How to Paint Eyelashes in Procreate
StyleFrame Team8 min read
To paint eyelashes in Procreate, sketch the lash line on its own layer, then flick tapered, curved strokes outward from the lid with a pressure-sensitive pen or pencil brush. Start with short, lightly curved lashes at the inner corner and build to longer, more curved ones at the outer corner. Vary the length and angle of each stroke, then add a second layer of lashes, darker roots, and a few subtle highlights. You don't need a special eyelash brush: a default inking or pencil brush with a tapered stroke works.
Why lashes matter for motion and animation work
If you animate characters, build style frames, or design illustrated assets for compositing, the lashes are often the last thing you paint and the first thing a viewer notices when they look wrong. Stiff, uniform lashes make an eye look like clip art. Overly heavy ones make a character look tired or aggressive.
Procreate suits this job because it gives you pressure-sensitive, hand-drawn strokes on an iPad. Painting lashes there, on clean, separate layers, also gives you something useful to take into After Effects, where you can rig, blink, or parallax them.
Step 1: Set up the canvas and layers
Before you paint a single lash, decide how the artwork will be used. For a static illustration, a normal layer stack is enough. For animation, plan the layers now so you don't have to cut them apart later.
- Canvas size: Work larger than you think you need. Lashes are fine detail, and you'll likely scale the eye up in a close-up. A high-resolution canvas leaves room to crop and push in on the comp.
- Layer structure: Make separate layers for the eyeball, iris, upper lid, upper lashes, lower lashes, and any shadow cast on the lid. If the character will blink, the upper lashes should sit on a layer that can move with the lid.
- Sketch layer: Keep a low-opacity sketch of the eye shape underneath and lower its visibility as you finalize the lines.
Step 2: Choose a brush and tune it
Some Procreate artists say you don't need a dedicated eyelash brush. A good inking or pencil brush with a tapered stroke will do the same job, and you already own it. Dedicated lash brushes can speed up stamping of repeating shapes, but they also tend to produce the uniform, repetitive look you're trying to avoid.
Good starting points from the default library:
- A pencil brush for a soft, slightly textured stroke.
- An inking brush for crisp, clean lashes in a graphic or cel-shaded style.
- A round painterly brush for lashes that sit inside a more painted portrait.
Then adjust the brush in the Brush Studio:
- Size: Keep it small. Lashes are thin, and you can scale the brush down further for lower lashes.
- Pressure response: Open the Apple Pencil settings and check that pressure affects size and opacity. The taper at the end of each lash comes from lifting the pencil as you flick.
- StreamLine or stabilization: Raise it a little. Lashes are single curved strokes, and a bit of smoothing keeps the curve from wobbling. Too much will lag and make the stroke feel dead.
- Opacity: Medium opacity lets overlapping lashes build up naturally.
Step 3: Establish the lash line
Lashes grow from the edge of the lid, not from a line floating above it. Mark the contour of the upper and lower lids on a sketch layer first.
Pay attention to the lid's thickness. A thin, dark line along the base of the upper lashes (a lash-line shadow) anchors everything and reads as the lashes' root density. Paint that line first, tapering it at the inner corner and thickening it toward the outer corner for most eye shapes.
Step 4: Paint the upper lashes
Upper lashes are where most of the character lives, so spend time here.
Start at the inner corner
Inner lashes are short and grow nearly straight out from the lid, with only a slight curve. Use short, quick flicks.
Lengthen and curve toward the outer corner
As you move outward, make each lash a little longer and give it more curve. The strongest curve tends to sit toward the outer third of the eye, and the longest lashes often sit just before the outer corner.
Flick from the root outward
Put the pencil down at the lid and flick away from it, lifting as you go. Drawing from the tip toward the root gives a blunt, uniform end. A fast flick gives a natural taper. If a lash looks wrong, undo it and redraw it rather than correcting it.
Break up the pattern
Natural lashes aren't evenly spaced or parallel. Do these things deliberately:
- Vary the angle slightly from lash to lash.
