How to Paint Sunlight in Procreate
StyleFrame Team8 min read
Paint sunlight in Procreate by building it in layers: block in a darker scene first, put a Multiply shadow layer over it, erase or lift the areas where light lands, then add warm color and a glow layer in Add or Color Dodge. Place the warmest, most saturated color right next to the lit edge, push cooler tones into the shadow side, and soften transitions with Gaussian Blur. Keeping light, shadow, and glow on separate layers lets you adjust each one later without repainting.
Decide the light before you paint
Sunlight reads as sunlight when direction, color temperature, and contrast agree with each other. Before opening a brush, answer three questions:
- Where is the sun? Pick a side and keep it fixed. Every highlight, cast shadow, and rim light has to obey it.
- How warm is it? Low sun at dawn or dusk pushes toward orange and red. Midday light is closer to a pale yellow-white.
- How hard is the shadow? Clear air and direct sun give crisp edges. Haze, mist, or cloud cover soften them.
If you come from compositing, treat this as a lighting brief. A quick thumbnail with an arrow for the light direction and three swatches (key light, shadow, ambient bounce) saves a lot of correction later.
Set up the canvas
Procreate's default canvas and sRGB profile are fine for most illustration work. If the painting will end up in a video timeline, set the canvas at your delivery aspect ratio and a resolution you can scale from. Common examples are 3840×2160 for UHD or 1920×1080 for HD.
Keep these layers separate from the start:
- Base paint (background, midground, subject)
- Shadow layer (Multiply, clipped)
- Light color layers (clipped or free)
- Glow and rays (Add or Color Dodge)
- Atmosphere and grading on top
Step 1: Start with a darker base
Sunlight needs something to push against. A bright, evenly lit base leaves nowhere for light to go, so start with the scene in its shaded state: mid-to-dark values, a slightly cool or neutral palette, and clear forms. Tint the background with a hint of the light's color on the side where the sun sits. That cue tells the viewer where the light is coming from even before you paint a single highlight.
Work in grayscale or a limited palette first if you can. If the value structure reads in black and white, the color pass will be much easier.
Step 2: Add a Multiply shadow layer
This is the core technique for dramatic sun.
- Create a new layer above your subject and fill it with a deep, desaturated color. A dark brown works well for warm scenes, and deep blue or purple suits cooler ones.
- Clip it to the subject layer (Clipping Mask) and set the blend mode to Multiply.
- Lower the opacity if it feels too heavy. Somewhere around 80–90% is a reasonable starting point.
- Take the Eraser, set to a hard or medium-soft brush, and erase the shapes where sunlight should hit: a cheek, a rock face, the top of a roof.
The erased shapes become your light pattern. Don't worry if the edges look harsh right now. You'll soften them in a later step, and hard edges at this stage make it easier to design clear, graphic light shapes. Vary the shapes too. Light broken by leaves, window frames, or clouds is more convincing than a single clean cutout.
Step 3: Paint the color of the light
With the light shapes carved out, the next job is color.
- Add a new layer clipped above the Multiply layer, or use Alpha Lock on a dedicated light layer.
- With a soft airbrush, paint a saturated orange just around the edge of the erased area. This is the transition zone where light fades into shadow, and it's usually the richest color in the image.
- Drop to a smaller brush and add a brighter yellow right against the lit edge. Keep it tighter than the orange so it doesn't wash out the shape.
- On the opposite side of the subject, add a cool blue or purple. This reflects ambient sky light in the shadows and gives the scene a warm/cool contrast that makes the sun feel hotter.
The order matters: wide, moderate color first, then narrow, intense color, then the cool counterpoint. Each step is smaller than the last, which concentrates the energy where the light is strongest.
Step 4: Build the glow
Sunlight doesn't just illuminate surfaces. It blooms. Add a new layer above everything and set it to Add (or Color Dodge for a punchier result). Pick a warm, fairly dark orange, because blend modes that brighten amplify color quickly. Then:
- Paint soft glow along the brightest edges and around the sun itself.
- Keep opacity low and build up in passes instead of one heavy stroke.
- Check the result on a duplicate, since Add and Color Dodge can clip to white quickly.
If the image starts to look blown out, lower the layer opacity or swap to Soft Light or Overlay, which are more forgiving.
Step 5: Paint sun rays and atmosphere
Light shafts need atmosphere to catch them, so a clear sky won't show rays at all. Forests, mist, dust, and haze are natural settings.
- On a new layer, paint pale, warm wedges or streaks radiating from the light source. A soft brush works fine, and a textured brush adds a bit of grain.
- Apply Gaussian Blur from the Adjustments menu to soften them, or use Motion Blur or Perspective Blur to stretch the streaks along the direction of the light.
- Set the layer to Add or Screen and lower its opacity until the rays feel like a suggestion instead of a graphic.
- Erase into the rays where tree trunks, branches, or foreground objects should block them. Interrupted rays look real.
Add a faint haze layer in a warm tone near the sun and a cooler one in the distance. That atmospheric perspective gives the sunlight depth, and it's what separates a flat glow from a lit space.
Step 6: Soften, then sharpen selectively
Once the layers are in place, release any Alpha Lock and apply Gaussian Blur to the light layers. Blur the transition on the Multiply layer a bit more than the glow, since the shadow edge is where harshness is most noticeable. Adjust back and forth until it looks right instead of committing to a fixed percentage.
Then bring back some crispness where it matters:
- Keep the edge nearest the sun sharper than the edge in the shadow.
- Add small, crisp highlights on the specular points: wet leaves, metal, eyes.
- Use a faint rim light on the shadow side, in the cool color, to separate the subject from the background.
Also paint some of the light color into the background. If only the subject is lit and the environment isn't, the lighting will feel pasted on.
Optional: Use Procreate's Lighting Studio for 3D references
If you're working with a 3D model in Procreate, Lighting Studio lets you place up to four light sources, adjust their hue, saturation, and intensity, and choose from 11 preset environments. It won't replace painted sunlight in a 2D illustration, but it's a quick way to check how light falls across a form before translating it into brushwork.
Common mistakes
- Light and shadow don't match. Highlights on one side and cast shadows pointing the same direction undermine the whole image.
- Everything is saturated. Reserve your strongest color for the transition zone and keep shadows more muted.
- Pure white highlights. Even the brightest area benefits from a slight warm or cool tint.
- Rays with hard edges. Real light shafts are soft and broken up by the scene.
- Flattened layers too early. Stay non-destructive as long as possible.
Taking painted sunlight into a motion pipeline
If you're a motion designer or VFX artist, a painted frame is often the beginning of a shot, not the end. A few practical habits help:
- Export layers deliberately. Save the base, light, and glow as separate PSDs or PNGs so you can animate intensity, color, or position in After Effects.
- Treat the sun glow as a plate. Bring the Add-mode layer into your comp with the matching blend mode and animate opacity for flicker or drift.
- Keep a lighting reference frame. A painted frame with clear direction and color temperature is a useful target for matching CG renders in Cinema 4D or Blender, or plates in Nuke.
Quick checklist
- Light direction, color temperature, and hardness decided first
- Darker base with a hint of light color in the background
- Multiply shadow layer, clipped, with light shapes erased out
- Orange, then yellow at the edge, then cool color on the opposite side
- Add or Color Dodge glow, built in light passes
- Rays on their own layer, blurred and interrupted by scene elements
- Blur the transitions, then sharpen the key edges
- Layers exported separately for animation and compositing
Once the layer structure is in place, you can push the sunlight warmer, cooler, harder, or softer without starting over, and that flexibility is what makes the painting useful in a larger production pipeline.