How to Make White Sticker Outline Procreate
StyleFrame Team8 min read
To make a white sticker outline in Procreate, duplicate your artwork layer, Alpha Lock the copy and fill it with white, then turn Alpha Lock off and apply a Gaussian Blur of about 20-25%. Next, use Automatic selection on the blurred layer, set the threshold so the selection sits just outside the artwork, invert it, and fill it on a new layer beneath your art. Procreate has no native offset feature, so this blur-and-select workaround is how you build the outline.
If you animate, the same outline is easier to build non-destructively in After Effects, and the sections below cover both.
What You Need Before You Start
- Procreate on an iPad (Apple Pencil helps with the selection step but isn't required)
- Your artwork on a single layer with a transparent background (merge layers first if needed)
- A background layer you can hide, or set to a dark color, so the white outline is visible
Duplicate your project in the Gallery before merging layers, so your original layered file stays intact.
Step-by-Step: The Standard White Outline Method
1. Isolate and duplicate your artwork
Hide the background layer. Swipe left on your artwork layer and tap Duplicate. You now have two identical layers. The bottom one will become the outline shape, so make sure it sits below the original.
2. Fill the duplicate with white
Set your active color to white. On the bottom duplicate, tap the layer and choose Alpha Lock (or swipe right on it with two fingers). Tap the layer again and choose Fill Layer. Only the painted pixels turn white, leaving a flat white silhouette of your art.
Another route is Adjustments > Hue, Saturation, Brightness, with brightness at 100% and saturation at 0%. Alpha Lock plus Fill Layer is more predictable because it doesn't depend on the colors underneath.
3. Turn off Alpha Lock and blur
Switch Alpha Lock off. Open Adjustments > Gaussian Blur, select Layer, and drag your pencil to the right. Somewhere around 20-25% usually works. The blur needs to be strong enough that the soft white halo clearly extends past every edge of your art, including fine details like hair, thin lettering, and gaps between elements.
The blur amount largely controls the outline's final thickness and how much small gaps get bridged. Heavier blur means a thicker, smoother outline that fills in tight concavities.
4. Select the outline shape
Open the Selection tool and choose Automatic. Tap on the blurred layer, then drag your pencil left or right to adjust the selection threshold. Each approach is slightly different:
- Tap outside the blurred shape, drag the threshold all the way left (toward 0%) so everything but the outline is selected, then tap Invert.
- Or tap directly on the blurred white shape and drag to grow or shrink the selection until the edge sits where you want the outline to end.
A lower threshold gives a tighter outline hugging the art, while a higher one pushes the edge farther out. Make sure the selection has a small, even gap around your artwork rather than cutting into it.
5. Fill the outline on its own layer
With the selection active, create a new layer below your artwork. Tap its thumbnail and choose Fill Layer with white as your color. Then delete or hide the blurred duplicate. You now have a clean white sticker border on its own layer.
If you see tiny holes or notches, zoom in and patch them with a hard brush in the same white.
Smoothing the Outline for Cutting
The blur-and-select method produces a slightly bumpy edge when you zoom in. That's fine for screen use, but it can cause jittery cut paths on a Cricut or similar cutting machine. To clean it up:
- Pick a smooth monoline brush (the Monoline brush in Procreate's Calligraphy set works).
- Match the outline's color.
- Slowly trace along the outline's edge on the outline layer, painting over bumps and erasing any spurs.
For large sticker sheets, some artists use the quick method (blur and threshold on a merged sticker sheet) to get borders on everything at once, then hand-correct the edges. It's much faster than tracing each one, though results vary with brush hardness and opacity since the border follows your edge.
Variations Worth Knowing
Outlines in other colors
The same process works for any color. Fill the duplicate with your chosen color in step 2 (or fill the selection with it in step 5). Because the outline sits on its own layer, you can also Alpha Lock it later and recolor.
Adding a drop shadow to the sticker
To lift the sticker off the page:
- Duplicate the white outline layer and drag the copy to the bottom of the stack.
- Invert its colors (or fill it black) so it becomes a dark silhouette.
- Apply a Gaussian Blur at around 20%.
- Lower the layer opacity until the shadow looks natural.
Outlining text and lettering
Merge your lettering onto one layer and follow the same steps. For script lettering with tight counters, use enough blur to fill the gaps between letters so the outline reads as one continuous shape.
Common Problems and Fixes
- The outline is too thin or doesn't cover everything: Increase the Gaussian Blur or raise the selection threshold.
- The outline fills in details you want to keep: Lower the blur. Very heavy blur bridges gaps, which can swallow negative space like the gap between an arm and a torso.
- Soft or semi-transparent edges: The Automatic selection can pick up faint pixels. Lower the threshold and clean up manually.
- You can't see the outline: You're probably on a white background. Hide it or set the background to a dark color while you work.
- Edges look bumpy on export: Retrace with a monoline brush, or work at a larger canvas size so the blur steps are finer.
When Procreate Isn't the Right Place for the Outline
Procreate's method is destructive by nature. The outline is a baked pixel layer, so changing the thickness means redoing the blur and selection. That's fine for a printed sticker sheet. It's a bottleneck if your sticker is part of an animation, a lower third, a social asset, or anything that needs the outline to change over time or follow moving artwork.
For motion work, a common approach is to export the artwork from Procreate as a transparent PNG (or an image sequence if you animated it in Animation Assist) and build the outline in After Effects instead:
- Stroke layer style: Apply Layer Styles > Stroke, set the position to Outside, color to white, and adjust size. The outline stays live and keyframable.
- Simple Choker on a white matte: Fill a duplicate with white (Fill effect), then use Simple Choker with a negative value to expand the matte outward. This helps when you need rounder, more uniform sticker-style corners or want to bridge gaps in fine detail.
- Drop shadow or Gaussian Blur: Add these as additional effects, all adjustable per frame.
This keeps the outline resolution-independent in practice, since it's recalculated at your comp resolution rather than baked into a fixed canvas. You can change thickness, color, or shadow in seconds, or animate the border peeling in with the sticker.
Where Styleframe Fits in a Sticker-Style Workflow
If you're building sticker-style motion graphics rather than static stickers, outlines are only one piece. Styleframe is an AI video and motion tool built around artistic control, and a few of its tools line up with this kind of work:
- Remove Background gives you clean cutouts of subjects, which the outline methods above depend on. The cleaner the alpha, the better the blur-and-select or stroke result.
- Restyle and Ink-and-Paint are reference-driven style transfer, so you can push footage or stills toward a hand-drawn, sticker-like look using your own reference images instead of a text prompt alone.
- Frames-to-Video is keyframe-driven, which lets you define start and end frames of a sticker animation and generate the in-between motion, with iteration that doesn't overwrite earlier results.
- 4K Upscale lets you bring assets to production resolution before you build outlines, so edges stay crisp in your comp.
Styleframe exports image sequences, so the output drops into After Effects or Nuke, where you can add your outline, shadow, and final compositing as usual. An After Effects plugin is on the way. The aim is to keep your compositing pipeline intact, with generation driven by your references, clips, and keyframes rather than a one-click black box.
Quick Reference
Final Notes
The Procreate technique is reliable once you know the sequence: duplicate, fill white, blur, auto-select, invert, fill on a layer below. Tune the blur for thickness and the threshold for tightness, and smooth the edge if it's going to a cutting machine. When the sticker needs to move, change, or live in a larger composite, move the outline into After Effects so it stays editable.