How to Make Your Own Pattern Brush in Procreate
StyleFrame Team8 min read
To make a pattern brush in Procreate, build a square, high-resolution black-and-white tile, copy it, and create a new brush. Then paste the tile into Brush Studio as the Grain source (for continuous patterns) or the Shape source (for stamps), and invert it with a two-finger tap. Finish by tuning the Grain, Rendering, Apple Pencil, and Properties settings so the pattern scales and repeats the way you want. Work on a square canvas of roughly 10 to 12 inches at 300 dpi so the brush stays sharp at large sizes.
Why Procreate pattern brushes matter for motion work
Pattern brushes are not just an illustrator's convenience. For motion designers, they are a fast way to produce custom textures, halftone-style fills, hand-drawn repeats, and mattes that no stock library has. Paint a pattern in a few strokes, export it, and you have a unique asset for After Effects, Cinema 4D, Blender, or Nuke.
The same properties that make a brush useful on an iPad (a tileable, grayscale, resolution-independent-feeling source) also make it useful as a texture map or overlay in a comp. That is why it pays to get the tile right at the start.
Step 1: Prepare your canvas and artwork
Start with a square canvas. A non-square canvas distorts the brush when Procreate maps it. Use a large size, such as 10 × 10 or 12 × 12 inches at 300 dpi, because small sources turn soft when the brush is scaled up.
Next, decide what kind of brush you're making:
- Grain-based pattern brush: the pattern fills the stroke like a texture. Paint a swath and the pattern appears wherever you drag.
- Stamp brush: a single motif (a heart, dot, or spiral) repeats along the stroke using the Shape source and spacing.
Draw in grayscale only. For a hard, fully opaque pattern, stick to pure black and white. Mid-grays produce semi-transparent results, which is useful if you want soft, layered, or painterly patterns but a surprise if you wanted solid ink.
Make the tile seamless
If you want the pattern to flow without visible edges, build the tile so it wraps:
- Keep motifs from touching or being cropped by the canvas edge, or plan to fix those edges deliberately.
- Duplicate your artwork layer and slide it halfway across the canvas with snapping on. Erase any hard seam, then merge.
- Repeat the process vertically.
- Fill any gaps in the middle with the same motifs.
Checking the tile by offsetting it before you import saves a lot of troubleshooting later. Visible seams in a brush are tedious to diagnose once the brush is built.
If drawing a repeat by hand isn't your thing, you can generate a seamless pattern with an AI image tool that offers a seamless preset, export it as a JPG, and use that as your source. Use a flat white background and a simple design so it reads cleanly as a brush.
Step 2: Create a brush set and a new brush
Organize first. In the Brush Library, tap the plus sign at the top to create a new set, name it, then tap the plus inside that set to create a new brush. This opens Brush Studio.
Keeping your custom brushes in their own set makes them easy to find, export, and back up. This matters if you start building a library of textures for client projects.
Step 3: Import the pattern as Grain or Shape
Copy your artwork with a three-finger swipe down and choose Copy All. Open your new brush, then:
- Tap Grain (or Shape for a stamp brush).
- Tap Edit next to the blank source image.
- Tap Import in the upper right, then choose Paste. You can also import a photo from your library.
- Tap the source with two fingers to invert it.
- Tap Done. Changes are not saved until you do.
Why inversion matters
Procreate's brush engine treats white as opaque and black as transparent. If you paste black artwork on white, you'll get the reverse of what you expect, so the two-finger invert is part of the standard workflow.
A common failure is importing a PNG with a transparent background and black artwork. The engine reads black as transparent, so you effectively import an empty square, and the source stays blank. Fix it by making the design white, placing the black design on a solid white background, or saving as a JPG.
Step 4: Tune the brush settings
This is where a pattern becomes a usable brush. The most important adjustments:
Grain
- Set the behavior and scale so the pattern size responds the way you want when you change brush size. Lowering Zoom makes the pattern scale with the brush, which is usually preferable, though it's a matter of taste.
