How to Posterize in Procreate
StyleFrame Team9 min read
Procreate has no one-tap Posterize filter, so you build the effect yourself. The most reliable way is to desaturate the image and map its tones to a few flat colors with Adjustments > Gradient Map, or with a stepped Curves adjustment. When you need exact control over each color region, use Automatic Selection to fill flat shapes on separate layers. Both approaches reduce a continuous-tone image to a small number of flat color bands.
What Posterize Means in Procreate
Posterization collapses a smooth tonal range into a handful of distinct levels. A photo with hundreds of tones becomes three, four, or six flat areas, and the gradients turn into hard-edged shapes. After Effects users know this as the Posterize effect, where you set a level count per channel. Procreate has nothing that direct, so you simulate it with tools that remap or isolate tone.
That is also why a Google search for the term in Procreate returns so little. The feature goes by other names: stencil portrait, flat-color reduction, value study, or gradient map. If you want the GIF-style look of fewer colors, you are really building a limited palette and assigning it to value ranges.
For motion work, this matters because posterized stills make good style frames, animation key poses, and reference for a look you plan to carry into After Effects or a 3D render.
Prepare the Image First
Preparation decides whether the result looks crisp or muddy.
- Start from an unedited source. Filters and heavy camera-roll edits introduce noise and soft gradients that make clean shape boundaries harder to get.
- Choose a photo with clear value separation. Strong contrast, good focus, and a large file size give you better edges. Flat, foggy images posterize into mush.
- Size the canvas for the final use. If the frame is going into a video timeline, set the canvas to your delivery resolution or a clean multiple of it. Resampling a flattened posterized image later softens the hard edges you just created.
- Insert the photo via Actions (wrench icon) > Add > Insert a photo. Keep it on its own layer so you can hide or revisit it.
- Duplicate the layer before you start. Every method below is destructive to the pixels it touches, so keep a clean original.
If the source is noisy, a light Gaussian Blur (Adjustments > Gaussian Blur) before posterizing helps. It stops stray pixels from becoming speckled islands of color. Keep the amount low so you don't erase detail you care about.
Method 1: Gradient Map for Fast Tonal Posterizing
This is the closest to a true posterize workflow. It works on value, so it's predictable.
- Desaturate the photo. Open Adjustments > Hue, Saturation, Brightness and pull saturation to zero. You now see the pure value structure.
- Open Adjustments > Gradient Map. This remaps shadows, midtones, and highlights to the colors of a gradient.
- Choose or build a gradient with distinct color stops. A smooth gradient yields a smooth recolor, not a posterized one. For the flat-band look you need hard transitions between colors, with stops placed close together so each color holds a wide, even band. Depending on your Procreate version, custom gradient maps may be limited, so test what your build allows.
- Adjust contrast before mapping. Use Curves to push or pull the tonal distribution so each color covers the area you want. Mapping happens after tone, so changing the curve shifts where the bands land.
If your gradient map still looks too smooth, move to the Curves method below, which gives you more direct control over banding.
Method 2: Stepped Curves
Curves lets you impose steps on the tonal range, which is the mathematical definition of posterization.
- Duplicate the photo layer and desaturate it if you want a value-only result.
- Open Adjustments > Curves and work in the Gamma (combined) graph, or edit the red, green, and blue channels separately for a color-posterized result.
- Add control points to build a staircase: flat horizontal runs followed by sharp vertical jumps. Fewer steps means harsher posterization.
- Drag points until the bands fall where the image's major forms are.
This is fiddly on a touchscreen, and you won't get perfectly square steps. Treat it as a quick approximation, then clean the result up with a selection or by painting over problem areas. It's useful for finding the look. For a precise result, switch to Method 3.
Method 3: Selection-Based Flat Color Fills
This method gives you the most control and the cleanest shapes. It is the technique most Procreate artists mean when they talk about posterizing a photo.
- Pick a palette. Decide on three to six colors before you begin, or sketch the palette in Procreate's color panel. You can still change colors later.
- Make a new layer per color or tonal band. Separate layers let you recolor, reorder, and animate later.
- Use the Selection tool in Automatic mode. Tap an area of the photo, then drag your finger or pencil to set the threshold. Low thresholds grab tight tonal ranges, and high thresholds spread across more similar tones.
- Add to the selection by tapping more regions until the selection covers everything that belongs to one band, such as all the darkest shadows.
- Fill the selection. Drag the swatch from the color panel into the selection, or fill the layer with Fill Layer. Do this on the layer you created for that band.
