How to Pair Bamboo Sketch with Procreate
StyleFrame Team8 min read
To pair Bamboo Sketch with Procreate, charge the stylus, switch it on with the lower side button, and enable Bluetooth on your iPad or iPhone. Then open Procreate, select Bamboo Sketch (or Wacom Stylus) as the stylus if your version offers that option, and press the lower side button again. Pairing is done when the LED stays lit. On iPad, also turn off multitasking gestures in Settings so system swipes don't interrupt your strokes.
What You Need Before You Start
Bamboo Sketch is a Bluetooth stylus for iPad and iPhone, not a pen tablet that plugs into a desktop. Before pairing, confirm the following:
- A compatible iPad or iPhone. Wacom publishes a device compatibility list. Check your model against it before troubleshooting anything else.
- Procreate installed and updated. Procreate is on Wacom's list of supported apps for Bamboo Sketch, though the list marks it with an asterisk. Check Wacom's support page for the current notes.
- The included USB charger. The stylus snaps onto a magnetic connector for charging.
- Bluetooth enabled on the iPad or iPhone.
If you are a motion designer who usually works on a Wacom Intuos or Cintiq at your desk, treat this as a separate setup. The Bamboo Sketch lives in the iPad sketching side of your workflow, where you generate boards, character designs, and rough animation.
Step 1: Charge and Power On the Stylus
- Plug the USB charger into a computer port or a USB power adapter.
- Snap Bamboo Sketch onto the magnetic connector.
- Wait for the LED to turn off. A full charge can take up to two hours.
- Press the lower side button to power the stylus on. The LED blinks blue for about two seconds.
A half-charged stylus can behave erratically during pairing, so let it finish the first charge.
Step 2: Prepare Your iPad or iPhone
- Open Settings and turn on Bluetooth.
- On iPad, go to General → Multitasking (the exact label varies by iPadOS version) and disable Gestures. Skip this on iPhone.
You normally don't pair Bamboo Sketch in the system Bluetooth list. Pairing happens inside the drawing app, which is the step people most often miss.
Step 3: Pair Inside Procreate
- Open Procreate and create or open a canvas.
- Open the Actions menu.
- Look for the stylus connection option. Menu names have shifted across Procreate versions. Some older guides describe Actions → Device and selecting a Wacom stylus entry, with Procreate then searching for nearby pens and pairing automatically. In newer versions, check the app's settings for stylus options.
- If you're prompted to choose a stylus, pick Bamboo Sketch, Bamboo Stylus, or Wacom Stylus. The name depends on the app version.
- Press the lower side button on the stylus. The LED stays on once pairing succeeds.
- Draw a few strokes on the canvas to confirm that pressure registers.
Wacom's guidance is that the pairing flow and stylus name vary by app. The first time you use the stylus in an app, repeat the in-app selection and button press. After that, pressing the lower side button when you re-enter the app is usually enough to reconnect.
Step 4: Tune Pressure and Smoothing
A paired stylus that feels wrong is almost as bad as an unpaired one. Spend five minutes on calibration before you start real work:
- Pressure curve. In Procreate's settings, look for the pressure and smoothing options and adjust the curve until light strokes taper and heavy strokes build density the way you expect.
- Brush-level dynamics. In each brush's settings, check its pressure response. A brush built for Apple Pencil may feel different with a third-party stylus.
- Test line quality. Draw slow curves, fast flicks, and tight hatching. Look for stepping or lag, which usually points to a connection or smoothing issue rather than the brush.
Save your tuned brushes into a dedicated set for animation roughs so you aren't re-tuning every project.
Troubleshooting Common Pairing Problems
The stylus won't connect. Confirm Bluetooth is on, the stylus is charged, and Procreate is the active app. Press the lower side button once more while a canvas is open. Wacom's instructions repeat the button press for first-time pairing in each app.
The LED doesn't stay on. Charge the stylus fully and power it off and on again. If it still won't hold a connection, try pairing in another supported app such as Bamboo Paper or Concepts to isolate whether the stylus or Procreate is the problem.
Strokes trigger system gestures. On iPad, recheck that multitasking gestures are off. Gesture swipes from screen edges can interrupt drawing, especially when your hand rests near the bezel.
