How to Paint Watercolor Procreate
StyleFrame Team9 min read
To paint watercolor in Procreate, start with a paper texture on your canvas, then build the painting in transparent washes with a watercolor brush, one stroke at a time without lifting the Apple Pencil. Blend edges with the Smudge tool, add darker pigment in layered glazes, and use clipping masks to keep color inside your shapes. Finish with a few opaque details and loose splatters so the piece reads as hand-painted rather than airbrushed. For motion work, paint on separate layers so you can export and animate each element later.
What You Need Before You Start
Procreate doesn't simulate water and pigment physics. Its watercolor look comes from brush textures, opacity behavior, and paper grain. Users in Procreate's own feedback forum point out that true wet-on-wet diffusion and drying time are missing, and some artists turn to dedicated apps like Expresii or Rebelle for that. In practice, a good brush set and a convincing paper texture get you most of the way.
You'll want:
- A watercolor brush set. Procreate's built-in brushes work, and many artists add third-party sets. Look for at least a transparent round brush for washes, an opaque brush for details, and a blending brush.
- A paper texture. Cold-press and rough textures give visible grain in the pigment. This single element does more for realism than any brush setting.
- A reference image or sketch. Even loose abstract work benefits from a value map.
- A color palette. Limit yourself to five or six colors. Watercolor looks cohesive when pigments are related.
Step 1: Set Up the Canvas and Paper Texture
Create a new canvas at a size that suits the final use. For print, something like letter size at 300 DPI is a common baseline. For video, set pixel dimensions to match your delivery format, such as 3840×2160 for UHD. Very large canvases can be heavy on older iPads, so consider your device's limits before committing to a large, complex painting.
Place a paper texture on the bottom layer. If the texture is seamless, copy and tile it to fill the canvas. If your brush set includes a texture, use that one, because the brushes are usually tuned to it.
Keep the paper on its own layer. If you later need a transparent background for compositing, you can hide it and still keep the grain available as a separate overlay.
Step 2: Sketch and Set Up Layers
Draw a loose pencil sketch on its own layer. Once the shapes are right, lower the sketch opacity so it guides you without competing with the paint.
Create your painting layers underneath the sketch. A tighter sketch produces a tighter painting, so draw less if you want a looser result. Separating major elements, such as subject, background, and accents, onto different layers gives you more control now and more flexibility if you animate later.
Step 3: Lay Down Transparent Washes
Choose a transparent round brush and block in your lightest, largest areas first. Real watercolor works light to dark, and the same logic holds here.
Two habits matter most:
- Don't lift the pencil mid-shape. Each new stroke on the same layer overlaps the previous one and creates a darker band, much like a hard edge in real paint. Fill each shape in one continuous motion where you can.
- Let transparency do the work. Because these brushes are see-through, painting a second color over the first mixes them. Use this to darken shadows around forms instead of reaching for a new dark color.
Work wet shapes first and refine later. Staying loose at this stage is the difference between watercolor and flat digital fill.
Step 4: Use Clipping Masks for Clean Edges
If you want crisp control without erasing constantly, fill a shape with a solid color on its own layer, then add a new layer above it and turn on Clipping Mask. Anything you paint on the clipped layer appears only inside the shape below it.
This approach helps in three ways:
- You can paint boldly without staying inside the lines.
- Each shape has its own layer for shading and color adjustments.
- You can stack multiple clipped layers for glazes and shadows.
Set shadow layers to Multiply and paint with the same hue as the base. This darkens the color naturally without introducing a new pigment. You can also use Multiply for ambient light or color temperature shifts. Save your palette as a swatch set so you can eyedrop consistently.
Step 5: Blend and Create Soft Edges
Soft transitions are what make a painting feel wet. Paint a darker patch near an edge, then pick the Smudge tool and select a blending brush. Drag from the dark area into the lighter one, which simulates pigment bleeding into a damp area.
Tips for believable blends:
- Use the Smudge tool with a textured brush, not a hard round one. Texture keeps the grain visible in the transition.
- Smudge at low pressure first and build up. Heavy smudging flattens the paper grain.
- Leave some edges hard. A mix of soft and hard edges is the signature of real watercolor, since hard edges appear where a wash dried before the next one touched it.
