting.
Start with the print in mind
Print quality is mostly decided when you create the canvas. Procreate is a raster app, so it can't invent detail it never had. Before you open a new canvas, find out where the piece will be printed and what size it needs to be.
Gather these details first:
- Final print size (for example, 11×14 in or A3)
- Bleed or trim area, if a print shop requires it (the amount varies by shop, so ask)
- Preferred file type (PNG, TIFF, PDF, or JPEG)
- Color mode (RGB or CMYK)
If you don't know where it will be printed yet, work larger than you think you need. Scaling down is lossless in practice; scaling up is not.
Set up the canvas
In the Procreate Gallery, tap +, then the custom canvas icon. Three settings matter for print.
1. Dimensions
Switch the unit from pixels to inches and enter the physical size of the finished print. If you need bleed, add it to the dimensions now so you don't have to extend the art later.
2. Resolution
Set DPI to 300 for standard prints. Posters and large canvases viewed from a distance often look fine at lower effective resolution, so check with your printer.
3. Color profile
Procreate lets you choose between RGB and CMYK profiles. Which one you pick depends on how the piece will be printed:
- RGB is fine for most home printers, print-on-demand services, and giclée shops that accept RGB. It keeps the full vibrancy of the iPad display, and many modern digital print workflows convert it for you.
- CMYK is worth using when you want the on-screen colors to approximate what ink will actually produce, or when a commercial printer specifically requires CMYK. It narrows the gamut, so colors look duller while you work. That is the point: you see the shift before you've committed.
If you're printing to a service that supplies an ICC profile, ask whether they want RGB or CMYK files. Don't convert blindly. Converting twice (RGB → CMYK → RGB) degrades color and cannot be reversed cleanly.
You can save your dimensions, DPI, and profile as a named custom canvas in the New Canvas panel, so you don't rebuild the setup every time you start a print-bound piece.
What if you've already finished the artwork?
If the canvas is already built at the wrong size, open Actions → Canvas → Crop & Resize and change the canvas size or DPI. Be aware of the difference between changing DPI without resampling (which only changes the stated print size) and resizing with resampling (which changes the pixel count and can soften the image).
A practical rule: if the pixel dimensions divided by the print size in inches give you at least 300 pixels per inch, you're fine. If not, you'll either print smaller, accept some softness at a larger viewing distance, or upscale. For gallery-quality enlargements, a dedicated upscaling tool will serve you better than Procreate's own resampling.
Export the file
Procreate saves your work automatically, but that file lives inside the app. To print, you need to export a copy.
- Open your artwork and tap Actions (wrench icon).
- Choose the Share tab.
- Select a format and wait for the export to finish.
- Tap Save Image to send it to Photos, or Save to Files to store it anywhere in the Files app or a cloud service.
If you're in the Gallery instead, swipe left on the canvas and tap Share.
Which format should you choose?
Very high-resolution canvases, and PDFs, may not offer Save Image and will only let you Save to Files. That isn't an error; it's how Procreate handles large exports. If you select multiple canvases in the Gallery and share them as a PDF, each artwork becomes its own page in a single document, which is useful for portfolios or storyboard sets.
Print from your iPad
For a quick print at home:
- Export as PDF or PNG and save it to Files or Photos.
- Open the file and tap the Share icon, then Print.
- Choose an AirPrint-compatible printer, set paper size and number of copies, and adjust scaling.
- Choose "Fit to page" only if your proportions match the paper. Otherwise you'll get white margins or cropping.
Set the paper type in the printer dialog to match what you've loaded (matte, photo gloss, and so on). The wrong paper setting is a common cause of muddy blacks and banding. If your printer doesn't support AirPrint, send the file to a Mac or PC and print from there with the manufacturer's driver, which usually gives you more control over color management.
Print through a shop or print-on-demand service
For anything you plan to sell, frame, or hand to a client, a professional printer will usually beat a desktop inkjet. A few practical points:
- Download their specs and color profile. Many labs publish an ICC profile you can load in Photoshop for soft-proofing, which shows you how the print will shift before you pay for it.
- Check for bleed and safe margins. Keep important details away from the edges.
- Match the file type they ask for. If they say PNG, send PNG, not JPEG.
- Order a small test print first. Colors on an iPad's display rarely survive printing unchanged, particularly saturated colors.
- Pick the paper deliberately. Matte, luster, cotton rag, and canvas all handle contrast and ink density differently. Dark, heavily saturated art can look flat on uncoated stock.
If you need to adjust color after soft-proofing, you can do it in Procreate or in Photoshop with the vendor's profile loaded. Either way, keep your original untouched and make the print version a duplicate.
Common problems and fixes
The print looks blurry. The canvas was too small for the print size. Check pixels per inch, and upscale or reduce the print size.
Colors look dull or shifted. You're seeing the RGB-to-ink gamut difference. Soft-proof, use the printer's profile, or work in CMYK from the start next time.
Blacks look gray or brown. Often a paper-type setting or a mismatched profile. Try the correct paper type and, for text-heavy work, check whether the black is pure K.
Edges get cut off. There was no bleed, or "Fit to page" changed the scaling. Add bleed on the canvas and print at 100% scale.
The export won't save to Photos. The file is a PDF or its pixel resolution is too high. Use Save to Files.
For motion and VFX artists: printing in a larger pipeline
Many artists who use Procreate also work in After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke, and prints often serve a pipeline role: boards for client review, physical styleframes for a pitch, or portfolio leave-behinds. A few workflow notes help here:
- Export a layered PSD for animation work in After Effects, and a flattened PNG/TIFF for the print version. Keep them as separate files.
- Use Procreate's Share tab inside the canvas when you need each animation frame as its own image in a sequence.
- Print at the exact aspect ratio of your frame (16:9, 2.39:1, and so on) so boards don't get letterboxed by the printer.
If a styleframe starts life as a Procreate illustration and then needs to move, can sit alongside your existing tools. For very large print formats, you should still start from a large canvas or use a dedicated print-oriented upscaler. Styleframe is for the motion side of the workflow; the print-prep steps above still apply to your stills.
A quick checklist before you hit print
- Canvas matches the physical print size (plus bleed if required)
- Resolution is 300 DPI, or an agreed lower value for large formats
- Color profile matches the printer's requirement
- Exported as PNG, TIFF, or PDF, not a compressed JPEG, for final prints
- Printer or lab specs and ICC profile reviewed
- A small test print approved before the full run
Get the canvas, profile, and export format right, and printing Procreate art stops being a gamble. Everything else is paper choice and a test print.