How to Move Part of an Image in Procreate
StyleFrame Team8 min read
To move part of an image in Procreate, select the area with the Selection tool (the S icon), then tap the Transform tool (the arrow icon) and drag the selection to its new position. Everything moves on the active layer only. For a non-destructive result, use Copy & Paste first so the piece lands on its own layer, then move that layer freely. Tap the arrow again to commit the move.
The Quick Version
- Open the Layers panel and tap the layer that holds the part you want to move.
- Tap the Selection tool (S icon) and choose Automatic, Freehand, Rectangle, or Ellipse.
- Select the area. Close a freehand loop by returning to the starting point.
- Optionally, tap Copy & Paste in the toolbar to lift the selection onto a new layer.
- Tap the Transform tool (arrow icon).
- Drag anywhere on the canvas to move the content. Pinch to scale or use the green rotation handle to rotate.
- Tap the arrow icon again to commit the change.
The rest of this guide covers what goes wrong at each step and how to make the move clean enough to survive a handoff into a compositing pipeline.
Step 1: Choose the Right Selection Method
How you select decides how clean the edge of the moved piece will be. Procreate gives you four modes, and each suits a different kind of artwork.
Freehand
Freehand is the most flexible option. You draw around the area, and Procreate fills the enclosed shape. It works well for organic subjects such as a character's arm, a cloud, or one element in a photo collage. Zoom in before tracing, since a shaky edge will carry into the moved piece.
Automatic
Automatic selects by color similarity. Tap or drag across the canvas and Procreate grabs the matching region, with a threshold you can adjust. It works best on flat color artwork and clean linework fills. On textured paintings or photos it tends to produce ragged edges, so combine it with the Add and Remove options to clean up.
Rectangle and Ellipse
These are for geometric regions: cropping a section of a photo, isolating a panel, or slicing an image into tiles. Rectangle is the quickest way to cut an image into pieces for a rearranged layout.
Refine the Selection
Once you have an initial selection, the toolbar gives you more control:
- Add / Remove lets you expand or subtract from the selection without starting over.
- Feather softens the selection edge, which helps the moved piece blend back into its surroundings.
If the moved piece will end up against a new background, a small amount of feathering is usually better than a hard edge. A hard edge on a photographic cutout gives it away immediately.
Step 2: Decide Whether to Move or Copy
This is where most people get surprised. When you select part of a layer and drag it with Transform, Procreate moves the pixels. The area you vacated is left empty, which shows as a transparent hole or exposes whatever sits underneath.
You have two practical ways to handle it.
Copy & Paste. With the selection active, tap Copy & Paste in the toolbar. The piece is duplicated onto a new layer. Move that new layer and the source stays intact. This is the safest default.
Duplicate the layer first. If you're doing a risky edit such as warping or blending two images, duplicate the whole layer before you start. One Procreate community member who stitches photos together does this routinely, in case something goes wrong when the images are merged.
Moving a piece on its own layer also means you can keep adjusting it later. You can change its position, opacity, and blend mode without touching the rest of the image.
Step 3: Pick the Right Transform Mode
Tap the Transform tool and a bounding box appears around your selection. The mode you pick at the bottom of the screen determines how the piece behaves.
Uniform
Uniform moves, scales, and rotates while preserving the original proportions. Touch and drag anywhere on the canvas, inside or outside the bounding box, to move the content. Pinch inside the box to scale from the center, or drag a corner or side node to scale from the opposite anchor. This is the mode to use when you only want to reposition something without distorting it.
Freeform
Freeform lets you stretch the bounding box independently on each axis. It's useful for fitting a piece into a gap, but it will change proportions, so watch for squashed details.
Distort
Distort moves each corner independently, which gives you a perspective-style adjustment. It works well for placing a flat element onto a surface at an angle, such as a label on a box or a window on a building.
Warp
Warp places a mesh over the piece so you can bend and push it in a more organic way. It's the right choice when two cut sections need to meet along an uneven seam, or when a piece has to follow the curve of another shape.
Moving without accidentally resizing
A common complaint is that dragging a selection changes its size or shape. If that happens, you are probably touching a node or handle. Place your finger or Pencil outside the shape and drag from there, and the piece will move without resizing. If you need to rotate, use the green rotation handle rather than pinching.
Step 4: Place It Precisely
Free dragging is fine for rough compositions, but layout work needs accuracy.
Snapping. Toggle Snapping in the Transform toolbar. Blue guidelines align the piece with other layers, and yellow guidelines align it to the canvas center and quadrants. Snapping helps with tidy layouts, but it can fight you when you're nudging a piece into a tight spot. Turn it off for fine manual placement.
Magnetics. Within the Snapping menu, Magnetics lets you align content to an axis you define. It's helpful when you need a moved piece to follow a specific angle, such as a horizon line.
Flip and rotate. Tap the Transform options to flip horizontally or vertically or to rotate. Flipping a piece is a quick way to produce a symmetrical variation.
Interpolation. In the Transform settings, you can choose Nearest Neighbor, Bilinear, or Bicubic. Bicubic generally gives the smoothest result when you move and scale raster content, because it avoids the blocky or blurry artifacts the other options can introduce. If you're resampling a piece several times, the quality loss compounds, so make your adjustments in as few transforms as possible.
Step 5: Blend the Seams
Once the piece is in position, it often needs finishing:
- Smudge or soft brush. A low-opacity soft brush or the Smudge tool can blend the edge into the surrounding pixels. Use a textured brush on textured art so the blend doesn't look airbrushed.
- Liquify. Under the Adjustments menu, Liquify's Push option can nudge shapes together without a hard seam.
- Curves. If dragging and scaling softened the colors, a Curves adjustment can restore contrast.
- Layer masks. Instead of erasing, apply a mask to the moved layer and paint the edge away. Masks are reversible, so you can fix the blend later without damaging the piece.
Common Problems and Fixes
The piece moved but left a hole. You used a direct move rather than Copy & Paste. Undo, copy the selection to a new layer, and move that instead.
Only part of my artwork moved. Selections only affect the active layer. If your subject spans several layers, group them and transform the group, or merge them first if you're sure you won't need them separate.
The edges look jagged. Check the selection quality first. Add a little feather, and make sure interpolation is set to Bicubic.
The image went soft after moving. You probably scaled it up. Procreate is raster-based, so enlarging a piece loses sharpness. Keep scaling to a minimum, or rebuild the piece at higher resolution.
When the Moved Piece Heads Into Motion Work
For motion designers and VFX artists, rearranging an image in Procreate is often just prep. The separated pieces become animation elements, background plates, or style references. A few habits make that handoff smoother.
Keep pieces on separate layers. Copy & Paste each part you intend to animate onto its own layer, name the layers clearly, and export individual PNGs with transparency so After Effects or Nuke can pick them up as discrete elements.
Work at the final resolution. Because Procreate transforms resample pixels, build the canvas at the size you'll need downstream rather than scaling up later.
FAQ
Can I move part of an image without affecting the rest? Yes. Select the area, use Copy & Paste to put it on a new layer, and transform that layer. The original layer stays unchanged.
Why does my selection resize when I try to move it? You are likely dragging a node or pinching. Drag from outside the bounding box, or use Uniform mode so proportions are preserved.
How do I move several layers at once? Group the layers or select multiple layers in the Layers panel, then use Transform on the group.
What's the best interpolation setting? Bicubic is generally the best choice for smooth results when moving and scaling raster content.
How do I avoid a visible seam? Use a small feather on the selection, blend the edge with a soft brush or mask, and match the lighting and color of the surrounding area with Curves.