How to Paint Mountains in Procreate
StyleFrame Team7 min read
To paint mountains in Procreate, work from far to near on separate layers: paint a sky gradient, block in the farthest mountain silhouette in a pale, low-contrast color, then add each closer ridge darker, warmer, and with more detail. Shade each peak by choosing one light direction, painting the lit and shadow planes with a hard-edged brush, and softening only the transitions. Finish with mist between ridges, texture on the nearest range, and a foreground that anchors the scene. Keeping every depth plane on its own layer also lets you animate the painting later as a parallax scene.
Set Up the Canvas and Reference
Start with a canvas large enough to survive a video workflow. If the painting will end up in a timeline, match your delivery aspect ratio now. A 16:9 canvas avoids cropping later. The number of layers you can use depends on canvas size, so a very large canvas may give you fewer layers. Pick the largest size that still leaves you room for roughly 10 to 15 layers.
Use the Reference companion (Canvas > Reference) to keep a photo open while you paint. Study it for three things: where the light comes from, how value changes with distance, and where the ridgelines overlap. You are not copying the photo. You are borrowing its structure.
Create these layers up front and name them:
- Sky
- Far mountains
- Mid mountains
- Near mountains
- Mist (one or two layers)
- Foreground
- Color adjustments (top)
Naming matters if you plan to export a layered PSD for After Effects.
Build the Sky First
The sky sets the color temperature for everything below it. Pick two or three colors: a lighter, warmer tone near the horizon and a deeper, cooler one at the top. Paint them with a large soft airbrush and blend the transition with the Smudge tool or a low-opacity soft brush.
Keep the horizon glow brighter than any mountain. Distant peaks should look like they are dissolving into that light. If the sky and the farthest ridge have almost the same value, you are on the right track.
Block In the Mountain Silhouettes
Work in flat shapes before any detail.
- Select the Far mountains layer.
- Choose a hard-edged brush such as Studio Pen or a similar solid inking brush.
- Draw a jagged ridgeline, then fill it with Color Drop or by painting inward.
- Pick a color only slightly darker than the sky at the horizon, with a hint of blue or violet.
Repeat on the Mid mountains and Near mountains layers. Each range should be darker, more saturated, and more contrasty than the one behind it. This is atmospheric perspective, and it does most of the work of making flat shapes read as distance.
Vary the Ridgelines
Natural ridgelines are not zigzags. Mix long slopes with sudden steps, and avoid peaks of equal height or spacing. Tilt your main peak slightly off-center, and let a secondary peak overlap it. Overlap is one of the strongest depth cues you can draw.
Paint Light and Shadow on Each Peak
Pick one light direction and keep it for every mountain. Say the light comes from the upper left. Each peak then has a lit face on the left and a shadow face on the right.
Use a clipping mask so you never paint outside the silhouette:
- Add a new layer above a mountain layer.
- Tap the layer and choose Clipping Mask.
- Paint the shadow side with a darker, cooler color. Paint the lit side with a lighter, warmer color.
You can also lock the base layer with Alpha Lock, but clipping masks keep the shading editable and separate, which is better for revisions.
Paint the planes with a hard brush first. Then soften only where a plane turns gradually, such as rounded foothills. Crisp edges along ridgelines and folds are what make rock look like rock.
Add Ridges and Gullies
Within the shadow side, pull thin, angular strokes downward from the peak, following the direction the slope falls. These suggest ridges and gullies. Vary pressure and length. Resist the urge to draw every one, because suggestion reads better than inventory.
Add Snow and Highlights
Snow follows the same light logic as the rock. It sits on top-facing planes and catches the warmest light.
- Create a clipped layer above the near mountains.
- Paint snow on upward-facing surfaces and along ridge tops with a pale warm white, not pure white.
- Put a cooler, bluer tint in the snow's shadow areas.
- Break the snow edge with a textured brush so it dissolves into the rock instead of sitting like a cap.
Save your purest white for one or two small highlights. If everything is white, nothing has sparkle.
Create Mist and Depth Between Ranges
Mist is the fastest way to separate planes. On a new layer between two mountain ranges, use a large soft brush at low opacity with a color sampled from the sky near the horizon. Brush it across the base of the farther range, so its lower portion fades out.
Then:
- Use Gaussian Blur (Adjustments) on the mist layer for extra softness.
- Lower layer opacity until it feels subtle.
- Add a second, thinner band of mist in the valleys of the nearest range.
For clouds lingering on peaks, a soft brush plus the Smudge tool works. Smear in the direction the wind would move them.
Texture the Near Mountains
Detail belongs in the nearest range, because far ranges should stay quiet. Add texture on clipped layers using a chalky or dry-media brush. Stroke along the slope, not across it. Try a Multiply layer for darker crevices and an Overlay or Add layer for warm light hitting edges.
If you use Noise (Adjustments > Noise) at low values on the near layers, you get a subtle grain that helps the painting sit together. Keep it light. It should read as material, not as digital static.
Anchor the Scene With a Foreground
A foreground gives scale and a place for the eye to enter. Options include dark conifers, a lake edge, a rocky shoreline, or grass silhouettes. Keep the foreground the darkest and most saturated plane, or deliberately the lightest if you want a backlit mood.
Place a few silhouettes with strong shapes rather than many with detail. A single cluster of pines against a misty slope will do more than a forest painted tree by tree.
Unify With Color Adjustments
On the top of your stack, add a few adjustment tools:
- Curves to adjust contrast across the whole image or per channel.
- Color Balance to push shadows cooler and highlights warmer.
- Gradient Map, used at low opacity, to unify the palette.
Apply these to the group or to individual layers, not to flattened art. Then step back and check the painting in grayscale (for example, a Hue/Saturation pass with saturation pulled to zero on a duplicate). If the value order is wrong in grayscale, color will not fix it.
Common Mistakes When Painting Mountains
- Same value on every range. This flattens depth. Differentiate each layer.
- Too many peaks of similar size. Create hierarchy with one dominant mass.
- Inconsistent light. Check every shadow side against your chosen source.
- Soft brushes everywhere. Rock needs hard edges somewhere.
- Pure white and pure black. They flatten color. Tint your extremes.
- Detail in the distance. Save it for the foreground and near ranges.
Prepare the Painting for Motion
If this painting is headed for a video project, plan for it from the start.
Paint beyond the frame. For camera moves or parallax, extend each layer past the edges, so you do not reveal empty pixels when layers shift.
Keep planes separate. Export as a layered PSD (Share > PSD) so After Effects imports each layer. Check that your layer names, blend modes, and clipping mask results carried over correctly, since not every Procreate effect translates the same way.
Fill the gaps. Where a near mountain overlaps a far one, paint the hidden part of the far range so it can move independently.
Export a flattened PNG as a reference. You will want a locked comp to compare against.
In After Effects, place layers in 3D space, add a camera, and move it slowly. Animate the mist layers separately for drift. Then add subtle atmospheric depth with fractal noise or a light fog pass in your compositing stage.
Quick Workflow Recap
- Set canvas size and open a reference.
- Paint the sky gradient.
- Block in mountain silhouettes from far to near.
- Shade each peak with one consistent light source.
- Add snow and highlights on upward-facing planes.
- Layer mist between ranges.
- Texture the nearest mountains.
- Add a strong foreground.
- Unify with Curves, Color Balance, and Gradient Map.
- Export a layered PSD for animation.
Painting mountains is mostly a matter of managing value and edges across depth planes. Get that structure right and the brushes matter far less.