How to Outline Stickers in Procreate
StyleFrame Team8 min read
To outline a sticker in Procreate, duplicate your artwork layer, fill the lower copy with a solid color, and apply a Gaussian Blur to it. Then use the Selection tool in Automatic mode to select the blurred edge, invert the selection, and fill it to create a clean border. Procreate has no one-tap sticker outline command, so this blur-and-select workflow is a quick, widely used method. A monoline brush pass over the result smooths the edge for printing or cutting.
What You Need Before You Start
- Procreate on iPad. Procreate is an iPad app, so this workflow assumes that. An Apple Pencil helps with the sliding gestures, though a finger works.
- Artwork on a single layer. If your sticker sheet is spread across many layers, merge them first. Duplicate the project in the Gallery before merging so your editable original stays intact.
- A transparent background. Hide or delete the background layer so the outline is built only from your artwork's alpha.
If you're starting from an imported PNG, make sure it has real transparency. A flattened JPEG will give you an outline around the whole canvas rather than around the subject.
The Core Method: Blur, Select, Fill
This is a common approach in Procreate tutorials. It works because blurring a solid silhouette expands its soft edge outward, and the Selection tool can then convert that soft edge into a hard-edged shape.
Step 1: Duplicate the artwork layer
Swipe left on your sticker layer and tap Duplicate. You now have two identical layers. Keep the original on top and work on the copy underneath. Working on a copy means you never degrade your original artwork.
Step 2: Turn the bottom copy into a solid silhouette
You want the lower layer to become a flat shape in your outline color, usually white. There are two common ways:
- Alpha Lock and fill. Select the bottom layer, turn on Alpha Lock (swipe right on the layer with two fingers), choose your outline color, tap the layer, and choose Fill Layer. Turn Alpha Lock off afterward.
- Hue/Saturation/Brightness. Open Adjustments, choose Hue, Saturation, Brightness, push brightness to 100% and saturation to 0%. The layer becomes pure white while keeping its alpha shape.
Either works. Alpha Lock is better when you want a colored outline, while the adjustment route is quick for the standard white die-cut look.
Step 3: Apply Gaussian Blur
With the silhouette layer selected, open Adjustments and choose Gaussian Blur. Slide your pencil to the right across the canvas to increase the blur. Most tutorials land somewhere between roughly 10% and 25%, depending on how thick a border you want and how detailed your artwork is.
Blur until the soft halo fully covers the gaps and small concavities in your design, such as the space between letters or between a character's arm and body. If the blur is too weak, those gaps stay open in the final outline.
Step 4: Select the blurred edge
Open the Selection tool and set it to Automatic. Tap the empty area outside the blurred shape and keep your pencil down. Slide left or right to change the selection threshold. As you drag, the selection boundary moves in or out, which controls the final outline thickness.
At a threshold near zero, everything outside the shape is selected and the blurred area stays unselected. Nudge the threshold until the selection edge sits where you want the border.
Step 5: Invert and fill
Tap Invert so the selection covers the shape and its border rather than the outside. Then, with the outline layer active, tap Fill Layer (or Color Fill at the bottom of the screen, with your outline color active). You now have a solid, hard-edged outline layer beneath your artwork.
A useful shortcut: if Color Fill is enabled with white as your active color when you invert, the fill happens in one move and you can skip the separate Fill Layer step.
Step 6: Check for gaps
Zoom in and inspect the outline. Look for tiny unfilled pinholes, especially inside tight counters or where thin strokes meet. Fix them with a hard brush in the outline color directly on the outline layer.
Smoothing the Outline for Print and Cutting
The blur-and-select technique produces slightly bumpy edges. Zoomed out, you won't notice. For a vinyl cutter or a clean print die-line, you will.
To tidy it up:
- Pick a hard-edged monoline brush. The Monoline brush in Procreate's Calligraphy set is a common choice.
- Match the outline's exact color.
- Trace slowly around the border, rounding off bumps and straightening wobbles.
Because the blur method follows your artwork's edge, results vary with brush softness and opacity. Soft or semi-transparent brushes produce less predictable borders than hard, fully opaque ones. The practical answer is a hybrid: let the blur method do most of the work, then hand-correct the problem areas.
Adjusting Thickness and Style
Outline thickness is controlled in two places, and understanding both saves time:
- Blur amount sets how far the soft halo extends and how well it bridges gaps.
