How to Make Watercolor Brush Procreate
StyleFrame Team8 min read
To make a watercolor brush in Procreate, duplicate a soft painting brush or start a new one in Brush Studio, then give it a bleeding, irregular shape, a paper-like grain (such as Clouds) set to texturized, and Wet Mix settings that let pigment dilute and blend with the canvas. Add low spacing, light stabilization, and pressure-driven opacity and size so strokes build in translucent layers instead of stamping down opaque dots. Test it on a paper-textured canvas, adjust one setting at a time, and save it as a named brush. The steps below cover each setting and a starting value, plus how to carry the look into a motion pipeline.
What You Need Before You Start
- Procreate on an iPad, ideally with an Apple Pencil. Pressure and tilt response are a large part of what makes a watercolor brush feel right.
- A canvas with a paper texture, either a scan of cold-press watercolor paper or a texture layer set to Multiply. A brush tested on flat white will look different from one tested on paper.
- A willingness to iterate. Brush Studio has dozens of interacting settings, so change one thing, paint a test stroke, and compare.
Menu labels shift slightly between Procreate versions, but the structure is the same: Brush Library, then Brush Studio, then settings grouped by Stroke Path, Stabilization, Taper, Shape, Grain, Rendering, Wet Mix, Dynamics, Apple Pencil, and Properties.
Step 1: Pick a Starting Point
You have two options.
Duplicate an existing brush. Open the Brush Library, find a soft brush such as one of the gouache or painting brushes, swipe left on it, and choose Duplicate. Editing a copy leaves the original intact. This is the faster route, and it works well when the default watercolor brush feels too dry or streaky for your taste.
Create a new brush from scratch. Tap the + icon in the Brush Library to open Brush Studio with a blank default brush. You control everything, but you also have to set everything, so expect more experimenting.
If you're new to Brush Studio, duplicate. You inherit sensible pressure and rendering behavior and only need to change what makes the brush look like watercolor.
Step 2: Set the Shape for Soft, Irregular Edges
The shape is the stamp the brush repeats along your stroke. Real watercolor edges are uneven and slightly blooming, so a perfect circle won't work.
- Open the Shape section and tap Edit.
- Tap Import and choose Source Library.
- Pick a loose, organic shape. Ink-style and bleed-style shapes from the built-in library are good starting points, since they have broken, irregular edges.
- Tap Done.
You can also draw your own shape on a square black canvas with white marks, then import it from Photos or paste it. A hairy, uneven mark mimics a loaded round brush well. Blur it slightly first, since hard edges read as dry media.
If you're using an Apple Pencil Pro, enable the barrel roll and azimuth options in the shape settings so rotating the pencil rotates the tip.
Step 3: Add a Paper-Like Grain
The grain is the texture that shows through inside the stroke. For watercolor, it simulates pigment settling into paper tooth.
- Open Grain and edit the Grain Source.
- Import a soft, cloudy texture from the Source Library (Clouds is a common choice), or import a seamless paper texture of your own.
- Set the grain behavior to Texturized rather than Moving. Texturized grain stays fixed to the canvas like paper, while moving grain slides with the stroke and looks like a pattern dragged across the surface.
- Raise Depth to roughly 75% as a starting point, then adjust to taste.
If you import your own texture, make it seamless. Otherwise the tile edges show up as straight lines in your strokes. Procreate offers an auto-repeat option in the grain editor to help.
Step 4: Configure Stroke Path and Stabilization
These settings control how the brush lays down the shape along your motion.
- Spacing: Reduce it toward the low end so strokes read as continuous washes rather than dotted stamps.
- Streamline: A moderate value (around 50%) smooths hand wobble and gives fluid, confident strokes.
- Jitter: A small amount adds slight positional variation, which keeps edges from looking mechanical. Too much makes the edge noisy.
Stabilization is a matter of preference. Some artists leave it off for the most responsive feel. Others add a little to keep long washes steady.
Step 5: Tune Taper for a Natural Brush Tip
Taper makes strokes thin out at the start and end, like a real brush lifting off paper.
- Open Taper and adjust the pressure taper and touch taper curves so the ends narrow gradually.
- Turn on Link Tip Sizes if you want the start and end tapers to match.
