How to Morph in Procreate
StyleFrame Team8 min read
Procreate has no automatic morph tool, so you build a morph yourself: draw two key poses, then create the in-between stages with Animation Assist, the Warp and Liquify tools, or the keyframe and Flipbook tools in Procreate Dreams. For a smooth result, draw both poses at a similar size and shape, put each stage on its own layer, and keep onion skins on so you can see the previous and next drawing. Frame-by-frame in-betweens give the most control, while Warp keyframes in Dreams are the fastest way to get a rough shape change.
What a Procreate morph actually is
In After Effects you might reach for Mesh Warp or shape path interpolation. Procreate works differently. It has no shape-path interpolation and no automatic blend between two raster drawings. A morph is a sequence of deliberate intermediate drawings or deformations that you create and time yourself.
There are three practical routes:
- Animation Assist (Procreate): hand-drawn in-betweens on separate layers. This is the best option for lettering-to-illustration transitions and stylized, organic morphs.
- Warp and Liquify (Procreate): deforming one image into another shape, usually combined with a dissolve. This is faster but less clean.
- Procreate Dreams: Flipbook for frame-by-frame work, plus keyframes and Performing for Warp, Distort, and filter transitions.
Method 1: Frame-by-frame morph with Animation Assist
This is the most reliable method for a morph with real character, such as a flower becoming a word and then another flower.
1. Set up your key poses
Open Actions > Canvas and turn on Animation Assist. Draw your start and end poses, with each pose on its own layer. If the poses are roughly the same size and occupy similar space on the canvas, the morph is much easier to make convincing. A tall script word turning into a squat pumpkin will fight you the whole way. Adjust the silhouettes so the shapes can travel toward each other.
If you're chaining several morphs (illustration, word, illustration, word), build all the key poses first. Lay them out in order before you draw anything between them.
2. Add holds on your key poses
Duplicate each key pose layer once or twice. If a pose sits perfectly still, the sequence reads as frozen, so trace over the duplicates slightly differently. The small variation keeps the drawing alive during holds.
3. Draw the in-betweens
Keep Animation Assist's onion skinning on so that the layers before and after your current frame show through. Create a new layer between two key poses and redraw the shape at the halfway state. Then work on the gaps that remain, halving them each time.
A few habits help:
- Merge before you resolve. Early in the transition, connect parts of the source shape (letters joining, petals touching) so the viewer sees the form beginning to fuse.
- Let shapes spill and overlap. Parts of the outgoing shape can flow over the incoming one. The overlap hides the fact that two unrelated silhouettes are swapping.
- Handle color changes explicitly. If a green stem becomes a pink letter, either let the old color shrink out of the frame, or shift hue across several in-betweens. Don't switch it in a single frame.
- Use a motion guide. Sketch an arc or path on a layer and keep it visible across the animation. Moving shapes along that arc keeps motion consistent.
4. Set timing and preview
In Animation Assist settings, set the frame rate and loop mode. Hand-drawn animation commonly works well at 12 fps, though you can go higher for smoother results at the cost of more drawings. Play it back, then adjust frame hold durations. Fast in-betweens in the middle of a morph and slower holds at the key poses usually feel more natural than even spacing.
Method 2: Warp and Liquify for single-image morphs
If you don't need a hand-drawn feel, you can deform an existing image.
Warp (Transform tool): Tap Transform, then Warp, and a mesh appears over your layer. Drag corners, edges, or interior mesh points to bend and fold the artwork. Dragging a corner toward the middle can fold part of the image over itself. Tapping a node lets you send it to the front, middle, or back so folds overlap in the right order. Advanced Mesh adds a node at every intersection of the grid for finer control.
Liquify (Adjustments): Push, pull, twirl, and pinch pixels for a more fluid distortion.
To fake a morph between two images with these tools:
- Duplicate both layers.
- Warp image A progressively toward the silhouette of image B across several saved states.
- Warp image B backward toward A's silhouette in the reverse order.
- Crossfade the matching steps by adjusting layer opacity.
Treat this as a rough approach. Warp on raster art softens linework and gets muddy with fine detail, so it's best for blobby, painterly, or graphic shapes.
Method 3: Morphing in Procreate Dreams
Procreate Dreams adds a timeline, so you can mix drawn and keyframed morph techniques.
Flipbook for drawn morphs
Create a Flipbook track, set your frame rate (a 12 fps, four-second project works for a short loop), and place your two key poses at either end. Then add in-between frames one at a time. A few moves that carry over from the Animation Assist workflow:
- Add an anticipation frame by offsetting the first pose slightly opposite to the direction it's about to travel. This makes the departure feel springy.
- Use a guide track. Draw your arc or tapered path and extend it across the whole duration so it stays visible while you animate.
- Hide frames you don't need to see while drawing, then reveal them when you check the sequence.
- Use Color Drop to fill shapes quickly, then patch any spots it misses.
Warp, Distort, and filters with Performing
For a keyframed morph, use Performing or manual keyframes:
- Place the playhead on your content and tap Performing, or tap the playhead and choose Move.
- Select Warp or Distort and drag the bounding box nodes to reshape the content over time.
- Animate Opacity, Gaussian Blur, or HSB from the Filter menu to dissolve between states.
Some limits apply. Warp and Distort can't both be applied to the same content, and neither can be applied to a Group, so each must be on a single piece of content. If you want opacity to apply to a whole group, add keyframes at its start and end instead.
A good hybrid approach is to draw the middle frames in Flipbook, where the shape changes most, and use keyframed Warp and Opacity for the easier parts of the transition.
Common problems and fixes
- The morph pops or jumps. Your key poses probably differ too much in size or position. Redraw one so the silhouettes align, or add more in-betweens near the pop.
- It looks like a crossfade. Add intermediate shapes that belong to neither pose. A morph needs a transitional form, not just two images blended.
- Linework wobbles badly. Some wobble is part of the hand-drawn look. If it's too much, trace each in-between more slowly, and keep line weight consistent.
- It takes too long. Reduce the frame rate, shorten the morph, or hold the key poses longer so the transition itself is brief.
Where Styleframe fits when a morph needs to go further
Procreate is excellent for authoring the key poses and for hand-drawn in-betweens. The time cost comes from the in-betweens themselves, and from carrying a drawn look through longer or more complex shots. This is where Styleframe, an AI video and motion tool built for professional artistic control, can sit beside Procreate in your workflow.
It isn't a one-click replacement for the drawing process. You decide the poses, the timing, and which result to keep.
Bringing a Procreate morph into After Effects or Nuke
Once your morph exists, you will probably want to finish it in a compositing environment, adding camera moves, grain, color, sound sync, or integration with live-action plates.
- Export from Procreate using the export options in Animation Assist, or use the Dreams export options. For compositing, a lossless frame sequence is generally the safer choice over a compressed video, if your export settings allow it.
- Import into After Effects as an image sequence, interpret the frame rate to match your Procreate project, and then apply holds, time remapping, and effects.
Quick checklist
- Draw the key poses at similar size and shape.
- Put every stage on its own layer.
- Keep Animation Assist or Flipbook onion skins on.
- Add anticipation, overlap, and a motion guide.
- Duplicate and re-trace key poses for subtle motion during holds.
- Use Warp, Distort, and Opacity keyframes for the easy parts of the transition.
- Export as frames and finish in After Effects or Nuke.
Morphing in Procreate rewards patience at the in-between stage. If you set up clean key poses and plan the transitional shapes, you'll get a result with more personality than any automatic blend can offer, and you can still hand the frames off to a compositing pipeline when the shot needs more.