How to Print Actual Size from Procreate
StyleFrame Team8 min read
To print actual size from Procreate, build the canvas at the physical size you want (for example 5 × 5 inches) at 300 DPI, which gives 1500 × 1500 pixels. Export it as a PDF, or as a PNG or JPEG, from Share. Then print with scaling turned off ("Actual size," "100%," or "Scale: None") rather than "Fit to page." If a print comes out too small or too large, the cause is almost always a pixel count that doesn't match inches × DPI, or a print dialog that is rescaling the file.
The math behind actual-size printing
Procreate is a raster app, so a canvas is a fixed grid of pixels. DPI is only a label that tells other software how densely to pack those pixels on paper. Physical size is:
pixels ÷ DPI = inches
A 1500 px canvas at 300 DPI prints at 5 inches. The same 1500 px at 150 DPI prints at 10 inches, and at 600 DPI it prints at 2.5 inches. If you already work in comps and frame sizes, this is the same logic as a 1920 × 1080 frame: the pixel dimensions are the real data, and everything else is metadata.
Quick reference for 300 DPI:
Set up the canvas correctly
Starting with the right canvas avoids most problems.
- In the Gallery, tap + and choose the Custom canvas icon.
- Switch the unit to inches, mm, or cm using the control next to the number pad.
- Enter the width and height of the final print.
- Set DPI to 300 for most prints.
- Check the pixel dimensions Procreate shows against your own math.
- Name the canvas (for example, "5x5in 300dpi") and tap Create. It's saved as a reusable template.
Keep in mind that Procreate limits the number of layers according to canvas size and your iPad's memory. A large, high-DPI canvas means fewer layers, so for big prints plan your layer budget before you start painting.
If the artwork will be viewed at arm's length, like a poster, you can often drop below 300 DPI. For anything handheld or inspected closely, stay at 300.
Check an existing canvas
If you already have a file, don't guess. Open the Actions menu (wrench), go to Canvas, and tap Canvas information. It shows the dimensions in your chosen unit, the DPI, and the pixel size. If 5 × 5 in at 300 DPI doesn't show 1500 × 1500 px, fix that before exporting.
To change the size, use Canvas > Crop & Resize > Settings:
- Resample canvas on changes the pixel count. Making it smaller throws away detail, and making it larger interpolates new pixels without adding real detail.
- Resample canvas off changes only the DPI and physical size labels. Pixel dimensions stay the same, so this is the right option when you simply need to relabel a file for a different print size.
Mixing these up can cause "it prints tiny" problems.
Export for printing: PDF or image file
- Go to Actions > Share > PDF and choose the highest quality option available.
- A PDF carries a page size derived from the canvas dimensions and DPI, so a correctly set up 5 × 5 in canvas should open as a 5 × 5 in page.
- PDFs are the safest choice for print shops and for printing from the Files app.
PNG, JPEG, or TIFF
- PNG is lossless and works well for flat art and transparency.
- JPEG is smaller, but compression can add artifacts to fine gradients.
- Embedded DPI is read differently by different apps. Some honor it and some apply their own default size.
If you print an image file directly from Photos or a generic print dialog, the layout engine may stretch it to fit the paper. This is a common cause of the "wrong size" result.
Print settings that quietly resize your art
Even a perfect file can come out wrong at the last step. Check these in the print dialog or printer driver:
- Scale to fit / Fit to page / Fill page: turn these off.
- Actual size / 100% / Scale: None: turn this on.
- Borderless printing: some printers may enlarge the image slightly to avoid white edges, which changes the size by a small amount.
- Paper size mismatch: if the document is 8.5 × 11 in and the printer is set to A4, the driver may rescale.
- Preview before printing: if the preview shows the art filling the whole page when it shouldn't, something is scaling it.
An approach that may avoid some iPadOS print-sheet limitations is to export the PDF to the Files app and print from there, or move it to a desktop and print from Acrobat or Preview with scaling set to 100%. Direct printing from within an app often exposes fewer paper and layout options.
