How to Morph Faces on Procreate
StyleFrame Team8 min read
Procreate has no one-click face morph, but you can build one with Liquify, the Transform tool's Warp and Distort modes, layer masks, and blend modes. For a still hybrid face, align two portraits, warp them to shared landmarks, then blend them with a mask. For an animated morph, repeat that process across a few in-between frames using Procreate's animation tools. This guide covers both and shows where to hand off to After Effects, Nuke, or an AI keyframe tool when you need more frames than you want to paint.
What "Morphing" Means in Procreate
People use "morph" for three different things, and the right workflow depends on which one you want.
- Hybrid face: one still image that combines features from two faces, like a 50/50 blend.
- Feature morph: reshaping one face toward another, such as a rounder jaw or a wider-set eye, using Liquify.
- Animated morph: a sequence that transitions from face A to face B over time.
Procreate is a painting app, not a dedicated morphing tool. Everything below is manual, which gives you good control over the result but costs time on animations.
Prepare Your Source Faces
Good morphs start with good source material. Most failed morphs trace back to mismatched inputs, not weak technique.
- Match pose and angle. Front-facing to front-facing works best. A three-quarter face morphing into a profile will almost always tear.
- Match scale and lighting. If the key light comes from opposite sides, the blend will look like two photos stacked together.
- Work at high resolution. Warping and Liquify soften pixels, so start with more than you need.
- Keep each face on its own layer. Put each portrait in a separate group so you can transform and mask without touching the other.
Drop a simple guide layer on top: dots or short strokes at the pupils, nose tip, mouth corners, and jaw. These are your landmarks, and you'll use them to align and compare both faces throughout.
Method 1: Align and Blend With a Mask
This is the base technique for a hybrid face.
- Import both portraits as layers. Lower the top layer's opacity to about 50% so you can see both faces.
- Open the Transform tool and move, scale, and rotate the layer until the eyes line up. Eyes are the anchor because viewers read them first.
- Switch to Distort or Warp to bring the mouth, nose, and jawline into agreement.
- Restore the top layer to 100% opacity and add a layer mask.
- Paint on the mask with a soft round brush. Black hides, white reveals. Reveal the second face's eyes and brow, for example, while keeping the first face's mouth and jaw.
- Keep the mask transitions wide across flat areas like cheeks and forehead, and tighter across edges like lips or eyelids.
Masks are non-destructive, so you can keep revising the blend as you go. That matters more than it seems, because the first pass at a morph is rarely right.
Method 2: Reshape With Liquify
Liquify is how you nudge one face's structure toward the other's after the rough alignment.
- Use Liquify's reshaping tools for jaw width, cheekbone height, and lip fullness.
- Use them on the nose and eyes to tighten or enlarge those regions.
- Use them sparingly to fix a crooked mouth corner.
- Work locally and undo or soften distortion as needed, so you can recover from over-pushing without starting over.
Keep Size large and Pressure low for structural changes. Small strokes with high pressure create lumpy, uncanny edges. Apply Liquify to a duplicate of the layer so you always have a clean original to return to.
A practical rule: move features by landmark, not by feel. If face B's pupils sit 8% further apart than face A's, shift them by roughly that much, then check against your guide dots.
Method 3: Feature-by-Feature Swap
If you want the nose of one face and the eyes of another, treat each region as its own layer.
- Select the feature with the freehand Selection tool, with feathering turned on.
- Copy and paste it to a new layer.
- Transform, warp, and rotate it to fit the destination face.
- Mask the edges softly so the skin tone transitions gradually.
This is closer to a classic face swap than a true morph, but it's useful when you want to control exactly which traits carry over.
Match Color, Texture, and Light
A well-warped morph still reads as fake if the skin doesn't agree. Fix this before you call the image done.
- Add a clipping mask layer above the pasted feature, sample the destination skin tone, and paint over it with the blend mode set to Color. Mask out the eyes and lips so they keep their natural hue.
- Use Curves to fine-tune contrast and brightness between the two sources.
- Match grain and sharpness. If one photo is crisp and the other soft, add noise or a slight blur so they sit at the same level.
- Paint shadows and highlights on separate layers where the features meet, such as under the nose or along the brow. Keep the opacity low.
Finish with a touch of the Smudge tool along seams, but sparingly. Too much smudging produces a waxy look.
Animating the Morph in Procreate
Procreate's animation tools can turn the same layers into a timed sequence. A usable face morph typically needs three kinds of frames.
- Start and end keyframes: the clean face A and the clean face B.
- Key in-betweens: the 25%, 50%, and 75% blends, built using Methods 1 and 2 with the mask and warp progressively shifted.
- Fill frames: extra in-betweens as needed to smooth the motion.
Keep your landmark guide dots on a separate layer that you hide on export, so features move predictably from frame to frame rather than jittering.
For a short morph, a handful of frames can work if you're after a stylized, hand-drawn feel. For smooth, photographic transitions, you'll need considerably more, and the manual effort adds up quickly. That's the point where it's worth moving the work out of Procreate.
For anything headed into a larger edit, you'll usually want your start and end stills, or individual frames, rather than a baked clip.
Taking the Morph Into After Effects or Nuke
Procreate is good for authoring the faces. Compositing tools are generally better at the interpolation.
- After Effects: Bring the two aligned faces in as stills. Use its warping tools to deform each toward the other's landmarks, and crossfade between them with animated opacity. Automated frame blending can smooth the result, though it can also produce artifacts around the mouth and eyes, so check frame by frame.
- Nuke: Use its warping tools to define source and destination shapes for each face and animate the warp, then mix between the results.
In both cases, the benefit over painting every frame is that you control the deformation with keyframes, and you can revise timing without repainting.
Where AI Keyframe Tools Fit
If you want in-between frames without drawing each one or building a full warp setup, an AI keyframe tool can help. These tools generally let you supply start and end stills, such as your finished Procreate faces, and generate the transition between them.
A few practical notes for this use case:
- Use your Procreate frames as the anchors. Your hand-built face A and face B define the identity at each end, so the generation interpolates between art you've already approved.
- Check what a tool offers. Features such as style transfer, upscaling, and export formats vary by tool, so confirm that its output will drop into your After Effects or Nuke pipeline.
Generated in-betweens still need review. Check the eye line, teeth, and hairline at each frame, and plan to composite fixes or re-run with adjusted keyframes where the interpolation drifts. Only use faces you have the rights and consent to use.
Common Mistakes to Avoid
- Mismatched head angles. The most common cause of a morph that looks broken instead of blended.
- Over-liquifying. Large, high-pressure pushes create bulges. Make several gentle passes instead.
- Ignoring the eyes. If pupils and eye lines wander between frames, the whole sequence feels unstable.
- Flattening too early. Keep masks and warp layers live until the very end.
- Skipping color matching. Warping solves shape, not tone.
- Painting every in-between. Past a handful of frames, hand off to a warp-based tool in After Effects or Nuke, or generate in-betweens from keyframes.
Quick Workflow Summary
- Choose two faces with matching pose, light, and scale.
- Mark landmarks on a guide layer.
- Align with Transform, refine with Warp and Distort.
- Blend with layer masks and reshape with Liquify.
- Match color, grain, and shadows.
- For animation, build keyframes and key in-betweens using Procreate's animation tools.
- For longer or smoother sequences, move to After Effects, Nuke, or a keyframe-driven generation tool, and composite the final result in your usual pipeline.
Procreate won't automate a face morph, but it's an excellent place to design the faces and key frames that anchor one. Do that part by hand, then pick the interpolation method that matches the length and polish your project needs.