- Repeat for each tonal band, working from dark to light or the reverse so the layers stack in a logical order.
- Hide the source photo to check the posterized result alone.
Recoloring After the Fact
Because each band lives on its own layer, you can change the whole palette without re-selecting. Select a color layer, then use Adjustments > Hue, Saturation, Brightness to shift it, or lock the layer with Alpha Lock and refill. This is where Procreate pays off for look development: you can test ten palettes in a few minutes.
Method 4: Hand-Built Stencil Layers
This approach is slower but gives you the most illustrative result. Desaturate the photo as a guide, then create a new layer for each tone. Paint the shapes with a pen such as the Studio Pen, with stabilization and streamline adjusted for smooth outlines. Fill each region with its color.
A useful trick from stencil portrait artists is a value cheat sheet. Paint a strip of the colors you plan to use on a spare canvas, then desaturate it. Whatever each color looks like in grayscale tells you which tone it will sit in. This keeps a rainbow or non-naturalistic palette reading correctly. A bright yellow and a pale pink might look different in color but collapse into the same value, and the cheat sheet shows that before you commit.
Common Problems and Fixes
- Speckled, noisy bands: Blur slightly before selecting, or raise the Automatic Selection threshold. You can also clean up by erasing stray fragments on each layer.
- Jagged edges: Selection edges can look stair-stepped. Turn on a small amount of feather, or redraw the edge by hand on the final layer.
- Bands that don't match the form: Adjust Curves before mapping or selecting so the key shapes fall within distinct tonal ranges.
- Colors that look different than expected: Check the value in grayscale. Hue is not the same as brightness.
- Not enough contrast between neighboring bands: Widen the palette's value gaps. Posterization needs clear steps.
Taking Posterized Procreate Art Into a Motion Pipeline
Procreate is a stills tool, but posterized work translates well into animation.
- Export layered files. Export as PSD to keep each color band as a separate layer, then import into After Effects as a composition. You can animate bands independently or apply expressions per layer.
- Export flat PNGs for reference. A single posterized frame works as a style frame, a color script entry, or a lookdev target.
- Use Procreate's Animation Assist for rough motion. It suits quick tests of cel-style movement before committing to a full pipeline.
- Recreate the look procedurally when you need it on footage. After Effects has a Posterize effect under Stylize, and you can combine it with Levels, Curves, or Gradient-style color mapping. Blender's compositor offers a Posterize node and Color Ramp with constant interpolation, and Nuke has equivalent color nodes. Procreate is the place to design the palette, and the compositing tool is where you apply it across a sequence.
The key limitation is that Procreate's posterize methods are manual and per-image. They don't scale to video, and they don't give you consistent frame-to-frame results unless you redo the work for every frame.
Where Styleframe Fits
When a posterized Procreate frame defines the look you want but you need it across moving footage or generated shots, Styleframe is a practical next step. It is an AI video and motion tool built for artistic control rather than one-click output. Every generation is driven by reference images, video clips, and keyframes.
Here is how it connects to this workflow:
- Restyle and Ink-and-Paint apply a look to your material using a reference. Your posterized Procreate frame can serve as that style reference, so the flat-color, limited-palette aesthetic you designed carries into new imagery.
- Frames-to-Video is keyframe-driven. You supply start and end frames, including stills you built in Procreate, and it generates the motion between them.
- Remove Background, 2D-to-3D, and Turntable help with isolating subjects and exploring them from different angles, useful when a flat illustrated character needs to turn or move through space.
- 4K Upscale brings output to production-ready 4K resolution.
Iteration is non-destructive, so you can try variations without losing earlier results. Styleframe exports image sequences, so the output drops into After Effects or Nuke for compositing, grading, and final polish. An After Effects plugin is on the way. It isn't a replacement for your compositing setup, and you keep the workflow you already have.
A Practical Workflow Summary
- Prepare a clean, high-contrast source on a correctly sized canvas.
- Desaturate to see values, and adjust contrast with Curves.
- Choose a method: Gradient Map for speed, stepped Curves for approximation, selection fills for precision, or hand-built stencils for illustration.
- Keep each color band on its own layer so you can recolor and reorder.
- Export a layered PSD for After Effects work and a flat PNG for reference.
- If you need the look in motion, use the posterized frame as reference in a controlled tool such as Styleframe, then finish in After Effects or Nuke.
Posterizing in Procreate rewards a deliberate approach. Treat it as a value-and-palette exercise rather than a filter, and you'll get cleaner shapes and a look you can carry into motion work.