- Leave tiny voids of paper on purpose. Gaps in coverage read as the white of the page.
Step 6: Add Detail with an Opaque Brush
Once the washes are in place, switch to an opaque brush for the focal area. Opaque brushes paint over what's underneath rather than mixing with it, so they suit pupils, sharp shadows, and highlights. Use white sparingly for highlights, since pure white is a rare element in real watercolor and can look pasted on.
Keep detail concentrated in one area. If everything is crisp, the painting loses its looseness. Let the periphery stay suggestive.
Step 7: Finish with Runs, Splatters, and Edge Variation
Watercolor looks finished when it escapes the sketch slightly. Add splatter and run brushes on a new layer, and let a few washes extend beyond the original drawing. Then add a subtle edge darkening to larger shapes: a thin, slightly darker line along the border mimics pigment pooling as a wash dries.
Finally, check the whole image at a small size. If the values read clearly in a thumbnail, you're done. If it looks muddy, darken a few shadows or lift some highlights with an eraser using a texture brush.
Common Mistakes to Avoid
- Too many colors. Muddy results often come from mixing too many hues at once.
- Over-smudging. It erases grain and makes the painting look airbrushed.
- Working dark first. You can't easily go lighter with transparent brushes.
- Uniform edges. If every edge is soft or every edge is hard, the painting looks digital.
- Ignoring paper texture. A flat white background undermines the whole effect.
Taking Procreate Watercolor into a Motion Pipeline
If you're a motion designer or animator, a watercolor painting is often a source asset rather than the final deliverable. A few habits make that handoff smoother.
Keep elements on separate layers. Name them and group them by depth. Exporting your layers separately lets you parallax, mask, or animate each piece individually in your compositing software.
Paint at delivery resolution. Upscaling a small canvas softens paper grain and exposes brush texture artifacts. If you can't paint at full size, plan an upscaling step.
Export clean alphas. Hide the paper layer and export the pigment on transparency. You can then multiply a scanned or generated paper texture back in, which keeps the grain stable instead of moving with your artwork.
Consider the boil. In traditional watercolor animation, the slight jitter between frames is part of the look. Painting several variations of a shape and cycling them in After Effects gives the same effect with less work than redrawing every frame.
Where Styleframe Fits in a Watercolor Workflow
Painting every frame by hand is slow, and that's where an AI video tool built for artistic control can help. Styleframe is designed for artists who want to direct the result rather than accept a one-click black box. Generations are driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can try variations without losing earlier work.
Several tools map directly to a watercolor workflow:
- Restyle and Ink-and-Paint use reference-driven style transfer. You can use your Procreate painting as the style reference and apply that look to footage or animation, so the brush texture and pigment feel come from your own artwork.
- Frames-to-Video is keyframe-driven. Paint a start and end frame in Procreate, and use them to guide the motion between.
- Remove Background isolates a painted or restyled subject for layering in a composite.
- 4K Upscale helps when your source painting or generated clip needs more resolution for delivery.
- 2D-to-3D and Turntable are useful when a painted character or object needs to rotate or be viewed from other angles.
Styleframe exports image sequences, so the output can slot into the compositing setup you already use. You keep your paper overlays, color correction, and final grade in your own pipeline, and Styleframe handles the generation and style-transfer steps in between.
A practical approach is to paint two or three hero frames in Procreate, use them as references for Restyle or as keyframes for Frames-to-Video, then composite the resulting sequence with your painted textures in After Effects. Results depend on your references and how clearly you direct the generation, so expect to iterate.
Quick Checklist
- Set canvas size for the final use and add a paper texture.
- Sketch loosely and lower the sketch opacity.
- Paint light washes with a transparent brush, without lifting mid-shape.
- Use clipping masks and Multiply layers for shading.
- Blend selectively with a textured Smudge brush.
- Add opaque details only at the focal point.
- Add splatters and edge darkening, then check at thumbnail size.
- Export layered files or transparent PNGs for animation.
Watercolor in Procreate rewards restraint: fewer colors, fewer strokes, and a convincing paper texture. Once you have a look you like, that painting can become a reference, a keyframe, or a layer in a larger motion project.