How to Paint and Fill in Procreate 4.2
StyleFrame Team8 min read
To paint in Procreate 4.2, pick a brush, set size and opacity, and work on separate layers. To fill, drag the color disc from the top right onto the area you want filled (ColorDrop). For more control, use Selections with Color Fill turned on, or fill a whole layer from the Layer Options menu. Procreate has no traditional bucket tool, so fills work through routes like these.
What Procreate 4.2 Adds for Painting and Filling
Procreate 4.2 launched in November 2018 with QuickShape, Crop and Resize, Clipping Masks, rebuilt stroke taper controls, a new artwork preview, and Liquify Dynamics. Several of these directly affect how you paint and fill. Clipping Masks let you keep color inside a shape without manual selections. QuickShape cleans up geometric forms. Taper and pressure-curve controls shape every stroke.
One caution: Procreate's current Help Center documents newer behavior, such as Continue Filling mode and live threshold adjustment. Depending on your exact build, some of those conveniences may be missing or behave differently. The core methods below (ColorDrop, selection-based fill, and layer fill) are the reliable foundation. If a gesture doesn't respond, check your version before assuming you're doing it wrong.
Set Up the Canvas Before You Paint
Motion work usually starts with a known delivery size, so set your canvas to match it. Procreate 4.2 also lets you change your mind later. Open the Actions menu, go to Canvas, and choose Crop and Resize. You can drag the edges, type exact dimensions, lock the aspect ratio, and choose whether to resample.
Memory is the main constraint. The more layers a document has, the smaller the maximum canvas becomes, because more layers take more memory on the iPad. If you can't enlarge the canvas as far as you need, merge or delete layers you no longer need and try again. For animation backgrounds or plates you plan to push around in After Effects, decide on the final dimensions early. Enlarging a finished painting means resampling, and resampling softens detail.
How to Paint in Procreate 4.2
Choose a Brush and Set Size and Opacity
Select a brush from the Brush Library, then use the size and opacity sliders to set them. Keep your sketch, flats, shading, and highlights on separate layers. Layer discipline pays off later when you need to isolate elements for compositing.
Tune Taper and Pressure
Procreate 4.2 rebuilt stroke handling so you can control how size, opacity, and pressure taper at the start and end of a stroke. Pressure curves for size and opacity are built into each brush. If you do line work, or art destined for a 2D animation pipeline where clean stroke endings matter, spend time here. Consistent line quality across many frames is far easier to maintain when your brush behaves predictably.
Use QuickShape for Clean Geometry
Draw the shape you want with any brush and hold at the end of the stroke. Procreate snaps it to a precise shape. That's useful for UI elements, mechanical designs, and graphic backgrounds. Because it works with whichever brush is active, you don't need to switch tools or dive into menus.
Undo and Redo
A two-finger tap undoes and a three-finger tap redoes, the same as when painting normally. This also works while you're making selections.
How to Fill in Procreate 4.2
Method 1: ColorDrop
ColorDrop is the fastest fill method.
- Pick your color from the Colors icon in the top right.
- Drag the color disc from that corner onto the area you want to fill.
- Release to commit the fill.
On builds that support it, keep holding after you drop the color and slide left or right to adjust the threshold. A lower threshold fills less, and a higher one fills more. This matters at soft or anti-aliased edges, where a fill can leave a thin halo of the old color.
ColorDrop uses Procreate's own algorithm to decide where the boundaries are. If your line art has gaps, the color can leak into neighboring areas. Close the gaps, or use a selection-based method instead.
On newer builds, tapping Continue Filling after a ColorDrop lets you tap other regions to fill them with the same color. Tap the tick or switch to another tool to exit that mode.
Method 2: Recolor via QuickMenu
Recolor is an alternative to ColorDrop that sits in the QuickMenu, which is off by default. To enable it, go to Actions → Prefs → Gesture Controls → QuickMenu and toggle on your preferred way of invoking it. Then assign Recolor to one of the radial options.
To use it, enter Recolor mode, choose your color, and tap the areas to fill. A Flood slider controls how aggressively the fill spreads. Availability depends on your version, so if the option is missing in your build, use ColorDrop or selections.
Method 3: Color Fill with Selections
This is the most controllable method, and the one to use when edges matter.
- Tap Selections at the top.
- Choose a method from the bottom tabs: Automatic, Freehand, Rectangle, or Ellipse.
- Tap Color Fill so it is highlighted blue.
- Pick your color.
- Make the selection. The color fills the selected area as soon as you finish.
Automatic selection works from a tap, and sliding left or right without lifting adjusts the threshold. Freehand lets you combine curved and straight segments. Rectangle and Ellipse are good for geometric fills, and Feather softens the edges if you want a vignette or gentle frame around the artwork.
The Color Fill setting persists after you leave Selections, so turn it off when you're done. Otherwise your next selection will fill unexpectedly. Color Fill also works on a single layer only, not on a group of layers.
If the shaded selection overlay is too faint or too heavy to read, adjust it under Actions → Prefs → Selection Mask Visibility.
Method 4: Fill an Entire Layer
To flood a whole layer with a solid color, choose your color, open the Layers panel, and tap the target layer (a second tap opens its options). Choose Fill Layer from the menu. This is the quick way to create flat background layers or solid matte layers.
Keep Paint Inside Shapes with Clipping Masks
Clipping Masks are one of the most useful additions in 4.2 for painting. Instead of selecting a shape, inverting, and deleting, you place a new layer above the base layer, tap it, and choose Clipping Mask. The upper layer then shows only where the layer beneath has content. You can clip multiple layers to the same base.
A practical pattern: fill a flat silhouette on the base layer, then clip shading, texture, and highlight layers above it. You can repaint those layers freely without worrying about overspill. If you later change the base color or shape, the clipped detail follows it.
Troubleshooting Fills
- Color leaks across the canvas: The line art has a gap. Close it with a brush stroke, or use a Freehand selection.
- A light fringe remains around the fill: Raise the threshold on ColorDrop, or make the selection slightly wider and fill again.
- Color Fill won't work on a group: Select a single layer inside the group.
- Fills keep happening when you try to select: Color Fill is still toggled on. Turn it off in Selections.
- Can't enlarge the canvas: Reduce your layer count, then retry Crop and Resize.
Prepare Procreate Artwork for After Effects
If the painting is headed into a motion pipeline, treat Procreate as a layer-based source. Keep elements on separate, clearly named layers. Export a layered PSD so your layers stay separate, and check how your compositing app imports it. For single frames or sequences, export PNGs at your final delivery resolution. Check your canvas size before you export, because enlarging later means resampling.
Keep a flattened reference version too. It's useful when you need a clean still for review, a style reference, or a key pose.
Where Styleframe Fits After Procreate
Procreate is good at making the hand-painted frame. Turning one painted frame into motion is a different job, and that's where a tool like Styleframe can come in after Procreate. It doesn't replace your painting. It extends it. You keep your compositing workflow, and the hand-painted look stays under your control.
A Quick Workflow Recap
- Set the canvas to your delivery size with Crop and Resize if needed.
- Block in shapes with a brush and QuickShape, one element per layer.
- Fill with ColorDrop for speed, or Selections with Color Fill for clean edges.
- Use Fill Layer for flat backgrounds and mattes.
- Clip shading and texture layers to the flats with Clipping Masks.
- Export a layered PSD and PNG stills, then bring them into After Effects or into a tool like Styleframe.
Master ColorDrop, selection-based fills, and clipping masks, and you'll cover nearly every painting and fill task in Procreate 4.2 without a bucket tool.