How to Pair Apple Pencil with Procreate
StyleFrame Team7 min read
Apple Pencil pairs with your iPad, not with Procreate, so there is no in-app pairing step. Attach a 2nd-generation Apple Pencil or Apple Pencil Pro to the magnetic side connector of a compatible iPad, or plug a first-generation Pencil into the iPad's charging port, then open Procreate and draw. If the Pencil doesn't respond, the cause is almost always the Bluetooth connection, a loose nib, or a size/opacity slider set too low, not a missing Procreate setting.
How Apple Pencil Pairing Works
Procreate supports Apple Pencil natively. Once the Pencil is paired with the iPad at the system level, every app that supports it can use it, including Procreate and Notes. That is why you won't find the Pencil in Procreate's old "Devices" list. That list was for third-party styluses from the early iPad Pro days, and advice that sends you hunting for a pairing dot in the wrench menu is out of date.
Check that your iPad and Pencil are compatible before you start.
Step-by-Step: Pair Apple Pencil with Your iPad
Apple Pencil Pro and 2nd-generation Apple Pencil
- Turn on Bluetooth in Settings > Bluetooth.
- Attach the Pencil to the flat magnetic edge on the side of the iPad.
- When the pairing prompt appears, tap Pair.
- Confirm that a battery indicator or Pencil connection status appears.
First-generation Apple Pencil
- Remove the cap from the end of the Pencil.
- Plug it into the iPad's Lightning port.
- Tap Pair when the prompt appears.
If you're unsure which Pencil you own, the Pencil Pro has its name printed on the barrel.
Confirm It Works in Procreate
- Open Procreate and create a new canvas.
- Choose a simple brush such as the Technical Pen from the Inking set.
- Make sure the Size and Opacity sliders in the sidebar are turned up, since a nearly transparent or tiny brush can look like a dead Pencil.
- Draw a few strokes with varying pressure.
You should see line weight or opacity change as you press harder. Tilt the Pencil and shading brushes should react as well. If you have a Pencil Pro, squeeze and barrel roll work in brushes that are set up to respond to them.
Set Up Shortcuts and Behavior
Pairing is only half the setup. A few settings make the Pencil much more useful for sustained work.
iPadOS settings
Open Settings > Apple Pencil. Depending on your model, you can configure:
- Double-tap (2nd generation and Pro): by default this switches between your current tool and the eraser. Other options include switching to the last-used tool, showing the color palette, or turning it off.
- Squeeze (Pencil Pro): choose an action such as showing the tool palette, and adjust how sensitive the squeeze is if you trigger it by accident.
- Only Draw with Apple Pencil: prevents stray strokes from your palm or fingers. Many illustrators leave this on.
- Hover, haptics, and shadow effects (Pencil Pro): optional feedback toggles. Turn them on or off depending on whether you find them useful.
Note that turning double-tap off in system settings disables it inside Procreate too.
Procreate gesture controls
If you'd rather map the double-tap to a Procreate-specific action, open Procreate's Gesture Controls and look at the Apple Pencil options. You can assign actions such as:
- Toggle Drawing Assist
- Invoke the Eyedropper
- Trigger QuickShape
- Open QuickMenu
- Toggle full screen
- Clear layer
- Open the copy/paste menu
For rough boards and styleframes, Eyedropper on double-tap is one option, since it keeps your palette tight without leaving the canvas.
Tune pressure sensitivity
The Apple Pencil has a wide dynamic range, so with default settings you may have to press fairly hard to reach full opacity. If your touch is light, adjust Procreate's pressure response. In current versions this is the App Pressure Sensitivity curve in Prefs (older versions call it the Pressure Curve). Inking-style brushes and painterly brushes often feel best with different curve shapes, so test both. You can also edit pressure behavior per brush: open the brush, go to its settings, and look in the Apple Pencil section.
Troubleshooting: Apple Pencil Not Working in Procreate
Work through these in order, from quickest to most involved.
1. Check the canvas and brush basics
- Raise the Size and Opacity sliders to the top.
- Confirm you have a visible color selected.
- Make sure you're on an unlocked, visible layer.
- Try a different brush, since some brushes need higher opacity values to respond to the Pencil.
2. Test the Pencil in another app
Open Notes and write something. If it works there but not in Procreate, the issue is app settings. If it fails everywhere, it's a connection or hardware problem.
3. Tighten the nib
A loose tip can cause dropped or missing input. Twist the nib until it's snug. Replace it if it's worn down.
4. Check Bluetooth status
Go to Settings > Bluetooth and look for your Apple Pencil. If it says "Not Connected," tap it and re-pair by attaching it magnetically or plugging it in, depending on your model.
5. Forget and re-pair
If it still misbehaves, tap the i next to the Pencil in Bluetooth settings, choose Forget This Device, and pair it again. This resolves most connection issues.
6. Restart and update
Restart the iPad, then check for iPadOS and Procreate updates.
7. Consider hardware
If pressure or tilt doesn't register in any app after these steps, the Pencil or its sensors may be faulty. An Apple Store can test it on your iPad, ideally next to a known-good Pencil.
Where Procreate Fits in a Motion Workflow
For motion designers and animators, a paired Pencil is a fast way to get hand-drawn material into a pipeline. Common uses include:
- Storyboards and animatics: quick compositions you can drop into Premiere Pro or After Effects as a timing reference.
- Styleframes: painted or inked frames that set look and palette before a job moves into After Effects, Cinema 4D, or Blender.
- Character and prop design: clean layered drawings you can rig or cut out for puppet-style animation.
- Matte and texture painting: hand-painted elements that get composited in After Effects or Nuke.
Keeping layers separated makes the handoff to After Effects far cleaner than exporting a single flattened image.
Using Your Procreate Drawings with Styleframe
Once you have a drawing or a pair of keyframes from Procreate, the next question is how to turn them into motion without losing the look you drew. This is where can sit alongside your existing tools. It's an AI video and motion tool built around artistic control rather than a one-click black box, and it works from your own references: images, video clips, and keyframes.
As with any generative tool, results depend on the quality and clarity of your references. A clean, deliberate Procreate drawing is a strong starting point precisely because you've already made the creative decisions.
Quick Reference
Final Notes
Pairing an Apple Pencil for Procreate is a system-level task: pair it with the iPad, open Procreate, and draw. After that, the time is better spent on pressure curves, gesture shortcuts, and brush settings that match how you work. And when your drawings need to become animated, composited shots, export clean layers or image sequences and bring them into the pipeline you already use.