How to Paint Glitter Procreate
StyleFrame Team8 min read
To paint glitter in Procreate, build a scatter brush from a small shape source (such as Short Hair) with a Blank grain, then raise Spacing, Jitter, Scatter, Rotation, and maximum size. Paint dark and light passes over a mid-gray base and add colour with a clipped layer set to Color. Add sparkle highlights on a layer set to Add. The faster alternative is to clip a glitter photo to an empty layer and paint through it.
Below are the three main approaches, how to colour and light the result, and how to carry a painted glitter look into motion work in After Effects or Nuke.
Which Procreate glitter method should you use?
Pick the brush method if you want a reusable brush that needs no imported assets. Pick the photo method if you need a result in minutes.
Method 1: Build a custom glitter brush
This approach keeps everything inside Procreate, so there are no external textures to license or track.
Set up the brush
- Create a square canvas. Square works well for texture swatches you may reuse later.
- Open the Brush Library, create a new set (for example "Glitter"), then create a new brush inside it.
- Under Shape Source, swap in the Short Hair shape from the Pro Library.
- Under Grain Source, swap in the Blank grain so no paper texture interferes.
- Open Stroke and raise Spacing until the flecks separate. Around a third is a good starting point. Add modest Jitter, roughly 20%.
- Open Shape and add Scatter (around 15%) and Rotation (around 20%) so flakes point in different directions.
- Open General and raise the Max size limit well above 100%, since you want a wide variation in flake size. Nudge the Min up slightly (around 10%) so nothing disappears. Very large flakes turn blurry, so keep an eye on the top end.
- Rename the brush so you can find it later.
These numbers are starting points. Glitter density and flake size depend on your canvas resolution, so adjust to taste.
Paint the texture in layers
Real glitter has depth: dark flakes in shadow, bright flakes catching light. Reproduce that with separate passes.
- Fill the base. Flood the canvas with a medium gray. A slightly cool, desaturated gray works well and leaves room to push both darker and lighter.
- Dark pass. On a new layer, paint with a dark tone to establish the shadowed flakes.
- Light pass. On another layer, paint with a light tone so highlights sit between the dark flakes.
- Vary density. Build up more strokes in some areas and fewer in others. Even coverage looks like a flat pattern, not glitter.
Layer thickness and blend modes change the look noticeably. Try Overlay, Soft Light, or Add on the light pass and compare.
Colour the glitter
Keep the glitter grayscale and colour it non-destructively:
- Add a new layer above, paint a solid or gradient colour, and set its blend mode to Color.
- To get gold, silver, rose, or holographic variants, change the colour layer rather than repainting the flakes.
- Merge only when you are happy. Until then, you can swap colours freely.
Method 2: Paint through a clipped glitter photo
This is the quickest way to fill shapes, lettering, or illustrated objects with believable glitter.
- Place a blank layer above your artwork. This is your "paint here" layer.
- Import a glitter photograph onto the layer directly above it.
- Set the glitter layer as a Clipping Mask. The glitter will vanish at first, which is expected.
- Paint on the blank layer with any brush and any colour. The glitter appears wherever you paint, because the clipped layer only shows where the layer beneath it has pixels.
Text works the same way: clip the glitter to a text layer for glitter lettering.
Recolour the photo
- Use Adjustments → Hue, Saturation, Brightness. Shift hue for new colours, or pull saturation to zero for silver.
- Alternatively, paint colour on a layer above and set it to Color blend mode.
Make sure you have the right to use any glitter image. Free stock sites such as Unsplash and Pixabay are common sources, but check each licence for your use case, especially for client work.
Method 3: Noise-based sparkle
A third approach uses Procreate's noise tools to generate fine, grainy sparkle. It suits subtle shimmer on fabric, makeup, or dust more than chunky craft glitter.
- Add a noise effect on a dedicated layer, then restrict it to the areas you want using Procreate's Apple Pencil-based adjustment mode so you only affect the parts you paint.
- Increase contrast on the result so only the brightest specks survive.
- Blend the layer with Add or Screen.
