How to Measure in Procreate
StyleFrame Team8 min read
Procreate has no ruler or measurement tool. The workaround is the 2D Grid in Drawing Guides: set the grid size to a known number of pixels or physical units, then read distances by counting squares. To set it up, go to Actions → Canvas, turn on Drawing Guides, tap Edit Drawing Guide, choose 2D Grid, and enter a grid size. Because the grid only means something relative to your canvas dimensions and DPI, check those first.
What Procreate Offers (and What It Doesn't)
Procreate gives you a visual grid and a numeric grid-size setting. It does not give you a line-length readout, an angle tool, a protractor, or a way to calibrate a scale from two points on a page. Designers and architects have asked for these on Procreate's community forum, including calibrated scale, linear and area measurement, and live length readouts while drawing. Procreate's team has said it may look at rulers and scale indicators, but nothing has shipped.
Measurement in Procreate is therefore an exercise in setup. You decide what one grid square represents, then do the arithmetic yourself. It's less convenient than a ruler, but it is precise enough for storyboards, styleframes, layout planning, and print sizing.
Step 1: Know Your Canvas Dimensions
Every measurement depends on pixel dimensions, so confirm them before you place a grid. Check your canvas size and DPI before you start. If you're starting from scratch, create a custom canvas and enter width, height, and DPI explicitly.
For video work, set the canvas to the exact frame size you'll deliver, such as 1920 × 1080 or 3840 × 2160. If you sketch at an arbitrary size and rescale later, your grid-based measurements will drift and any margins you planned will land in the wrong place.
Step 2: Turn On the 2D Grid
- Tap Actions → Canvas and toggle on Drawing Guides.
- Tap Edit Drawing Guide.
- Select 2D Grid from the bottom tabs.
- Tap the numeric readout for grid size above the slider and type a value with the popup keyboard.
- Adjust opacity and thickness with the sliders, and change the guide color with the hue slider so it stays readable against your artwork.
The grid is a guide, not part of your artwork, so you can leave it on while you work.
Step 3: Choose a Grid Size That Does the Math for You
The trick is to pick a grid size that divides evenly into your canvas, so each square represents a number you can reason about. Procreate's own example uses a 4000 × 4000 px canvas with a 250 px grid, which produces 16 × 16 squares. That layout was used to plan a floor plan where each square equals one square meter.
Here are some useful pairings for common motion-design frame sizes:
Pick the coarsest grid that still answers your question. A fine grid is harder to read at a glance, especially on an iPad screen.
Measuring in Real-World Units
If you're planning something for print, or scaling a physical space, set the grid to match your units. Procreate's help documentation walks through a clear example: an A4 canvas rotated to landscape with a 2D Grid set to 1-inch squares. A tattoo design was resized to cover 4 × 2 squares, so it would print at 4 × 2 inches on the sheet.
The arithmetic behind this is simple:
- Pixels = inches × DPI. At 300 DPI, a 1-inch grid square is 300 px.
- Pixels per meter (for scaled plans) is whatever you define. If one meter equals 250 px, a 3 × 3 m room occupies 750 × 750 px.
Two practical notes. First, if you're printing on US Letter instead of A4, start from Procreate's Paper canvas template so the proportions match. Second, set the DPI when you create the canvas, because changing it afterward changes your effective print size.
Measuring for Video: Safe Areas, Margins, and Layout
Most motion designers use Procreate for boards, concept art, and styleframes, not print. Here the grid works as a layout tool.
Margins and safe areas. On a 1920 × 1080 frame, a 5% margin is 96 px on the sides and 54 px top and bottom. If you use a title-safe zone of 80% of the frame, that leaves 192 px on the left and right and 108 px on the top and bottom. Pick a grid size that lands on those lines, or note the pixel values and place elements by counting squares.