- Turn off offset jitter if you want the pattern to continue where it left off after lifting the pencil. Jitter randomizes the placement and breaks continuity.
- If your source is a repeating tile, confirm that auto-repeat is enabled so edges don't show.
Rendering
- If your source uses grays rather than pure black and white, a mode such as Light Glaze helps preserve value and texture in the result.
Apple Pencil
- Reducing the pressure-opacity response gives you a consistent pattern regardless of how hard you press. Keep it high if you want light pressure to fade the pattern and heavy pressure to deepen it.
- Turn off tilt behaviors you don't need.
Properties
- Raise the minimum and maximum brush sizes. Small sizes can make a pattern too tiny to read, so test at both extremes and adjust.
- Check the preview size, which affects how the brush looks in your library. Set it after the other size values are final.
Stamp-specific
- Increase Spacing under Stroke so stamps don't smear into each other.
- Enable orientation to the screen if you don't want stamps rotating with the stroke.
You can return to Brush Studio any time, edit the source, and paste an updated version. You don't need to rebuild the brush.
Step 5: Test, refine, and add color behavior
Open a fresh canvas and test the brush at several sizes, with fast and slow strokes. Look for seams, pattern scale that's too large or small, and unwanted opacity changes.
Pattern brushes also work well on clipping masks, where you can change opacity, blend mode, and color without repainting. This is a practical way to try several looks quickly.
For soft gradients inside a pattern, try color dynamics. Adding a modest amount of hue variation under color pressure (roughly 35% in one tutorial) can produce a subtle shift as you paint. Treat that as a starting value, not a rule.
Once you're happy, name the brush in the About section so it's identifiable later.
Step 6: Bring your patterns into a motion pipeline
A brush is only useful in production if you can get its output out cleanly. A practical workflow:
- Paint the pattern on a large canvas at the final resolution you need, not a small canvas you plan to upscale.
- Export as PNG (keep transparency if you painted on a transparent layer) or as a flattened JPG for textures.
- Import into After Effects. Use it as an overlay with a blend mode, a track matte, or a tiled background. A seamless source makes the tiling less noticeable.
- Reuse in 3D. In Cinema 4D or Blender, a seamless grayscale pattern may work as a bump, roughness, or alpha map. In Nuke, it may work as a texture or a matte source.
Because pattern brushes give you consistent, repeatable marks, you can paint matching variants (a coarse one for backgrounds, a finer one for details) and keep a cohesive hand-drawn language across a whole project.
Where Styleframe fits when patterns need to move
A Procreate brush gives you static, hand-made assets. The harder question for animators is how to carry that look onto moving footage or generated sequences without redrawing every frame.
is an AI video and motion tool built for artistic control, and it can pick up where your brush work leaves off. It can use reference images, such as a painted sample using your custom pattern brush, to guide the look rather than relying on a text prompt alone.
Your hand-built Procreate textures stay part of the process: use them as style references, then composite the result with your usual layers and effects.
Troubleshooting checklist
- Brush paints nothing or a blank square: check for a transparent PNG with black artwork. Re-save as a JPG or use white artwork.
- Pattern looks inverted: tap the source with two fingers in the editor.
- Pattern is blurry: the source canvas was too small. Rebuild at a larger size.
- Visible seams: offset the tile and repair edges, and enable auto-repeat.
- Stamps blur together: increase Spacing.
- Pattern size is inconsistent: revisit Grain scale and the brush's min and max sizes.
- Opacity changes unexpectedly: adjust the Apple Pencil pressure settings.
Final thoughts
The core of a good pattern brush is a clean, square, high-resolution, seamless source, plus a few considered settings. Get those right and you can make a distinctive library of textures quickly. For motion artists, the extra step is treating each brush as a production asset: export it cleanly, tile it properly, and carry it into your compositing and 3D tools where it can earn its keep.