How to Make Watercolor in Procreate
StyleFrame Team7 min read
To make watercolor in Procreate, start a canvas at 300 dpi, put a cold-press paper texture on a layer set to Multiply, and paint with transparent, low-opacity watercolor brushes in layered washes. Use clipping masks to keep color inside shapes, lift your Apple Pencil as little as possible to avoid hard overlaps, and use the Smudge tool to bleed edges into each other. Procreate approximates watercolor with brush behavior instead of simulating wet paper, so the realism comes from your texture, brush settings, and layer discipline.
What Procreate Can and Can't Do with Watercolor
Procreate's brush engine imitates how watercolor looks: transparency, pigment pooling, grainy edges. It doesn't simulate water physics. There's no real paper humidity, no timed drying, and no pigment that keeps migrating after you lift the pencil. Artists who want that dynamic behavior tend to look at dedicated simulation apps such as Rebelle or Expresii.
For most illustration and motion work, the brush approach is enough. You trade physical simulation for speed, undo, and layers, which is a good trade when the painting will end up as a texture, a matte painting, or an animated element.
Step 1: Set Up the Canvas
Watercolor depends on paper grain, so resolution matters more than usual.
- Size: Create a canvas at 300 dpi. For print-style work, 8.5 × 11 inches is a workable minimum. For video, match your delivery size and consider painting at 2× so you can scale or push in later.
- Color profile: Stay in RGB if the work is going into a video pipeline.
- Background: Keep a plain white or off-white layer at the bottom. Pure white works for the cleanest wash, and a warm off-white feels more like cotton paper.
Plan your layer structure before painting: paper texture on top, color layers in the middle, sketch or line art above the color layers, and a clean background at the base.
Step 2: Add a Paper Texture
Paper grain is what separates a watercolor from a soft airbrush. Import a high-resolution cold-press or hot-press scan, or use a seamless texture that you can tile to cover the canvas.
Two ways to use it:
- Texture on top: Place the paper image above all your paint layers and set the blend mode to Multiply. Lower the opacity until the grain shows through the washes without dirtying the whites. This gives you the most control, because you can swap or hide the texture without touching the paint.
- Texture inside the brush: Many watercolor brush packs use grain textures in the brush itself, so each stroke picks up tooth as it's laid down. This is helpful for scattered, uneven edges but harder to change later.
Many artists use both: a subtle brush grain plus a global Multiply texture.
Step 3: Choose or Build the Right Brushes
You can start with Procreate's built-in brushes, but a dedicated watercolor brush pack makes the process faster. Third-party sets from watercolor artists are widely used, and the usual structure is:
- Transparent round brushes for washes and layered color. Overlapping strokes darken where they cross, as real glazing does.
- An opaque "loaded" brush for details, accents, and highlights that need to cover what's underneath.
- Smudge brushes tuned for blending, which act like adding water to wet paint.
- Splatter and texture brushes for runs, drips, and edge blooms.
Tweak Brushes
If you want to build your own, open a brush's settings and check these areas:
- Apple Pencil pressure: Make pressure affect opacity, so light touches give pale washes and heavier ones build pigment.
Change one setting at a time and test on a scrap layer, because small adjustments often change the whole character.
Step 4: Sketch, Then Block in Light Washes
Draw a loose pencil sketch on its own layer, then lower its opacity. The tighter the drawing, the tighter the final painting, so keep the sketch minimal if you want an expressive result.
Block in color with a transparent round brush, working from light to dark just like physical watercolor:
- Start with the lightest, most diluted washes across large areas.
- Let strokes overlap. Because the brush is transparent, overlaps naturally create deeper tones and variation.
- Keep edges slightly loose, and let color wander outside the sketch in places. That looseness is a big part of the medium's appeal.
Step 5: Control Color with Clipping Masks
Painting a clean wash is hard when every lifted stroke leaves an overlap and every stray stroke needs erasing. Clipping masks fix both problems.
- Fill the shape you want to paint (a pumpkin, a leaf, a sky area) with a flat color on its own layer.
- Add a new layer above it and choose Clipping Mask.
- Paint on the clipped layer. Anything outside the fill below is hidden, and you can paint boldly without erasing.
- Repeat for each color area, using one layer per element when you can.
Keep a color swatch palette so you can eyedrop consistently. And when painting a single wash, try to keep the pencil down for the whole stroke. Lifting and restarting is what creates visible seams.
Step 6: Build Shadows and Depth
Add depth with more clipped layers on top of your base colors:
- Multiply shading: Create a new clipped layer set to Multiply and paint with the same hue as the base color. The shadows stay harmonious without needing a new color choice. You can use the same method for ambient light.
- Glazing: Layer transparent strokes over dry areas to deepen shadows gradually.
- Wet blending: Use a smudge brush at low pressure to pull dark pigment into lighter areas. This imitates dropping pigment into a wet wash and gives you soft bleeds and gradients.
- Edge darkening: Push pigment toward the shape's edges for the pooled-rim look of paint drying.
Step 7: Add Details, Highlights, and Splatter
Switch to an opaque brush for the final accents:
- Eyes, small marks, and crisp contours
- Highlights in white or a pale tint, applied sparingly
- Splatters and runs in the margin, which tie the painting to its paper and keep the piece from looking over-controlled
Be careful with details. Watercolor reads best when the focal area is tight and the rest stays loose. If everything is equally sharp, the painting loses its character.
Step 8: Finish with Texture and Color Adjustments
Put the final pass on the whole image:
- Check that your paper texture layer still looks right at the final opacity.
- Use color adjustments on a group to correct color. Watercolor can look dull on screen, so a small saturation lift may help.
- Add subtle grain if the image looks too clean next to your footage.
- Export a flattened image for stills, or a layered file if you need to separate elements later.
Taking Watercolor Into Motion
If you work in After Effects, Premiere Pro, or Nuke, a watercolor painting is often an ingredient rather than the final product. A few practical approaches:
- Frame-by-frame animation: Draw a handful of variations of the same painting and cycle through them for a boiling, hand-made look. Export a quick test to check the timing.
- Layered elements: Export your layers and animate them in After Effects with parallax, displacement, or camera moves. Keep paper texture on its own layer so it stays locked to the frame while the paint moves.
- Stills as texture: Use washes and splatters as mattes, overlays, or transitions with blend modes in your compositor.
Where Styleframe Fits
Painting every frame by hand is slow. This is where an AI video tool with real artistic control can extend the work you already made. You could take a Procreate watercolor as a style reference and use it to carry that look onto footage, or animate between keyframes you painted yourself.
Common Mistakes to Avoid
- Painting on one layer: You lose the ability to fix a wash without redoing everything.
- Over-blending: Too much smudging makes the result look like airbrushing. Leave some hard edges.
- Ignoring paper texture: Without grain, even good brushwork looks digital.
- Too much opacity: If strokes cover each other completely, the transparency that defines watercolor disappears.
- Working too small: Low resolution makes the paper grain look muddy once scaled in a video timeline.
Quick Checklist
- Canvas at 300 dpi, sized for your delivery.
- Paper texture on a Multiply layer.
- Transparent brushes for washes, an opaque brush for details.
- Clipping masks for each color area.
- Multiply layers for shadows and glazing.
- Smudge tool for wet bleeds, with some hard edges kept.
- Splatters and a few loose marks outside the sketch.
- Export layers or sequences for After Effects, Nuke, or another comp tool.
Procreate won't simulate wet paper, but with a good texture, a thoughtful brush setup, and clean layer habits, you can produce watercolor that holds up in print and on screen, and give your motion work a hand-painted base to build on.