- Selection threshold sets where along that halo the hard edge lands.
If a border looks too thin, you can often fix it by dragging the threshold, with no need to redo the blur. If it's too thin and gaps are showing, go back and increase the blur.
For a colored or double outline, repeat the process. Duplicate your outline layer, enlarge it with a bigger blur, and fill it with a second color beneath the first. A thin white border inside a thicker black one is a classic sticker look.
Exporting Stickers from Procreate
Once the outline layer sits beneath your artwork:
- Hide any background layers.
- Export as PNG to preserve transparency.
- If you need the sticker and outline as separate assets, export with each layer toggled individually, or export the project as a layered file such as PSD.
For cutting machines, many makers also export an outline-only silhouette to generate a cut path in their cutting software. Keep that outline layer clean and solid, since smooth edges convert into smoother cut paths.
Common Problems and Fixes
The outline has holes or skips areas. The blur was too low to bridge small gaps. Increase the Gaussian Blur, then reselect.
The selection grabs the whole canvas. The Automatic selection threshold is too high. Keep your pencil down after tapping and slide it back toward zero.
The border looks jagged when zoomed in. That's a natural artifact of threshold-based selection. Trace over it with a monoline brush.
The outline is lopsided. Your source art may have semi-transparent or soft-edged pixels. Clean the edges of the original artwork, or use a harder brush when drawing the sticker.
The outline color has a faint fringe. Make sure the outline layer is filled with a fully opaque color and that no leftover soft pixels remain from the blur.
Taking Procreate Stickers Into a Motion Pipeline
If you're a motion designer or video editor, sticker artwork often doesn't end in Procreate. A hand-drawn sticker set can become animated overlays, social stingers, lower-thirds, or title elements. The workflow from here is simple:
- Export each sticker as a transparent PNG at the highest canvas resolution you can reasonably make. Starting large helps if you plan to scale in motion.
- Import the PNGs into After Effects, Premiere Pro, or Nuke and treat each as a layer with built-in alpha.
- If you need to change border thickness later without going back to the iPad, After Effects' Stroke layer style or an alpha-based stroke effect can add borders non-destructively to transparent layers. Procreate's hand-built outline remains the better choice when you want a specific, hand-corrected die-cut shape.
Where Styleframe fits
Once stickers are drawn and outlined, the harder question is often how to animate or extend them in a consistent style. Styleframe is an AI video and motion tool built for artists who want control rather than a one-click black box. Every generation is driven by reference images, video clips, and keyframes that you supply.
A few practical ways it can relate to a sticker pack:
- Frames-to-Video: Set keyframes from your sticker artwork and generate motion between them, rather than describing the motion in a text prompt.
- Restyle and Ink-and-Paint: Use your illustrated sticker as a style reference so footage or other assets pick up your linework and color treatment.
- Remove Background: Isolate a subject from footage so it can sit in the same sticker-style composition.
- 2D-to-3D and Turntable: Explore a flat character as a rotating or dimensional asset when a project calls for it.
- 4K Upscale: Bring lower-resolution results up to 4K for delivery.
Iteration is non-destructive, so you can try variations without overwriting earlier outputs. Output is production-ready 4K, and Styleframe exports image sequences, so the results drop straight into your existing compositing setup. It works alongside After Effects and Nuke, and an After Effects plugin is on the way. You keep your compositing workflow, and Styleframe handles the generative step you direct with your own references.
Styleframe doesn't replace the Procreate outline workflow. The hand-built, cut-ready border still comes from Procreate. Styleframe is for what happens after the art exists and you need it to move.
Quick Reference: The Procreate Sticker Outline Workflow
- Merge artwork onto one layer, hide the background.
- Duplicate the layer.
- Fill the bottom copy with a solid color via Alpha Lock or Hue/Saturation/Brightness.
- Apply Gaussian Blur (about 10–25%, depending on design).
- Use Selection in Automatic mode, tap outside the shape, and slide to set the threshold.
- Invert, then fill.
- Patch gaps and smooth the edge with a monoline brush.
- Export as a transparent PNG.
Once you've done it a few times, the process goes quickly. The main judgment calls are how much blur to apply and when to hand-correct. Get those right, and you'll have clean, consistent sticker borders ready for print, cutting, or animation.