Thirds and golden placement. A 16 × 9 grid on a 1920 × 1080 frame makes the rule of thirds fairly easy to read, since the thirds fall at roughly 5.33 and 10.67 squares across. If that's awkward, use a 160 px grid on a 1920 canvas: it gives 12 columns, so the vertical thirds fall exactly at columns 4 and 8. On a 1080 px height it gives 6.75 rows, so adjust vertical placement by eye.
Centering. For anything that needs to sit dead center, use Symmetry rather than the grid. Under Edit Drawing Guide, the Symmetry tab has a blue reticle you can move to set the center point. Vertical symmetry with Assisted Drawing mirrors your strokes across the axis, which is handy for symmetrical logos, vehicles, or character faces. Rotational Symmetry flips strokes as they mirror to adjacent segments, which is useful for radial patterns.
Scale between elements. To keep characters or props consistent across multiple boards, decide that, say, a standing character is 6 squares tall, and hold that rule on every canvas that shares the same grid. This is a simple, reliable form of measurement, even without a ruler.
Measuring From a Reference Image
Copying proportions from a photo is the other common reason to measure. Procreate's built-in reference window is small, and users have pointed out that it's awkward for the classic "hold the pencil at arm's length" technique. The tools they've requested, such as a locked reference window, a matching grid on reference and composition, and an echoed angle or length, don't exist.
You can approximate them:
- Put the reference on the canvas as its own layer, and scale it to the same canvas dimensions as your drawing. Keep the grid on so you can compare positions square by square.
- Pick a unit length. Choose a feature in the reference, like a head height or a door width, and call that one unit. Then use the grid to check how many units wide or tall other features are.
- Lower the reference opacity and compare against your sketch layer to catch proportion errors.
- Lock the reference layer so you don't nudge it accidentally while drawing close to the screen.
Where Procreate's Method Falls Short
Be realistic about the limits. You cannot:
- Read a line's length as you draw it.
- Measure an angle or a radius.
- Calibrate a scale from two points.
- Calculate areas.
If your work needs those, such as product design or architectural sketching, users on the forum have named Concepts and Morpholio as apps they turn to, and one mentioned Affinity Designer for accurate measurements. A workable pattern is to take dimensioned drawings into one of those tools, then bring the result back to Procreate for rendering and finish. For most storyboard and styleframe work, though, the grid is enough.
Carrying Measurements Into Your Motion Pipeline
A board is only useful if it survives the trip into production. Keep a few habits that make that easy:
- Export at the delivery resolution. If your comp is 3840 × 2160, build the Procreate canvas at that size so a position of 480 px from the left edge in Procreate is also 480 px in After Effects.
- Note your grid values. Put the grid size and the unit it represents in the layer name or file notes so another artist can rebuild it.
- Separate layers by depth or role (background, midground, character, effects) before export, so parallax and camera moves in After Effects, Cinema 4D, Blender, or Nuke start from clean elements.
This is also where a tool like Styleframe can fit, if you're taking Procreate artwork into motion.
Common Mistakes to Avoid
- Setting the grid before the canvas size is final. Resizing the canvas afterward breaks the relationship between grid squares and units.
- Ignoring DPI. A canvas that looks right on screen can print at the wrong size if the DPI isn't set deliberately.
- Using a grid that doesn't divide evenly. Awkward fractions of squares make measurement error-prone. Choose grid sizes that tile the canvas cleanly.
- Relying on the grid to show your layout to others. If a client needs to see your layout lines, draw them on their own layer and export a separate version.
- Mixing units across boards. Decide once whether a square is 120 px, one meter, or one inch, and hold it across the project.
Quick Reference
- Check the canvas size and DPI before placing a grid.
- Turn on Drawing Guides and open Edit Drawing Guide → 2D Grid.
- Enter a grid size that divides your canvas evenly.
- Decide what one square represents and write it down.
- Count squares to measure, and use Symmetry for centering.
- Export at delivery resolution for the next stage of your pipeline.
Procreate won't measure for you, but a deliberate grid, an exact canvas size, and a bit of arithmetic get you accurate, repeatable results. For motion work, that's usually enough to keep boards, styleframes, and final comps lined up.