- Let some lashes cross or clump with a neighbor.
- Leave small gaps.
- Keep a few shorter lashes tucked between longer ones.
Add a second layer
Create a new layer above the first and paint a smaller set of lashes that overlap and fill gaps, especially toward the outer corner. This is what gives volume. Keeping it on its own layer lets you lower its opacity or move it if the result is too heavy.
Step 5: Paint the lower lashes
Lower lashes are shorter, finer, and sparser. They also tend to curve less, and they often point slightly downward and outward.
- Reduce brush size or pressure.
- Use short, light strokes.
- Space them more evenly than the upper lashes, but still vary the length.
- Group a few into small clusters rather than painting a full row.
Overpainting the lower lashes is a common mistake. A light touch makes the eye look natural, and heavy lower lashes read as a stylistic choice, which is fine if that's intended.
Step 6: Add depth with color, shadow, and highlight
Pure black lashes on a skin tone usually look flat. Choose a very dark brown, blue-gray, or a deep shade of the surrounding skin color.
- Darken the roots. On a new clipping-mask layer above the lashes, paint a slightly darker shade near the lid. Roots are denser, so they read darker and thicker.
- Lighten the tips. Lashes often catch light at the ends. Use a small brush and a lighter or warmer tone to add a few tip highlights on selected lashes only.
- Paint a cast shadow. Add a soft shadow on the eyelid or eyeball below the upper lashes on a Multiply layer. This sells the lashes as a three-dimensional object.
- Add reflected color. A subtle hint of skin or environment color on the lashes ties them to the lighting of the scene.
Use Alpha Lock or clipping masks for color changes so you never have to repaint the strokes.
Step 7: Refine and check at multiple scales
Zoom out to the size the artwork will actually appear. Lashes that look great at 400% zoom can turn into a smudge at a normal viewing size, and the reverse is also true.
- Flip the canvas horizontally to catch asymmetries and awkward curves.
- Check the lashes against the rest of the face. Do they match the line weight of the brows and lips?
- Add a couple of stray lashes outside the main group. Use these sparingly.
- Erase any lashes that cross the iris in ways that look unnatural, unless the lids are partly closed.
Step 8: Prepare the artwork for After Effects or other tools
If the artwork is headed to a compositing or animation pipeline, a little housekeeping in Procreate saves time later.
- Name and group layers. Export a layered file your animation software can open. Clear names like "upper_lashes_front" and "lower_lashes" make rigging in After Effects much easier.
- Hide the sketch layers and any helper guides before exporting.
- Export transparent PNGs for individual elements if you don't want to bring in the whole layered file.
- Keep the lashes separate from the lid and eye so you can animate a blink by rotating or scaling the lid and lashes together while the eyeball stays put.
- Test a blink early. Move the upper-lid layer in After Effects to confirm the lashes don't leave gaps or reveal unfinished areas.
In Cinema 4D or Blender, the same layered file can serve as a texture or a camera-projected card on a stylized character.
Common mistakes to avoid
- Painting lashes as a uniform fringe. Vary length, spacing, and angle.
- Starting strokes at the tip. Flick outward from the root for a natural taper.
- Using pure black everywhere. Pick a dark, slightly tinted color.
- Merging everything to one layer. You lose the ability to adjust the lashes or animate them.
- Overworking the lower lashes. Keep them light unless the style calls for more.
- Skipping the cast shadow. Without it, lashes can look pasted on.
Final checklist
- Lash line established and anchored on the lid
- Upper lashes short at the inner corner, longer and more curved outward
- Second layer of lashes for volume
- Lower lashes lighter and sparser
- Roots darkened, tips highlighted, shadow cast
- Layers named and separated for export
- Reviewed at the final display size
Paint lashes with confident flicks, keep them on separate layers, and treat the Procreate file as a production asset rather than a finished image. That approach gives you clean lashes now and flexibility whenever the eye has to blink, turn, or carry a style across a shot.