How to Mix Peoples Faces on Procreate
StyleFrame Team9 min read
To mix two people's faces in Procreate, import both portraits as layers, select the face or features you want with the Selection tool, and copy them onto a new layer above the base portrait. Align the pieces with Transform (Distort or Warp), hide the seams with a layer mask, and match skin tone with a clipping-mask layer set to Color or Soft Light. For a true blend rather than a swap, mask individual features, such as the eyes from one person and the jaw from the other, and reshape the result with Liquify. Procreate has no automatic face-swap tool, so everything here is manual compositing, which gives you full control over the result.
Swap vs. blend: decide what "mixing" means first
"Mixing faces" usually means one of two things, and the workflow differs slightly.
- Face swap: Person A's face is placed onto Person B's head. You need a clean cut, careful alignment, and strong color matching along the hairline, jaw, and neck.
- Face blend (hybrid): Features or proportions from both people are combined into a new face. You rely more on layer opacity, feature-by-feature masks, and Liquify to reconcile different proportions.
Both start with the same setup. Pick your approach before you cut anything, because it determines which layer is the "base" and which is the "donor."
Choose source images that will cooperate
Most failed face composites fail before the first selection. Check these before you import:
- Head angle: Match yaw, pitch, and tilt as closely as you can. Fixing a three-quarter view against a frontal view with Warp alone rarely looks natural.
- Lighting direction: If one face is lit from the left and the other from the right, you'll end up repainting shadows by hand.
- Resolution and sharpness: A sharp donor face on a soft base photo reads as a sticker. Match detail levels, or plan to blur or add grain later.
- Expression: Matching mouth openness and eye direction saves a lot of liquifying.
- Rights and consent: If you're working with real people's likenesses, make sure you have permission, especially for anything that will be published or used in client work.
Create your canvas at the resolution of your base image so you aren't resampling. If you need to adjust it, use Actions > Canvas > Crop and Resize, and avoid resampling more than once.
Step-by-step: mixing faces in Procreate
1. Import and organize your layers
Bring both portraits in via Actions > Add > Insert a Photo. Each arrives as its own layer. Rename them (swipe or double-tap the layer name) so you don't lose track: Base, Donor, and later Donor Mask or Color Match. Keep the base at the bottom and the donor above it.
2. Select the face on the donor layer
Open the Selection tool (the S icon) and use Freehand mode for the cleanest control. Trace around the area you want to move:
- Follow the hairline, jawline, and the inside edge of the ears if they're part of the swap.
- Stay slightly inside the edge of the face rather than outside. Including background or hair creates halos that are harder to fix than a slightly small selection.
- Use Feather in the selection toolbar to soften the boundary. A small feather is usually enough on high-resolution images; larger values blur away skin texture at the edges.
Then swipe down with three fingers to open the Copy & Paste menu and choose Copy & Paste (not Cut) so the original donor stays intact. The face now sits on its own layer.
3. Align and transform
Select the new face layer and open the Transform tool (the arrow icon). Drop the layer opacity to roughly 50% so you can see the base underneath, then:
- Use Uniform to scale and rotate until the eyes sit on the same line as the base subject's eyes.
- Check the distance between the pupils. If it's off, scale before warping.
- Switch to Distort or Warp to nudge the corners of the face, such as the jaw and forehead, to fit the new head shape.
Aligning eyes first is the most reliable rule. People read faces by the eyes, and a slightly off nose or mouth is more forgivable than misaligned eyes.
4. Hide the seams with a layer mask
Restore the layer to 100% opacity, tap the face layer, and choose Mask. Paint on the mask with a soft round brush:
- Black hides pixels, white reveals them.
- Work around the edges of the face so the donor blends gradually into forehead, cheeks, and neck.
- Use a lower brush opacity and build up gradually for more control.
Masks are non-destructive, so you can bring back anything you hid by accident. This is also where you decide which features come from which person. Hiding the donor's mouth on the mask lets the base's mouth show through, and the reverse works the same way.
5. Match color and light with a clipping mask
Add a new layer above the donor face, tap it, and choose Clipping Mask so your painting affects only the face below. Then:
- Set the blend mode to Color to transfer skin tone without changing detail.
- Sample a skin tone from the base subject with the color picker and paint across the donor face with a soft brush.
- Lower the layer opacity until the tint feels natural rather than flat.
