How to Paint Pine Trees in Procreate
StyleFrame Team7 min read
To paint pine trees in Procreate, block in a tall, narrow silhouette first, then build the branches as stacked, drooping tiers with a textured brush. Work from dark values to light, and keep the edges ragged rather than smooth. For many trees at once, make a custom brush from a simple needle-cluster stamp, then use spacing, scatter, and rotation settings to get natural variation.
Set Up the Canvas First
Start larger than you think you need. If the trees will end up in a composite, a canvas of 4000 px or more on the long edge gives you room to crop, reframe, and push in during a camera move without softening the paint texture.
Create a few layer groups before you paint anything:
- Sky or background gradient for the farthest atmosphere
- Far trees, mid trees, and near trees as separate groups
- Ground, snow, or fog on top or between groups, depending on your scene
Separating depth planes early costs a minute and saves a lot of time later. It also means each plane can move at its own speed if the illustration goes into an animation.
Understand What Makes a Pine Read as a Pine
Pines are easy to paint badly because artists draw them as green triangles. A few structural observations help:
- A strong central trunk. The trunk is often barely visible in dense species, but the vertical axis dictates the whole silhouette.
- Tiered, uneven branches. Branches sit in rough layers, hang down at the tips, and lift slightly at the ends. They are never perfectly symmetrical.
- Gaps. Sky shows through the foliage. These negative spaces are what stop a tree from looking like a cone.
- Clustered needles. Foliage grows in clumps rather than as a uniform surface, so your marks should group and overlap.
Spend a few minutes sketching silhouettes on a throwaway layer. Try a tall spruce, a wider, more irregular pine, and a wind-bent one. Pick the shapes you like and keep them as reference layers.
Method 1: Build a Custom Pine Brush
A custom brush is the fastest way to paint believable foliage across many trees. You do not need a downloaded brush pack.
Create the stamp
- On a small square canvas, paint a loose cluster of needles or a short, drooping branch in solid black on white. Include irregular gaps and a few stray strokes.
- Adjust the image if needed, inverting it so the stamp reads correctly. You can also invert it from within the brush's shape settings.
- Copy the image.
Load it into Brush Studio
- Duplicate a simple round brush so you do not overwrite a favorite.
- Open Brush Studio → Shape → Edit and import your stamp from the clipboard.
- Return to the brush's other settings and tune them as follows.
Settings that matter
- Spacing: Increase it so stamps are distinct instead of smearing into a solid bar. Lower spacing creates dense, continuous foliage. Higher spacing creates clumpy, broken texture.
- Scatter and Rotation: Add modest scatter and set rotation to randomize or follow the stroke, so the same stamp never repeats identically.
- Count jitter: A little variation prevents a mechanical rhythm.
- Size and opacity dynamics: Tie them to Apple Pencil pressure so you can build soft, feathered edges with light strokes and denser cores with firmer ones.
- Grain: An optional texture grain adds tooth that helps when you later add snow or frost.
Test the brush by stroking diagonal, downward-curving lines from the trunk outward. Painting in a drooping arc rather than a straight line is what gives you the characteristic pine branch.
Method 2: Paint by Hand With Layered Shapes
If you prefer a more illustrative look, you can avoid stamps altogether and use a textured brush like a dry bristle or chalk.
- Block the silhouette. On a dark green layer, paint the overall tree shape. Keep the outline jagged and uneven. Leave deliberate holes.
- Lock the layer. Turn on Alpha Lock so you can paint inside the shape without spilling out. Or add a clipping mask layer above it.
- Add mid-tones. Paint tiers of branches in a slightly lighter green, shaped like downward sweeping scallops. Let each tier overlap the one beneath it.
- Add light. On a clipped layer, place lighter, warmer strokes on the side facing your light source. Group strokes into clumps rather than covering every branch.
- Add shadow accents. Use a near-black green under each tier to separate them. This is the step that creates depth.
- Add a trunk and a few bare branches. Bring in some brown or gray at the base and where lower branches have died back.
- Break the edge. Use a small, rough brush or the eraser with a texture to add stray needles around the silhouette.
Choose Color and Light With Intent
Pure green straight from the color wheel tends to look artificial. Better options:
- Shift your greens. Use blue-leaning greens in shadow and yellow-leaning greens in light.
- Use a limited palette. Four to six values are enough per plane. Save them in a Procreate palette so every tree matches.
- Think in values first. Squint, or temporarily add a black-to-white Color Balance or desaturate adjustment layer, to check that your lights and darks read clearly.
- Add reflected light. A thin cool or warm edge, depending on your scene, makes trees feel lit by their environment.
For snowy scenes, paint snow as separate clumps resting on the upper surface of each tier, not as a coat over the entire tree. Keep the snow's shadow side slightly blue.
Build Depth Across a Forest
Once you have one convincing tree, you can multiply it in a controlled way:
- Far trees: Paint them as simple, flat silhouettes in a pale, desaturated blue-green. Skip internal detail.
- Mid trees: Add some tier structure and a light-side highlight.
- Near trees: Give these full detail, higher contrast, and the most texture.
- Atmosphere: Place a soft gradient or fog layer between each group. A low-opacity airbrush layer with a light color works well.
- Vary scale and spacing. Avoid evenly spaced rows. Overlap trees, cluster them, and let a few break the horizon line.
You can duplicate, flip, resize, and slightly warp a tree, but do it sparingly and repaint a few branches on each copy. Repetition is obvious to viewers at 4K.
Common Mistakes to Avoid
- Perfect symmetry. Real pines lean and have gaps. Rotate or distort slightly.
- Uniform stroke direction. Mix in strokes at different angles within a single tier.
- Overusing a single brush. Combine a stamp brush for foliage with a rougher brush for edges and a small hard brush for trunk details.
- No overlap between tiers. Without overlaps, the tree falls apart into floating pieces.
- Over-blending. Pine foliage is spiky. Smudging softens it too much.
Prepare the Artwork for Animation
If your pines are heading into a motion project, organize them for it from the start.
- Keep every depth plane on separate layers, including trunks, foliage, snow, and fog.
- Paint slightly beyond the visible frame so parallax moves or camera pushes do not reveal empty edges.
- Hide the background layer and export as PNG with transparency, or export a layered PSD. After Effects can import a layered PSD as a composition with layers preserved.
- Name layers clearly before export. Names like
pine_near_01andfog_midmake rigging in After Effects far less painful.
From there you can add parallax with a 2.5D camera, wind sway with Puppet Pin or Mesh Warp, and drifting fog with animated noise or turbulent displacement.
Where Styleframe Fits After the Painting
Painting the trees is the part you control by hand. Styleframe can help when you want to carry that painted look into moving footage without redrawing every frame.
Styleframe is an AI video and motion tool built around reference-driven control. You can use your Procreate pine painting as a style reference, or use start and end frames from your illustration, such as a wind-still tree and a wind-bent variant, as keyframes. Check Styleframe's current documentation for the specific features and export options available. The goal is to leave your compositing pipeline intact and add a controllable way to extend your hand-painted style.
Quick Workflow Recap
- Set up a large canvas with separate depth groups.
- Sketch a few asymmetrical silhouettes.
- Build a custom needle-cluster brush or use a textured brush.
- Paint dark base, then mid-tones, then light, then shadow accents.
- Use a limited, shifted green palette and check values.
- Create depth with scale, desaturation, and fog layers.
- Export clean, named layers for After Effects or send the painted references into Styleframe for motion.
With a handful of good brush settings and a clear value structure, pine trees become one of the quicker subjects to paint convincingly in Procreate. The same layered approach carries straight into an animation pipeline.