How to Paint the Electro Wizard Procreate
StyleFrame Team9 min read
To paint the Electro Wizard in Procreate, build him as separate layers: a clean silhouette, flat base colors, clipped shading, then electric glow effects on their own layers. Gather reference of the character first, sketch the pose in a loose outline, and lock the shapes with a monoline brush before you color. Keeping hair, robe, face, hands, and lightning on separate layers gives you a painting that's easy to revise and ready to animate later.
Before You Start: Reference and Scope
The Electro Wizard is a Clash Royale character, and the character belongs to its rights holder. Fan art is fine for practice and portfolio study, but don't use it commercially without permission. If you need a version for client work, design an original electric-mage character using the same process below.
Collect a few reference images before opening Procreate. Don't paint from memory. Pull the official card art and any in-game poses, then note the character's key identifiers: silhouette, hair shape, eyewear, robe colors, and how the lightning is used as a graphic motif. Check these details against your reference rather than trusting any written description, including this one.
Use Procreate's Reference companion or a second window so your reference stays visible while you work.
Step 1: Set Up the Canvas
Create a custom canvas rather than using a default size. Because you may take the art into After Effects or a video tool later, choose dimensions that match your delivery format, such as 3840×2160 for a 16:9 4K frame, or a portrait size if you're painting a character sheet. Keep DPI reasonable so the layer count doesn't get cut off.
Check the layer limit in Canvas > Canvas Information. Large canvases allow fewer layers, and a layered character can eat through that budget quickly. If you need many layers, reduce the canvas slightly or plan to merge non-essential layers.
Set up a neutral mid-gray background layer so you can judge colors and glows. Glow effects look very different on white than on dark backgrounds, and your electric effects will almost certainly end up on dark.
Step 2: Sketch the Pose and Silhouette
Create a new layer for the sketch and use a pencil or a light inking brush at low opacity. Block in:
- A simple gesture line for the pose
- Head, torso, and limb volumes as basic shapes
- The hat, hair, or other head silhouette
- Where the hands are, since they'll be the source of the lightning
Spend time here. A strong silhouette does more for recognizability than any amount of rendering. Fill the whole character with solid black on a temporary layer and check that the pose still reads. If it doesn't, adjust the shapes before adding detail.
Use QuickShape (draw a line or curve and hold) for straight edges and symmetrical shapes, then tap Edit Shape if you need to correct them. This is useful for clean sleeves, robe hems, and lightning zigzags.
Step 3: Clean Linework
Lower the sketch opacity and add a new layer above it. Choose a monoline-style brush (Procreate's Calligraphy set has a Monoline brush) for a clean, consistent stroke, which suits the stylized, game-art look of this character.
Tips for the line pass:
- Set Streamline in the brush settings to smooth out wobbles.
- Close every shape. Gaps will cause ColorDrop to leak in the next step.
- Vary line weight modestly: slightly thicker on the outer silhouette, thinner on interior details.
- Put linework for different parts (face, hair, robe, accessories) on separate layers if you plan to animate them separately.
Step 4: Flat Colors
Create a layer below the linework for each major element. Drag a color from the color circle into a closed shape to fill it with ColorDrop. If the fill leaks, raise the ColorDrop threshold or close the gap.
A practical layer breakdown:
- Skin (face, hands)
- Hair
- Eyewear or face accessories
- Robe main shape
- Robe trim and details
- Accessories and props
- Back elements, such as a cape or hanging fabric
Build a palette first and save it as a swatch set. Use your reference to sample and lock in the main hues, paying attention to the contrast between the character's colors and the electric tones. Keeping the palette limited makes later shading and glow work much more consistent.
Step 5: Shading with Clipping Masks
Add a new layer above each flat color layer and tap it, then choose Clipping Mask. Anything you paint on the clipped layer is confined to the shape below it, so you can shade freely without worrying about edges.
Use a simple lighting setup:
- Key light direction: Decide where the main light comes from. With a character who generates his own electricity, an effective approach is a cool electric rim light on the side nearest the lightning, plus a normal ambient light on the other side.
- Shadow layer: Set a clipped layer to Multiply and paint shadows with a desaturated, cool purple or blue rather than black.
- Highlight layer: Use a clipped layer on Add or Overlay for bright accents on hair, glasses, or metallic details.
Keep shading shapes hard-edged and graphic for a stylized look. Use a soft airbrush only for transitions where you want atmosphere, not on every surface.