- Add a second clipped layer set to Soft Light or Multiply to paint in shadows, such as under the jaw, along the nose, and in the eye sockets, so the lighting direction matches the base photo.
Mask out the eyes, lips, and eyebrows from your color layer so they keep their natural variation. Then use Adjustments > Curves or Color Balance on the donor layer to correct overall brightness and warmth. If the donor has a color cast the base doesn't, fix it here before painting more.
6. Reshape with Liquify
Open Adjustments > Liquify on a merged copy or on the donor layer itself. Use Push at low size and pressure, or Twirl sparingly, for small corrections:
- Nudge the jaw to follow the base's neck angle.
- Move the mouth corners to match expression.
- Adjust nose width to match the base's proportions.
Keep changes small. Large liquify moves tend to flatten skin texture and distort pores in ways that stand out on high-res output. If you need a big shape change, go back to Distort or Warp instead.
7. Add texture and finish
A composite looks fake mostly because the pieces don't share the same texture. Try these final passes:
- Add a thin layer of grain over the whole image (Adjustments > Noise) so the donor and base share a texture.
- Apply a very slight Gaussian Blur to the donor layer if it's sharper than the base.
- Use the Smudge tool along remaining seams at low pressure.
- Paint soft shadows and highlights on a new layer to connect the face to its surroundings, particularly where the jaw meets the neck.
Zoom out frequently. Seams that look obvious at 300% often disappear at normal viewing size, and the reverse is also true.
Blending two faces into a hybrid
If you want a new face rather than a swap, adjust the process:
- Keep both faces on separate layers, each aligned to the same eye line.
- Set the top layer to about 50% opacity as a starting point and look at what each face contributes.
- Use layer masks to keep specific features: for example, eyes and brows from face A, nose and mouth from face B.
- Use Liquify across the merged result so proportions feel like one person instead of two overlapping portraits.
- Do a unifying color pass with a clipped Color layer so skin tone is consistent across the whole face.
Hybrids are more forgiving about alignment because you're inventing a face, but they need more attention to proportion, since symmetry and spacing problems are very noticeable.
Common problems and quick fixes
- Visible edge or halo: Reduce the mask's hardness, shrink the selection slightly, or smudge along the border.
- Skin tone mismatch: Add a Color-mode clipped layer and check the neck and ears, not just the cheeks.
- "Pasted-on" look: Usually a lighting issue. Paint shadows and highlights to follow the base photo's light direction.
- Face looks flat: You've probably over-blurred or over-liquified. Restore texture with grain or by reducing mask-painted blur.
- Features don't line up: Undo and redo alignment using the eye line, rather than pushing more with Liquify.
Taking a Procreate composite into motion
Procreate is a good stills tool, but professional motion work needs more. A face blended in a still doesn't carry across a moving shot on its own. If you're a motion designer, animator, or compositor, the Procreate result usually plays one of two roles:
- A design or look-development frame. Export the composite as a PNG and bring it into your compositing or editing software as a reference or a keyframe for a pitch or style frame.
- A source for a moving sequence. For live-action footage, face replacement is better handled with dedicated tracking and compositing software, where you can match the move, grain, and lens characteristics frame by frame.
Do the manual face-matching steps above in Procreate first, then treat the result as a controlled input for motion.
Export settings for the handoff
- Export the final composite as PNG for lossless quality with transparency if you have it, or TIFF/PSD if you want to keep layers for further work in other editing software.
- Keep a layered Procreate file or PSD of the masks and color layers, so you can revise skin tone or seams after client feedback.
- Match your canvas to your delivery resolution, such as 3840×2160 for a 4K frame, before final painting, so you aren't resampling at the end.
- Note your color space. Check your canvas color settings before bringing the file into a color-managed pipeline.
Quick FAQ
Can Procreate swap faces automatically? No. All face mixing in Procreate is manual selection, masking, and painting.
What's the best selection method? Freehand with a small feather, tracing slightly inside the face edge.
Why use masks instead of the eraser? Masks are reversible. You can repaint the boundary as many times as needed without losing pixels.
How do I keep skin texture? Use Color or Soft Light clipped layers for tone correction instead of painting opaque skin tone over the donor, and use Liquify in small increments.
Face mixing in Procreate comes down to disciplined alignment, soft masks, and honest color matching. Get those right in the still, and the composite holds up whether it ends up as a print, a style frame, or a keyframe in a larger motion project.