How to Print Big Tattoo in Sections on Procreate
StyleFrame Team6 min read
Procreate can't print a design across several sheets on its own, because the iPad print preview only centers the image on a single page. The reliable workaround is to set the canvas to the tattoo's true size, export it as a PDF or PNG, and split it into page-sized tiles, either by cutting the design into paper-sized pieces in Procreate or by using a layout app such as Affinity Designer to place the artwork on paper-sized artboards. Print the tiles at 100% scale, trim them, and tape them together along overlap marks.
Why Procreate won't print in sections
Procreate hands printing to iPadOS (AirPrint). The system print preview won't let you reposition, rotate, or scale the artwork to choose which part of it prints. An 11 × 24 inch sleeve design sent to a letter-size printer gets centered and cropped, and you can't say "print the top third."
Desktop layout tools have handled this for decades with tiling, which is why most workarounds move the file out of Procreate for the last step. You have two options: cut the design into tiles inside Procreate, or let a layout app do it. Both work, and the right choice depends on how many tiles you need and how precise the alignment must be.
Step 1: Set up the canvas at the right size
Before tiling, decide how big the final stencil is on the body. Measure the placement (forearm, thigh, back) and write down the width and height in inches or centimeters.
Large canvases cost layers. Procreate stores each layer as a full-resolution bitmap, so a canvas the size of a back piece at 300 DPI leaves very few layers. Two ways to handle it:
- Work small, scale at export. Draw on an A3-size or smaller canvas at 300 DPI, then scale to the final dimensions when you export or tile. Line art holds up well when enlarged moderately.
- Lower the DPI. A stencil is mostly clean linework, so 150 to 200 DPI at full size is often enough, and it keeps your layer count workable.
If the design is mostly vector-like linework and you'll enlarge it a lot, redraw or trace the final linework in a vector app so it stays crisp at any size.
Step 2: Prepare the artwork as a stencil
Tiling is easier when the file is already clean:
- Put the final outlines on their own layer and hide everything else: color, shading, background, reference photos.
- Use solid black lines on a white or transparent background. Stencil transfers generally want high contrast.
- Check whether the design needs mirroring. Many transfer methods flip the image, so use Transform and flip horizontally if yours does.
- Add a scale reference, such as a 1-inch or 10 cm bar in a corner, on a separate layer you can toggle. After printing, you can measure it to confirm no scaling crept in.
Some artists use a Color Dodge or invert-and-curves workflow to turn a sketch into a clean line-only layer. That's useful if your linework is pencil-textured, but the aim is simply a crisp black-on-white result.
Method A: Tile inside Procreate
This method needs no other apps. It's most practical for designs that split into a small number of sheets.
- Calculate your tile size. Subtract your printer's non-printable margin from the paper size. Margins vary by printer, so check yours. As an example, a 0.25 inch margin per side on letter paper gives roughly 8 × 10.5 inches of printable area.
- Plan the overlap. Add about 0.5 inch of overlap on shared edges so tiles can be aligned and taped without gaps. A tile's step distance is its printable size minus the overlap.
- Mark the tile boundaries. Use a grid or guides in Procreate sized to your tile steps so you can see where each cut falls.
- Duplicate the artwork for each tile. Duplicate the full canvas once per tile.
- Isolate each tile. Cut or crop each copy down to its region at the exact tile dimensions, and don't resample, so the pixel scale stays identical across all tiles. Pasting each piece into a canvas sized to your paper also works.
- Label and export. Add a small tile ID (A1, A2, B1…) outside the stencil area or in the overlap zone, then export each as a PNG or PDF.
- Print at 100%. Choose the matching paper size and turn off any "fit to page" option.
A worked example
An 11 × 24 inch sleeve on letter paper in portrait orientation, with 0.25-inch margins and 0.5-inch overlap:
- Printable area per page: 8 × 10.5 inches.
- Width: two columns cover 11 inches comfortably.
- Height: with a 10-inch step, three rows cover about 30 inches, more than the 24 you need.
- Result: a 2 × 3 grid, six sheets.
Rotating to landscape gives the same six-tile result, so pick whichever orientation leaves the cleanest cut lines through the less detailed parts of the design.
Method B: Tile in a layout app
If you'd rather not crop each piece inside Procreate, export the full-size file and let a layout app handle the page-sized sections.
Affinity Designer. Create artboards that match your printable paper size, place the artwork at 100%, and align each section by hand. It's more manual, but in theory it sidesteps printer-related size issues, because what you print is the same size as what the printer wants to print. Exporting each artboard separately avoids system scaling.
Step 3: Print, trim, and assemble
- Disable scaling. Always select "Actual size" or "100%." A "fit to page" default is the most common cause of mismatched tiles.
- Print one tile first. Check the scale bar with a ruler before running the rest.
- Trim consistently. Cut along one side of each overlap, then lap the trimmed edge over the next tile's printed linework and match the lines by eye.
- Tape from the back. Use clear tape on the reverse so the stencil face stays clean.
- Add registration marks. Small crosses or corner ticks in the overlap zones make alignment much faster, especially with long lines that run across several sheets.
Common problems and fixes
Lines don't match across tiles. Usually this is caused by a scaling option left on or a crop that was resampled. Re-export with identical pixel dimensions and print at 100%.
Blurry output. The canvas was too small for the final size. Raise the export resolution, re-trace the linework, or work at a higher DPI, then check the layer count.
Lines cut off at page edges. You're printing into the non-printable margin. Reduce the tile size by the margin width and add more overlap.
The printer centers the page anyway. Export each tile at the exact paper size rather than a smaller image on a larger page, so there's nothing to reposition.
Quick checklist
- Measure the real body placement before creating the canvas.
- Work at a manageable canvas size and scale at export, or lower DPI for large pieces.
- Isolate line art, set it black on white, and flip it if your transfer method requires it.
- Calculate printable area, overlap, and tile count first.
- Tile inside Procreate by cutting the design into paper-sized pieces, or use a layout app such as Affinity Designer.
- Print at 100%, check the scale bar, then trim and tape.
With this approach, an oversized design that Procreate won't print directly becomes a handful of sheets that line up into a single accurate stencil.