Pressure feels flat or inconsistent. Recheck the pressure curve in Procreate. Then test in a different brush, since some brushes ignore pressure entirely.
Palm rejection isn't behaving. Support for palm rejection, pressure sensitivity, and shortcut functionality differs by app, according to Wacom's compatibility table. Check the current notes for Procreate, and don't assume every feature behaves identically to a first-party pencil.
The wrong stylus is selected. If you also own an Apple Pencil, make sure Procreate isn't set to a different input. Switching between styluses mid-session can cause confusing results.
Not working on a desktop. Bamboo Sketch is designed for iPad and iPhone apps. Don't expect it to behave like a driver-backed pen tablet on macOS or Windows. If a site tells you otherwise, verify against Wacom's own documentation.
A Practical Procreate-to-After Effects Workflow
Pairing the stylus is the easy part. The more important question for motion designers is what happens after the sketch exists. A workable pipeline looks like this:
- Rough on iPad. Block out storyboards, character poses, and style explorations in Procreate with Bamboo Sketch. Keep each element on its own layer.
- Organize layers deliberately. Name layers, separate line art from color, and keep backgrounds on their own layer. Clean layers save hours in compositing.
- Export. Procreate can export layered PSD files and flat PNGs. For frame-by-frame work, use Procreate's animation tools and export a PNG sequence, or export individual frames manually.
- Import into After Effects. Bring PSDs in as compositions with layer sizes preserved, or import PNG sequences as footage. From there you rig, parallax, and composite as usual.
- Round-trip. Send frames back to the iPad for paint-over, then re-import. Keep a consistent naming convention so replacements update cleanly.
If your pipeline runs through Premiere Pro, Cinema 4D, Blender, or Nuke, the same principle applies. Export layered or sequence assets from Procreate and treat them as plates, textures, or reference.
Where Styleframe Fits After the Sketch
Once your Procreate frames exist, the next question is how to extend them into motion without redrawing every in-between. Styleframe is an AI video and motion tool built for artistic control rather than one-click output. You drive each generation with reference images, video clips, and keyframes, and your sketches can serve as that source material.
A few practical ways it connects to a Procreate workflow:
- Frames-to-Video. Use your hand-drawn start and end poses as keyframes and generate the motion between them. You decide the anchor frames, so the drawing stays yours.
- Restyle and Ink-and-Paint. These are reference-driven style transfer tools. Feed in a Procreate frame as the style reference to carry your line quality and palette across footage or generated clips.
- 2D-to-3D and Turntable. Turn a character or prop sketch into a 3D-style view, then generate a turntable for model-sheet reference.
- Remove Background and 4K Upscale. Isolate a character from a sketch plate for compositing, and upscale results to production-ready 4K.
Iteration is non-destructive, so you can try several variations from the same keyframes without losing earlier passes. Output exports as image sequences, so it drops straight into After Effects or Nuke. The image-sequence route keeps your compositing workflow intact. Styleframe doesn't replace the sketching stage or your compositor. It extends your drawn frames into motion while you keep control of the look.
Quick Checklist
- Charge Bamboo Sketch fully, then power it on with the lower side button.
- Turn on Bluetooth on your iPad or iPhone, and disable multitasking gestures on iPad.
- Open Procreate, find the stylus option for your version, and select Bamboo Sketch or Wacom Stylus.
- Press the lower side button until the LED stays on.
- Tune the pressure curve, then test brushes.
- Name layers, export PSD or PNG sequences, and bring them into After Effects.
FAQ
Do I pair Bamboo Sketch in the iPad Bluetooth menu? Generally no. Wacom's setup has you enable Bluetooth, then pair inside the drawing app by selecting the stylus and pressing the lower side button.
Do I need to repeat pairing every time? The in-app selection is a first-time step per app. When you re-enter the app later, Wacom says to press the lower side button to reconnect.
Does it work with apps other than Procreate? Yes. Wacom's list includes Bamboo Paper, Concepts, Autodesk SketchBook, ArtRage, MediBang, and others, with feature support varying by app.
Can I use it to sketch for motion projects? Yes. Sketch, rough, and paint on iPad, then export layered files or PNG sequences into After Effects or your compositor of choice.