How to Make Your Own Brush Set in Procreate
StyleFrame Team8 min read
To make your own brush set in Procreate, create a new set at the top of the brush library, tap the plus inside it to open Brush Studio, and build each brush from a Shape source (the stamp) and a Grain source (the texture). Use square, high-resolution, pure black-and-white source images, then tune Stroke Path settings like spacing and jitter, name the brush, and drag it into your set. Once you have a few brushes, you can share the set as a file or back it up through the Files app.
Before you start: prepare your source images
Most failed custom brushes come down to the source art, not the settings. Get these basics right first:
- Work on a square canvas. Non-square sources get distorted when Procreate maps them to a brush tip or texture. A 2048 × 2048 px canvas is a common starting point.
- Work large. Brush sources made small look soft when you scale the brush up. Build them at high resolution, such as 10 × 10 inches at 300 dpi, so strokes stay crisp on a big canvas.
- Use pure black and white for opaque results. Procreate reads white as opaque and black as transparent. Grays and colors produce semi-transparent marks, which is useful for soft textures but not for a hard stamp.
- Watch your file format. A black design saved as a PNG with a transparent background is effectively a blank square to the brush engine. Save as a JPG with a white background, or make the design white. You can flip the effect later by tapping the source with two fingers to invert it.
For motion work, this prep step is where you can gather real-world material. Ink splatters, sponge stamps, watercolor washes on cold-press paper, bark, sand and scanned paper all make strong shapes and grains. Crop them to 1:1 before importing.
Step 1: Create a new brush set
Keep custom brushes out of Procreate's default sets, because you can't rename or delete those.
- Tap the brush icon to open the brush library.
- In the sets list on the left, scroll to the top and pull down, or tap the plus, to add a new set.
- Name it something you'll recognize, like "Grit Textures" or "Ink Stamps."
You can't nest sets inside other sets, so plan a flat naming scheme early. If you expect to build several themed collections, a prefix system ("01 Ink," "02 Texture") keeps the list orderly, since Procreate doesn't sort sets alphabetically for you.
Step 2: Start a new brush
There are two ways to begin:
- From scratch. Open your new set and tap the plus. This opens Brush Studio with default settings.
- From an existing brush. Swipe left on any brush and tap Duplicate, then tap the copy to open it. This is the safer route when you want a variation, since the original stays untouched.
Starting from a duplicate is usually faster. A good ink pen already has sensible pressure and taper behavior, so you only need to swap the shape or grain.
Brush Studio shows a live preview stroke alongside the settings. Keep an eye on it as you edit so you can see each change as it happens.
Step 3: Set the Shape source
Shape is the stamp: the form that gets repeated along your stroke. Think of a crayon tip, a round nib or a leaf print.
- In Brush Studio, tap Shape, then tap Edit next to the Shape Source. On smaller screens you may need to tap the shape directly.
- Tap Import and choose either the Source Library or your own image from Photos, Files or the camera.
- Tap Done.
The Source Library has over 150 built-in shapes, which is a good way to learn how shapes behave. For a unique look, import your own: a hand-drawn blob, a scanned ink splat or a simple icon.
If your imported shape paints a blank or inverted result, check the polarity. The design should read white on black. Two-finger tap the source in the editor to invert it.
For a repeated stamp such as a heart, star or leaf, also open the brush's General settings and turn on Orient to Screen so the stamp doesn't rotate with your stroke direction. Then raise spacing so the stamps separate from each other.
Step 4: Set the Grain source
Grain is the texture applied inside the shape. Shape plus grain gives you the final mark, and small changes to either one can transform the brush.
- Tap Grain, then Edit next to the Grain Source.
- Import from the Source Library, or bring in your own texture such as a scanned wash, a paper photo or a concrete surface.
- Turn on Auto repeat if you want the texture to tile without visible edges.
A seamless grain is the right choice for brushes you'll drag across a large area. A non-seamless grain works better for stamp-style brushes you tap once.
Test grain behavior in the preview and on a scratch canvas, since different grain setups suit different brushes.
Step 5: Tune Stroke Path and dynamics
This is where a stamp becomes a usable tool.
- Spacing. This controls the gap between stamps. Low values blend them into a smooth line, and higher values show individual stamps.
- Jitter. This scatters stamps off the stroke path, which is useful for spatter, dust and organic edges.
- Fall-off. This makes the stroke fade out as if the paint is running dry.
- Taper. This shapes how the stroke starts and ends, so lines can swell and thin naturally.
- Pressure and tilt response. If you use an Apple Pencil, explore the responsiveness settings so the brush reacts to your hand.
Change one setting at a time. Brush Studio has hundreds of options, and stacking many changes at once makes it hard to tell what caused a result. Procreate remembers your settings as you switch between brushes, so you can move back and forth without losing your adjustments.
For watercolor-style brushes, the settings worth exploring are taper, dilution, opacity, flow and bleed.
Step 6: Test, name and save
Create a scratch canvas and paint a range of strokes: slow, fast, light, heavy, long curves and short taps. Try different sizes and colors. If the brush looks blurry at large sizes, return to your source and rebuild it at a higher resolution.
When you're satisfied:
- Open About this brush and give it a clear name. You can also add your name or signature there.
- Tap Done. The brush appears in your selected set.
To reorder brushes, press and hold one, then drag it. To move brushes between sets, pick one up, scroll the sets list with your other hand and drop it into the target set. Tap other brushes while holding to move several at once.
Troubleshooting common problems
The brush paints nothing. Your source is probably black on a transparent background. Re-export as a JPG on white, or invert it.
Edges of the texture are visible. Turn on Auto repeat for the grain, or make the texture tile before importing.
The stamp is stretched. The source wasn't square. Re-crop to 1:1.
The brush is semi-transparent when it should be solid. Your source contains grays. Push it to pure black and white with levels or threshold before importing.
The stamp rotates oddly. Check the General settings and enable the option to orient to the screen.
Sharing, backing up and organizing your set
Brush libraries live in the Files app, either under On My iPad → Procreate → Brushes or in iCloud Drive. Folders inside are your libraries, folders inside those are sets, and individual .brush files are the brushes. That structure makes backups simple: copy the folder. You can also import brush files by dropping them into a set folder, and changes made in Files are reflected in Procreate.
Be careful when moving or deleting items there, since removing a folder removes the brushes in it. To share a single brush, swipe left on it and tap Share. To bring in someone else's work, use Import from Files in the brush library.
Using Procreate brushes in a motion pipeline
If you're an animator, motion designer or compositor, custom brushes are most useful for producing assets you'll animate or composite elsewhere: ink textures, grunge overlays, hand-drawn wipes, line-boil frames and painted mattes. A practical workflow:
- Paint or stamp on transparent layers in Procreate, keeping elements separated.
- Export as PNGs with transparency.
- Import them into your compositing, editing or 3D software and treat them like any other layered artwork, using track mattes, displacement, blend modes or texture mapping.
Quick checklist
- Square, high-resolution sources
- Pure black and white for opaque marks
- A dedicated new brush set
- Shape and grain defined separately
- Spacing, jitter and taper tuned one at a time
- Named, tested and backed up through Files
Build three or four brushes this way and you'll have a reusable toolkit. Keep your best source scans organized, because they're the part of the process that makes your brushes impossible to replicate.