After printing, confirm with a ruler. Measure a known dimension on the printed piece, such as the full width of a 5 in square, and compare it to the intended size. If it's off by a consistent percentage, the driver is scaling. If it's off by a large factor, such as printing at 2 × 2 instead of 5 × 5, look at pixel dimensions.
Why a pasted image prints too small
A common scenario: someone creates a 5 × 5 in, 300 DPI canvas, pastes in an image, exports a PDF, and gets a print at 2 × 2 in. Meanwhile, a canvas painted entirely in Procreate prints at the right size from the same printer. That points to the file rather than the printer.
Typical causes:
- The pasted layer isn't the pixel size you assumed. Paste adds pixels at the source's own dimensions, and the canvas stays as it was. If you then copy the layer into a new canvas from the clipboard, Procreate builds a canvas based on that layer's pixels, which can give odd results like 5.82 in at 264 DPI.
- The export doesn't match the canvas. Always verify pixel dimensions through Canvas information on the final file.
- Metadata DPI differs from what you expect. Some apps ignore Procreate's DPI value and recompute size from their own default.
The fix is to decide on the target pixel dimensions first (1500 × 1500 for 5 in at 300 DPI), then make the canvas that size with Resample on, and scale the imported layer to fill it using Transform. If the source image has fewer pixels than the target, it will look soft at print size, and no setting will fix that.
Seeing print size while you paint
Procreate doesn't have a true 100% physical zoom that matches printed inches on your iPad display. Artists have asked for a "zoom to print size" option because stroke weights look different on a screen than on paper. Workarounds:
- Make a test print of a small section early on, so you know how fine lines and textures will look on paper.
- Place a reference layer of known size, such as a drawn 5 in square, and compare it against a physical ruler held to the screen. This is imprecise, but it helps with stroke judgment.
- Check sections at 100% zoom rather than judging the whole canvas fit to screen.
Color mode and bleed
- RGB vs CMYK: you can print an RGB file. Colors may shift because ink can't reproduce every screen color. Working in a CMYK profile from the start gives a closer preview but a narrower palette. If you'll also use the art on screen, keep RGB and soft-proof in another app before sending to a print shop.
- Bleed: if the art goes to the paper edge and will be trimmed, add roughly 3 mm (about 0.125 in) per side to the canvas. A 5 × 5 in final trim becomes about 5.25 × 5.25 in at 300 DPI, or roughly 1575 × 1575 px. Confirm the required bleed with your printer.
- Print shop specs: ask for their preferred format, color profile, and DPI. They often differ by service.
Taking Procreate art into a motion pipeline
If you're a motion designer or compositor, a Procreate piece may also be a source for animation. The same pixel discipline applies in After Effects, where the comp's pixel dimensions drive output and image DPI matters mainly when you hand a still to print. A common route is:
- Export a layered PSD or flat PNG from Procreate at the pixel size you need.
- Bring it into After Effects, Nuke, or Blender for compositing or animation.
- For a print still from the final comp, render a TIFF or PNG, then set the physical size in Photoshop with Resample off so the pixel data stays untouched.
For still prints, if a source image is a bit short on pixels, a 3840 px width gives about 12.8 in at 300 DPI. Upscaling can't recover detail that was never drawn, so compare a test print against your original before committing to a large run.
Quick checklist
- Calculate pixels = inches × DPI before you start.
- Create the canvas in physical units at 300 DPI.
- Confirm with Canvas information.
- Use Resample deliberately when resizing.
- Export a high-quality PDF, or a lossless image.
- Print at 100% / Actual size, with fit-to-page and borderless options off.
- Measure the print with a ruler.
- Account for color shifts and bleed if sending to a print shop.
FAQ
Does DPI matter if the pixel count is right? The pixel count sets how much detail you have, and DPI sets how big the print comes out. Both must match your intended size.
Why does my PDF look right on screen but print small? Check the printer dialog for scaling, and confirm the PDF's page size in a viewer. Print from Files or a desktop PDF app if the iPad dialog offers too few options.
Can I print a larger size than I painted? Yes, but each pixel gets stretched, so the DPI drops. Check a test print before committing.