How to Name Procreate Files
StyleFrame Team8 min read
To name a Procreate file, open the Gallery and tap "Untitled Artwork" under the thumbnail, type a new name, and confirm. You can also open the canvas, tap the wrench, choose Canvas, then Canvas Information, and tap the name at the top. Stacks are renamed the same way, by tapping the stack's name in the Gallery. Procreate has no naming prompt when you create a canvas, so a consistent convention you apply right away is what keeps files manageable once they reach After Effects, Premiere Pro, or Nuke.
Two Ways to Rename a Procreate File
Procreate gives every new canvas the placeholder "Untitled Artwork," and nothing forces you to change it. Both methods below are quick, and neither changes the artwork itself.
Rename from the Gallery
- Open the Procreate Gallery.
- Find the thumbnail and tap the small text underneath it that says "Untitled Artwork" (or the current name).
- The keyboard opens with the name editable. Type the new name and confirm.
Tap the text, not the thumbnail. Tapping the image opens the canvas, which is the most common mistake here. This route is best when you have a backlog of unnamed pieces, because you can rename a dozen of them in one pass without opening any.
Rename from Canvas Information
- With the canvas open, tap the wrench icon to open the Actions menu.
- Go to the Canvas tab and tap Canvas Information.
- Tap the name at the top of the panel and type the new one.
This is the better route at the start of a session. While you're in that panel you can also check settings such as DPI, so setting up a new file and naming it become one habit.
Rename a Stack
Stacks are Procreate's folders. Tap the stack's name in the Gallery and type a new one. Once you have more than a handful of files, stacks are the closest thing Procreate offers to a project folder. Use one stack per project or per shot sequence.
If Renaming Doesn't Work
The most common complaint is that tapping the name does nothing, flashes the rename screen for a moment, or freezes. A few fixes, roughly in order of likelihood:
- Hardware keyboard conflict. A Bluetooth or Apple keyboard attached to the iPad has been a known cause of the rename field closing itself. Detach it and rename with the on-screen keyboard.
- Keyboard Shortcuts setting. If you want to keep the keyboard attached, go to iPad Settings > General > Keyboard and toggle the Shortcuts option, then try again.
- Restart. Close Procreate and other background apps, then restart the iPad.
- Check versions. If the problem persists, note your iPad model, iPadOS version, and Procreate version before contacting support or posting in the Procreate forums. Those are the first things they'll ask for.
Back up before you try anything drastic. Reinstalling Procreate is a last resort, and you should export your canvases as .procreate files, plus custom brushes and palettes, before you consider it.
What Procreate Naming Does and Doesn't Do
Knowing the limits helps you plan around them.
- No name at creation. You can't name a canvas when you create it, so rename immediately or the Gallery fills with "Untitled Artwork."
- Duplicates share a name. Duplicating a canvas to save a version doesn't create a clean, incremented name. You end up with several identically labeled thumbnails, so rename each duplicate the moment you make it.
- No metadata fields. Procreate has no built-in author, tags, or notes field for a canvas. A PSD exported from Procreate won't carry a title or author in the way you might expect from a desktop app. The file name is effectively your only label.
- One flat Gallery plus stacks. Organization is the file name and the stack. That's all.
Because of these limits, the name you type is doing all the work. A scheme that survives the trip from iPad to a desktop pipeline is worth setting up once.
A Naming Convention That Survives a Pipeline
Procreate files often end up as reference, textures, storyboards, or hand-drawn elements inside a larger project. Once they leave the iPad, they're subject to the same rules as every other asset on your server. A few principles carry over:
Lead with the project, then the specifics. A pattern like project_scene_element_version sorts predictably in Finder, Explorer, After Effects' Project panel, and Premiere's bins. Example: neon-city_sc02_signage-sketch_v03.
Avoid spaces and special characters. Scripts, render managers, and some cloud sync tools don't always handle them well. Use hyphens or underscores consistently.
Use zero-padded version numbers. v03 sorts correctly; v3 and v10 don't. Don't rely on "final" or "final_final" for anything you'll hand off.
Put the version at the end, not in the middle. It keeps all iterations of one asset grouped together alphabetically.
Keep names short enough to read in the Gallery. The name under each thumbnail is small, so put the distinguishing part early. If every file begins with the same long project name, you can't tell them apart at a glance. A short project code (NC for Neon City) helps.
Match your team's existing convention. If your studio already has a pattern for shots and elements, use it in Procreate too. Retyping names on a desktop later is where errors creep in.
Name Layers Too
Layer names matter as much as file names if you're exporting a layered PSD into After Effects or a compositor. Descriptive layer names such as line_art, color_flat, shadow_mult, and bg_paper mean you can import the PSD and know what everything is without opening each layer. "Layer 14" will cost you time on every handoff.
Think About Sequences
If you're animating and exporting frames as an image sequence, name the canvas for the sequence before exporting, and check how the files are named and how the frame numbers are padded once they land on your desktop. After Effects, Premiere Pro, Nuke, and Blender all need sequence files to be consistently numbered to import them as a single clip, and a missing or inconsistent prefix is how you end up with a sequence that won't import as one.
Renaming at the Export Step
Whatever you type in the Gallery becomes the default name when you share or export. That means renaming before you export is the cheapest point to fix things. If a file has already gone to iCloud Drive, Dropbox, or AirDrop with a bad name, you'll have to rename it again in the Files app or on the desktop, and any links or references to the old name break.
A good habit is to treat the Gallery name as the final delivered name. Check it, then export. For the export format itself, Procreate can export a .procreate file, a PSD, or a PNG, so choose based on where the file is going next.
Using Named Procreate Art in AI-Assisted Motion Work
Procreate sketches, textures, and painted frames often become the starting point for motion work. A clear naming scheme matters more once AI tools enter the pipeline, because each generation has inputs you'll want to trace back later.
If the tool you use is driven by reference images, video clips, and keyframes that you supply, a scheme like neon-city_sc02_keyframe-a_v03 makes it obvious which painting produced which result. Carry your naming scheme through: if the Procreate keyframe is v03, the sequence you export should reference that version in its folder or file name, so the whole chain from sketch to comp is traceable.
A Quick Checklist
- Rename the canvas as soon as you create it, from Canvas Information.
- Use a convention: project, scene, element, version, with no spaces and zero-padded numbers.
- Rename duplicates immediately.
- Group files into stacks by project or sequence.
- Name layers before exporting a PSD.
- Check the name before export, since that's what travels with the file.
- If rename fails, detach the hardware keyboard or toggle the Keyboard Shortcuts setting, then restart.
Frequently Asked Questions
Can I rename a Procreate file after exporting it? Yes, but only the exported copy. Renaming it in the Files app or on your desktop won't change the name in the Procreate Gallery, so the two can drift apart. Rename in Procreate first when you can.
Can I add an author or tags to a Procreate file? Procreate doesn't offer those fields on a canvas. Put whatever you need into the file name, the stack, and the layer names, and add metadata in a desktop app after export if your workflow requires it.
Why does my renamed file still say "Untitled Artwork" in the exported PSD? The exported file takes its name from what's in the Gallery at the time of export. If it still shows the placeholder, confirm the rename actually saved, then re-export.
Do stack names affect the files inside? A stack is an organizational container in the Gallery. It doesn't prefix the names of the files inside, so keep the project code in each file name as well.