Alpha Lock is a faster alternative for quick color adjustments on a single layer, but clipping masks are better when you want to preserve the ability to edit shading independently.
Step 6: Painting the Electricity
Electric effects are where this character earns its name, and they work best as separate, non-destructive layers.
- Core bolts: On a new layer, draw lightning with a hard brush in a bright near-white. Use angular, branching forms with varied segment lengths so they don't look uniform.
- Inner glow: Duplicate the bolt layer, lock its alpha, and fill it with a saturated electric blue or yellow, depending on your reference. Move it under the core and apply a Gaussian Blur from the Adjustments menu.
- Outer glow: Duplicate again, increase the blur radius, and set the layer to Add (also called Linear Dodge) to create a bright halo.
- Spill light: On a clipped Add layer over the character, paint soft color from the lightning onto nearby surfaces such as sleeves, face, and hair. This integrates the effect into the figure.
- Sparks: Add small particles with a scatter or speckle brush on a separate layer.
Group the effect layers so you can toggle them off. If you plan to animate, keep the bolts on their own group so they can be flickered, offset, or replaced.
Step 7: Final Pass and Cleanup
Hide the sketch layer and review the full image at 100% zoom and at thumbnail size. Check these points:
- Does the silhouette still read at small size?
- Are the brightest values concentrated around the lightning and the face?
- Do colors from the lightning appear in the shadows and rim lights?
- Are there stray fill leaks or mismatched edges?
Make small corrections with Adjustments > Curves or Hue, Saturation, Brightness on grouped layers, and avoid flattening until you're sure you're done.
Exporting from Procreate for Motion Work
If the painting is meant for a motion project, export a layered PSD (Share > PSD) so you can open it in After Effects or Photoshop. Check that blend modes such as Add and Multiply carried over correctly, since they can differ between apps. If something shifts, reapply the blend mode in After Effects.
For a more reliable handoff, also export PNGs of key groups with transparency, such as the character body, hair, hands, and lightning. Name the layers clearly before export. Layer names such as "hair_front" or "bolt_left_glow" save time in a composition.
Procreate also includes Animation Assist for simple frame-by-frame work. It's useful for quick loops and sketches, but for longer or more polished sequences many artists move the painted layers into a dedicated compositing tool.
Taking the Painted Character Into Motion with Styleframe
Once the still is finished, you have a locked-in design. Styleframe is an AI video and motion tool built around artistic control, and it can help extend that painting into moving or multi-view assets without leaving your usual pipeline. Every generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can keep refining without overwriting earlier results.
Here's how it can fit with a painted character like this one:
- Frames-to-Video: Use your painted still as a start or end keyframe and define how the character moves between poses. This is keyframe-driven, so you direct the motion rather than hoping for a lucky result.
- Restyle and Ink-and-Paint: These are reference-driven style transfer tools. Use your painting as the style reference to carry its look onto other footage or frames, such as a rough 3D blockout or live-action reference.
- 2D-to-3D and Turntable: Convert the flat painting into a 3D-style asset and generate a turntable to check how the design reads from other angles, useful for model sheets or Cinema 4D and Blender reference.
- Remove Background: Isolate the character cleanly from the canvas so you can place it in a composite.
You keep your compositing workflow: the painted layers, glows, and color grading you've built stay in your compositing application, and Styleframe supplies motion or alternate views to composite with them.
Results from any generative tool depend on your inputs, so plan to iterate with clear references and check the output against your original design before it goes into a shot.
Common Mistakes to Avoid
- Painting without reference. Small details such as hair shape and accessory placement are what make a character recognizable.
- Using pure black for shadows. It flattens the image and fights the glow. Use tinted darks.
- Flattening early. You lose the ability to adjust or animate individual parts.
- Over-blurring the lightning. Keep a crisp core with a soft halo around it.
- Ignoring the background. Test the character against a few different backgrounds, including dark, saturated ones.
Quick Workflow Summary
- Gather reference and set up a canvas sized for your end use.
- Sketch the pose and test the silhouette.
- Ink with a monoline brush and close all shapes.
- Fill flat colors on separate layers.
- Shade with clipped Multiply and Add layers.
- Build lightning from core, inner glow, outer glow, and spill light.
- Review, adjust, and export layered files for After Effects.
- Extend the finished design into motion or alternate views as the project needs.
The method scales: once you've built the layers this way, you can reuse it for any character with a strong silhouette and a distinct light source.