- Increase the tip size so the taper is visible across a full stroke.
A pointed, slightly asymmetric taper is a quick way to make a brush feel less like a digital marker.
Step 6: Set Wet Mix, the Setting That Makes It Watercolor
Wet Mix controls how the brush interacts with paint already on the canvas. This section does most of the work of making a stroke feel wet.
- Dilution: Higher values thin the paint and let the brush pull in what's underneath. Try starting around 70%.
- Charge: Controls how much paint the brush carries as you move. A lower value, around 30%, lets the stroke fade as it travels, like a brush running out of pigment.
- Attack: Determines how quickly the wet effect applies at the start of a stroke. Moderate values keep the beginning of the stroke from looking abrupt.
- Pull and Grade: These affect how paint drags along and how the blending gradient behaves. Adjust them in small steps. They change the character of the brush noticeably.
- Blur and Wetness jitter: Small amounts add the uneven edge variation that real wet-on-wet blending creates.
These values are starting points, not rules. A brush for broad sky washes wants higher dilution and a larger size, while a detail brush wants lower dilution and tighter control.
Step 7: Add Pressure and Color Dynamics
Under Apple Pencil and Dynamics, link pressure to opacity and flow so light pressure gives pale, translucent strokes and heavy pressure gives richer pigment. Linking pressure to size is optional and depends on the brush.
In Color Dynamics, small jitter values help:
- Hue jitter: a few percent at most.
- Saturation jitter: around 10% adds the slight variation you get from uneven pigment load.
- Brightness jitter: a touch makes some strokes lighter.
Keep these subtle. Watercolor variation is gentle, and heavy color jitter looks like a rainbow effect.
Step 8: Test, Refine, and Save
Paint a test sheet on your paper-textured canvas:
- A single long stroke at light, then heavy, pressure.
- A flat wash across a wide area.
- A second stroke overlapping the first, to check blending.
- A wet stroke dragged into a dry one, to see how edges behave.
Then adjust:
Once it feels right, open About this brush, name it, and add a sample stroke.
Step 9: Consider a Two-Brush Combination
For richer results, Procreate lets you combine two brushes in one. One brush handles the main shape and wet behavior, and a second layers extra grain, such as a cloud-like texture, over it. This takes more experimentation, but it can produce edge and interior variation that a single brush struggles to get. Build and save each brush separately first, then combine them in Brush Studio.
Bringing a Procreate Watercolor Look Into Motion
A custom brush is a still-image tool, and motion work raises a different question: how do you keep that hand-painted quality across many frames? Painting every frame is slow, and a static texture laid over moving footage often looks like a filter.
Some practical ways to bridge that gap:
- Paint key frames, not every frame. Use your brush to paint a handful of style frames, which become the visual target for the piece.
- Build texture plates. Paint washes, bleeds, and edge details on separate layers, export them as PNGs, and use them in After Effects or Nuke as mattes, overlays, or displacement sources.
- Animate the paint behavior. Exporting layers lets you animate reveals, boiling edges, and wet-edge growth with expressions or frame-hold effects in your compositor.
This is where Styleframe, an AI video and motion tool built for artistic control, can sit beside your painting work. You can use your Procreate frames as references so footage or renders adopt the painted look you defined. Results still depend on the quality and consistency of your references, so plan to review and refine.
From there, bring the results into your existing After Effects or Nuke comp, where you handle grading, paper-texture overlays, and final polish.
Common Mistakes to Avoid
- Testing on a white canvas only. Paper texture changes how every setting reads.
- Changing many settings at once. You won't know which change helped.
- Using a non-seamless grain. Tile edges will show as lines.
- Over-jittering. Subtle variation reads as organic. Heavy variation reads as noise.
- Skipping saved versions. Duplicate your brush before big experiments so you can return to a version that worked.
Final Notes
A convincing watercolor brush in Procreate comes down to four things: an irregular shape, a texturized paper grain, Wet Mix settings that let paint dilute and blend, and pressure dynamics that reward a light touch. Start from a duplicated soft brush, change one setting at a time, and keep a test sheet on paper-textured canvas. Once the brush behaves, you can use it to paint style frames and texture plates that feed your motion pipeline, with the painted look carried through your compositing tools.