How to Pair Bamboo Stylus with Procreate
StyleFrame Team7 min read
To pair a Bluetooth Bamboo stylus (such as the Bamboo Stylus fineline or Fineline 2) with Procreate, charge the stylus, turn on Bluetooth on your iPad, and switch off multitasking gestures in iPad settings. Then open Procreate, choose the Wacom stylus option in the Actions menu, and press the button on the stylus until the blue LED blinks and then stays lit. The pairing happens inside the app, not in the iPad's Bluetooth device list, so you repeat it per app.
First, Identify Which Bamboo Stylus You Have
"Bamboo stylus" covers several products, and this guide covers the Bluetooth fineline models.
- Bluetooth models (Bamboo Stylus fineline, Bamboo Fineline 2): These are rechargeable, have a side button and an LED, and add pressure sensitivity, palm rejection, and shortcut functionality in supported apps. These are the ones you pair.
Wacom lists Procreate among the supported apps for its fineline styluses, with an asterisk. Treat that as a reminder to check current compatibility for your iPad model, iPadOS version, and Procreate version before you spend an afternoon troubleshooting.
What You Need Before You Start
- A charged Bamboo fineline-style stylus. Wacom's guidance for the first-generation fineline is a USB charge of about two hours, with a battery that lasts up to 26 hours. The Fineline 2 is ready when its LED turns off during charging.
- An iPad with Bluetooth enabled.
- Procreate installed and updated to the newest version your iPad supports.
- Any other stylus apps (Bamboo Paper, Notes apps) closed, so they don't hold the connection.
How to Pair a Bamboo Stylus with Procreate
Step 1: Charge the stylus
Connect it to a computer or USB charger with the supplied cable. Let it finish charging before you pair.
Step 2: Prepare the iPad
- Open Settings and turn Bluetooth on.
- In General settings, switch off the multitasking gestures option (labeled "Multitasking Gestures" or just "Gestures," depending on your iPadOS version). Wacom recommends this for stable connections and better palm rejection.
Step 3: Open Procreate and select the stylus
- Open Procreate and open or create a canvas.
- Tap the Actions menu.
- Look for the device or stylus connection options and choose the Wacom stylus entry. Menu labels differ between Procreate versions. Some community instructions refer to a "Device" option listing a Wacom stylus.
- Tap the Wacom option once. You don't need to hold it down. Procreate begins searching for a nearby stylus.
Step 4: Press the stylus button
Press the side button on the stylus. The LED starts blinking blue. Wacom's fineline guide says pairing is complete when the LED lights solid; for the first-generation model, that is about two seconds. If nothing happens, press the button again while Procreate is still searching.
Step 5: Test it
Draw a few strokes with a soft brush. Press lightly and then hard. If stroke width or opacity changes, pressure is working. Rest your palm on the glass to check palm rejection.
Step 6: Re-pair when needed
Wacom notes that when you re-enter an app, you may need to press the stylus button again to reconnect. Treat that as normal behavior rather than a failed pairing.
Troubleshooting Common Pairing Problems
The connection wheel keeps spinning
This problem is reported in Procreate's community help threads. Work through these in order:
- Tap the Wacom option once, then press a stylus button while the spinner is active.
- Fully disconnect the stylus from Bamboo Paper or any other app that paired with it earlier.
- Confirm the stylus is charged and powered on.
- Toggle Bluetooth off and on, then restart the iPad.
- Delete and reinstall Procreate only as a last resort, since it didn't help in the documented case and you risk losing work if you haven't backed up.
It works in Bamboo Paper but not in Procreate
This pattern may point to app or OS compatibility rather than a faulty stylus. In one support thread, a user on an older iPad stuck at iOS 9.3.5 could pair in Bamboo Paper but not in Procreate. The same user saw a "Not Compatible Stylus" message on an iPad Pro. Older hardware and newer software can each fall outside what a given Procreate version supports for third-party Bluetooth styluses. Check Procreate's current handbook and Wacom's support pages for your exact combination.
The stylus draws but without pressure
If strokes appear but pressure doesn't register, the stylus is acting like a basic capacitive pen. The pairing didn't complete. Repeat Steps 3 and 4, and watch the LED for the transition from blinking to solid.
Palm rejection is unreliable
Re-check that multitasking gestures are off. Then make sure no other app is holding the stylus connection, and restart Procreate.
Dial In Pressure and Smoothing After Pairing
Once connected, spend five minutes on settings. A stylus that is technically paired but poorly tuned will feel wrong, especially for the clean line work that motion designers rely on.
- Pressure curve: Adjust the pressure response in Procreate's preferences, if your version exposes it, until light strokes produce thin, controllable lines.
- Stabilization: Increase stroke stabilization for inking, and lower it for loose gesture sketches.
- Brush size and opacity: Fineline-style tips are thin, so test with a monoline or technical pen brush to judge accuracy.
- Shortcuts: Pairing enables shortcut functionality where the app supports it. Check what the stylus button does in your Procreate version before relying on it.
Why Motion Designers Pair a Stylus With Procreate
If you work in After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke, Procreate is rarely your final destination, but it is a fast place to originate material:
- Storyboards and animatics: Thumbnails and boards that you export and drop into a Premiere Pro timeline.
- Styleframes: Quick key art that defines palette, texture, and lighting before you build in 3D or comp.
- Frame-by-frame passes: Hand-drawn accents, smears, and cleanup that you export as PNG sequences or layered files for compositing.
- Matte and paint-over ideas: Rough paint-overs on a render still to communicate direction to a team.
For this kind of work, a pressure-sensitive stylus is worth the five-minute setup, because line quality and consistent stroke weight carry through into everything downstream.
Extending Procreate Sketches With Styleframe
A hand-drawn board is a strong starting point, and Styleframe is built to take that kind of artist-made input further without handing control to a one-click black box. Styleframe is an AI video and motion tool for professional artistic control, and every generation is driven by your own references, clips, and keyframes.
Styleframe doesn't replace the stylus or the drawing step. It gives your Procreate work a path into motion.
Quick Checklist
- Confirm your Bamboo stylus is a Bluetooth model with a button and LED.
- Charge it fully.
- Turn on iPad Bluetooth and disable multitasking gestures.
- Open Procreate, go to Actions, and tap the Wacom stylus option once.
- Press the stylus button until the LED blinks blue and then stays on.
- Draw test strokes to verify pressure and palm rejection.
- Re-press the button whenever you reopen the app.
FAQ
Do I pair the Bamboo stylus in iPad Bluetooth settings? No. Bluetooth must be on, but the stylus connects inside the drawing app, and Wacom's instructions tell you to repeat the process for each app you use.
Why does my stylus draw but not respond to pressure? It is likely acting as a basic capacitive pen. Repeat the pairing steps and confirm the LED goes solid.
Can one stylus stay paired to several apps at once? Procreate's support team advises fully disconnecting the stylus from Bamboo Paper and any other apps before connecting it in Procreate. Close or disconnect from other apps before pairing in Procreate.
What if my iPad is old? Older iPads stuck on older iOS versions may not be compatible with current Procreate and stylus combinations, as reported in a Procreate support thread. Verify compatibility before buying or troubleshooting extensively.