How to Print Designs from Procreate
StyleFrame Team7 min read
To print designs from Procreate, build the canvas at the final print size at 300 DPI, use the color mode your printer asks for (CMYK or RGB), and add bleed if the job is going to a print shop. Then open Actions → Share, export a flattened file (PDF is the usual choice, with TIFF or maximum-quality JPEG as alternatives), and send it to your printer or print it yourself. Duplicate the layered file before flattening, and order a proof for any color-critical job.
Most print problems come from decisions made when the canvas was created, not at export. The steps below cover setup, export, and a few things specific to people who move artwork between Procreate and motion tools.
Start With the Right Canvas Settings
In the Procreate Gallery, tap +, then the custom canvas icon. Three settings matter for print: dimensions, resolution, and color profile.
Dimensions
Create the canvas at the physical size of the finished print. Enlarging a raster image later softens it and introduces pixelation, while reducing it is safe. If you're unsure of the final size, build bigger.
If the printer requires bleed, add it to the canvas. Standard bleed is 0.125" on every side, so an 8" × 10" print becomes 8.25" × 10.25". Keep important elements, especially text, at least 0.25" inside the trim line so nothing gets cut off.
Resolution
Set the canvas to 300 DPI. Designing at 72 DPI or 132 DPI is one of the most common causes of soft, blurry prints. Remember that DPI and pixel dimensions work together: a 300 DPI canvas that is physically small still won't hold up when blown up.
Color profile
Procreate supports both RGB and CMYK. Which one you need depends on who prints the work:
- Commercial and industrial printers often ask for CMYK.
- Print-on-demand services frequently work in RGB.
Ask the printer before you start. RGB colors often look brighter on screen and can shift when converted to CMYK, so choosing correctly at the start saves you from converting layer by layer later. If you can't find out, RGB is a reasonable default for print-on-demand, and CMYK for fabric or apparel printers.
You can change the profile of an existing canvas, but expect to review the colors afterward.
Prepare the Artwork Before Exporting
Keep layers while you work, flatten at the end
Keep text, background, and artwork on separate layers while you design. Most print shops want a flattened file, so duplicate the canvas first, flatten the copy, and keep the original as your editable master.
Inspect at 100%
Zoom to 100% and look for pixelation, ragged edges, and soft text. If something looks wrong at actual size, it will look worse on paper.
Name files clearly
A name like Artwork_8x10_300dpi_CMYK.pdf tells you and your printer exactly what the file is. It also helps when you come back months later and need to reprint.
How to Export From Procreate
There are several ways to get a file out. All of them use the same Share menu.
Export from the Gallery
- Swipe left on the canvas and tap Share.
- Choose a format and wait for the export to finish.
- Tap Save Image to send it to Photos, or Save to Files to store it anywhere in the Files app, including cloud storage.
A few format quirks to know about: PDF and .procreate files can't be saved to Photos, and neither can artwork whose pixel resolution is too high. In those cases, use Save to Files.
Export from inside the canvas
Open Actions → Share, pick the format, and save. This is the quickest option while you're still working, and it's also the one to use for animations when you need each frame as its own file in a sequence.
Export several designs at once
Tap Select in the Gallery, choose multiple canvases or Stacks, tap Share, and pick a format. If you export multiple artworks as a PDF, each one becomes a separate page in a single PDF. That's handy for sending a set of designs to a printer or assembling a simple proof booklet.
Choose the Right File Format
When a printer gives you a spec sheet, follow it over any general rule. Every printer, ink set, and product has different requirements, and no single file works perfectly for all of them.
Print It
You have two practical routes:
- Send the file to a print shop or print-on-demand service. Upload the flattened PDF or TIFF, matching their stated size, bleed, and color mode.
- Print it yourself. Save the file to Files, or move it to a computer and print with your printer's own software, where you have more control over paper type and color management.
Always Proof Before a Full Run
Your monitor is not a reliable judge of printed color. A digital or physical proof will reveal color shifts, trim problems, and resolution issues before you commit to a full run. This matters most for limited editions, client work, and any file that went through an RGB-to-CMYK conversion.
Common Mistakes to Avoid
- Setting the canvas to 72 or 132 DPI
- Resizing the artwork after finishing it
- Forgetting bleed
- Exporting low-quality JPEGs
- Sending RGB to a printer that expects CMYK without asking
- Skipping the proof on color-sensitive projects
- Flattening your only copy
If Your Procreate Work Also Lives in a Motion Pipeline
Many motion designers sketch styleframes, boards, or character designs in Procreate, then rebuild or animate them in After Effects, Cinema 4D, or Blender. Print is often a side deliverable: a pitch deck, a poster for a title sequence, a client leave-behind. A few habits keep both outputs clean.
Keep one high-resolution master. Build the Procreate canvas at the largest size you'll need. A design made for print at 300 DPI will generally have more than enough pixels for a 4K or HD comp. The reverse is rarely true. A canvas made at video resolution won't scale up cleanly to a poster.
Separate your color needs. Video work is generally RGB, while print might be CMYK. Keep the RGB master untouched and make the CMYK conversion on a duplicate so you never lose the original colors for compositing.
Export layers deliberately. For animation, use the in-canvas Share menu to export frames as individual files in a sequence. For compositing, export transparent PNGs of the elements you want to move independently in After Effects or Nuke.
A practical caveat for print: 4K is 3840 × 2160 pixels, which at 300 DPI covers roughly 12.8" × 7.2". That's plenty for a pitch deck page or a small print, but for large posters, the original Procreate master at its native print size remains the better source. Keep the Procreate file as the print master.
Quick Checklist
- Ask the printer for size, bleed, color mode, and file type.
- Create the canvas at final size plus bleed, at 300 DPI, in the requested color profile.
- Keep important elements 0.25" inside the trim.
- Duplicate the canvas, then flatten the duplicate.
- Inspect at 100% zoom.
- Export via Share, using Save to Files for PDFs and large files.
- Name the file clearly.
- Order a proof before the full run.
FAQ
What DPI should I use to print from Procreate? 300 DPI is the standard for professional-quality prints. Lower values like 72 produce visibly soft results.
Should I use RGB or CMYK? Use whatever your printer specifies. CMYK is common for industrial printing, and RGB is increasingly common for print-on-demand. If the printer doesn't specify, ask.
Why do my prints look different from my iPad? Screens emit light, while printers lay down ink, and each printer and paper combination behaves differently. A proof is the most reliable way to see the difference before committing.
Can I print an animation from Procreate? You can export individual frames as separate files from the in-canvas Share menu and print them as stills. For motion deliverables, export the sequence and finish it in your compositing app.