Results vary by device and version, so treat this as a technique to experiment with, not a fixed recipe.
Add sparkle and glow
Flat glitter looks like a texture. Highlights make it look like it is catching light.
- Create a new layer above the glitter and set it to Add.
- Choose white, then paint with brushes from the native Luminance set (Flare and Lightpen are useful) to place bright flashes on a few flakes.
- Keep highlights sparse. Dozens of equal-sized flares read as noise; a handful of larger ones read as light.
- Duplicate the sparkle layer, blur it, and set it to Add for a soft bloom. Procreate's Bloom effect also works here.
For glowing lettering, add a coloured glow layer beneath the glitter layer and keep the brightest sparkles on top.
Common mistakes
- Painting everything at one scale. Mix large and small flakes.
- Colouring directly on the flakes. You lose the ability to change the colour later.
- Overdoing highlights. Reserve brightest points for a few flakes.
- Ignoring output. Glitter is a screen effect. It tends to print poorly, so judge it on a display.
- Working too small. If this will be used in video, paint at or above your delivery resolution so large flakes do not soften.
Taking Procreate glitter into motion
Procreate gives you a still. Glitter only feels real when it twinkles, so most motion artists need to move the look into a compositing pipeline.
Export for compositing
- Keep glitter, colour, and sparkle on separate layers. Export a layered PSD or individual PNGs with transparency so you can rebuild them in After Effects, Nuke, or Photopea-style tools.
- Export the grayscale glitter texture separately from the colour layer. In After Effects you can then use the texture as a luma matte, a displacement source, or a track matte for sparkle.
- Export at the largest practical size to leave room for scale animation.
Animate in After Effects
Common ways to bring glitter to life:
- Animate the Evolution of a Fractal or Turbulent Noise layer used as a luma matte over the glitter, so different flakes flash over time.
- Slide or rotate the glitter texture slowly under a mask to suggest a moving light source.
- Add glow and star effects on the highlight layer, driven by expressions like
wiggle()on opacity for irregular twinkle. - Parent the texture to a layer that follows your shape, then use a track matte to confine the effect.
The same breakdown translates to Nuke: use noise as a matte, grade the glitter through it, and add glow in the comp.
Where Styleframe fits
Styleframe is an AI video and motion tool built for artists who want control over the output. If you have painted a glitter look in Procreate and want it to move or carry across other material, it can help in a few practical places:
- Frames-to-Video: Use keyframes as anchors. For example, give it a "dull" frame and a "fully sparkling" frame from your Procreate painting, and let it generate the transition between them. Every generation is driven by your reference images and keyframes, so the result stays close to what you painted.
- Restyle and Ink-and-Paint: These are reference-driven style transfers. Use your glitter painting as the reference to restyle footage or 3D renders so they pick up your look, rather than prompting for a generic "sparkly" effect.
- 2D-to-3D and Turntable: Turn a glitter-covered illustration into a 3D asset and generate a turntable to check how the surface reads from different angles.
- Remove Background and 4K Upscale: Isolate the painted element for compositing, and push the final result to 4K for delivery.
Iteration is non-destructive, so you can try several versions without overwriting earlier ones. Because Styleframe exports image sequences, the output drops straight into a standard After Effects or Nuke comp, where you can still add your own noise-driven twinkle, glow, and grade. An After Effects plugin is on the way, but today the image-sequence workflow keeps your compositing setup intact.
It does not replace painting or compositing. Procreate gives you the hand-made look, and After Effects or Nuke gives you the final control. Styleframe sits between them when you need generated motion or style transfer guided by your own artwork.
Quick checklist
- Choose a method: custom brush, clipped photo, or noise.
- Keep glitter grayscale and colour it on a separate layer.
- Mix flake sizes and vary density.
- Add sparse Add-mode highlights and a soft bloom.
- Export layers separately at high resolution.
- Animate twinkle in After Effects or Nuke, or generate motion between painted keyframes with Styleframe and bring the sequence into your comp.
Start with the brush method to learn how glitter behaves, then use the clipped-photo method when you need speed. Either way, separating texture, colour, and light keeps your options open for the motion stage.