How to Make Watercolor Background in Procreate
StyleFrame Team8 min read
To make a watercolor background in Procreate, create a large canvas, lay in soft color washes with a wet-media brush on separate layers, and blend the edges with a textured smudge or blur. Add blooms, splatter, and salt-style texture, then place a paper texture on top set to Multiply. For motion work, build it at 3840×2160 or larger and export a flattened PNG or a layered PSD so you can animate it in After Effects.
Before you start: set up the canvas for video use
Many Procreate watercolor tutorials use a square canvas for prints or social posts. For a background that will end up in a comp, start from the delivery format instead.
- Canvas size: 3840×2160 px for a UHD background. If you plan to push in, pan, or parallax the plate in After Effects, go larger, such as 5000×3000 or more.
- Color profile: Choose the profile that matches your comp, and decide up front so colors don't shift when you import into your project.
- Layer plan: Think in three groups: color washes, texture and splatter, and paper grain. Keeping them separate lets you rebalance or animate each one later.
Create the canvas from the Gallery with the plus button and enter your pixel dimensions.
Step 1: Lay down the base washes
Watercolor reads as watercolor because of transparency and layered pigment, so avoid opaque fills.
- Fill the background layer with off-white rather than pure white. A warm or cool white gives the paper a tone that sits better under color.
- Add a new layer for each color family: a cool blue-green, a warm ochre, and a muted pink, for example. Use a limited palette of three to five hues so the background supports foreground graphics instead of competing with them.
- Pick a watercolor, wash, or wet-media brush. Procreate's built-in brushes work for this, and third-party sets add more realistic edge behavior. Increase the brush size so each stroke covers a large area, and keep the color opacity low.
- Paint broad, overlapping strokes. Let colors meet and overlap instead of blending them straight away. Overlaps are where the transparent, layered look comes from.
Set some layers to Multiply. Multiply darkens where washes overlap the way real glazes do, and it stops the colors from turning muddy as quickly as Normal mode does.
Step 2: Build soft edges and wet-on-wet blending
Real wet-on-wet watercolor has soft, feathered transitions in some places and crisp pooled edges in others. Procreate has no true paint-flow simulation, so you create this variety by hand.
- Use the Smudge tool with a soft or textured brush at moderate pressure to pull one wash into the next. Textured smudge brushes leave a more organic edge than a plain soft round.
- Apply a Gaussian Blur (Adjustments) to a single wash layer for a diffuse, out-of-focus bloom. Keep it to a few layers, because blurring everything makes the result look like a gradient mesh.
- Leave some edges hard. Where a wash dried before the next one arrived, a darker line forms at the boundary. You can fake it by locking the layer with Alpha Lock and painting a slightly darker tone along the edge, or by duplicating a layer, darkening it, and erasing the interior.
Vary your pressure and stroke speed. Uniform strokes are the quickest way to make a digital wash look digital.
Step 3: Add blooms, backruns, and pigment texture
A flat wash looks clean but not convincing. The small imperfections in real watercolor are what sell it.
- Blooms and backruns: Use a bloom or water-drop brush, or a textured eraser, on a new layer to lift lighter, cauliflower-shaped shapes out of a wash. Alternatively, paint a lighter-valued blob and soften only its inner side.
- Salt and granulation: Stamp a speckled or grainy brush with a light color or erase through a layer to simulate salt texture. Keep it sparse.
- Splatter: Use a splatter brush on its own layer so you can adjust density and opacity independently. Large, random drops with a few tiny ones look more natural than evenly sized specks.
- Darker accents: Place a few concentrated pigment areas where the wash would naturally pool, usually near edges and corners.
Because Procreate approximates watercolor with brushes rather than simulating water and paper absorption, the best results come from restraint. A few well-placed effects beat a canvas full of them.
Step 4: Add a paper texture
The paper grain is what makes a digital wash feel like it sits on cold-press paper.
- Import a watercolor paper texture photo or image using Actions > Add > Insert a Photo. Many free and paid paper textures exist, and some come with stains and backrun effects built in. If you use one, check the license for commercial work.
- Scale it to fill the canvas, and move it above all your paint layers.
- Set the blend mode to Multiply. If the effect is too heavy, lower the layer opacity.
- Adjust the grain scale with the Transform tool. If it looks too fine at 4K, scale it up. Grain that looks right on a small canvas often disappears at full video resolution.
- Use Curves (Adjustments) on the texture layer to increase or reduce contrast.
If you don't have a texture file, you can make one: paint over a blank canvas with a grainy brush in light gray, zoom out for even coverage, and use that layer as your paper. It won't match a scanned sheet, but it works as a starting point.
Keep the paper on its own layer. In After Effects you can then hold the grain static while the pigment moves under it, which looks more like real paper than grain that slides with the paint.
Step 5: Avoid the canvas-edge problem
Procreate crops anything that extends past the canvas boundary, so washes that bleed off the edge can end up with awkward hard cutoffs. Two simple fixes:
- Paint on a canvas slightly larger than your final frame, then crop down with Canvas > Crop & Resize.
- If you need extra room for camera moves in your comp, keep the larger version as your master plate and deliver the cropped version for stills.
Step 6: Export for your motion pipeline
- Flattened PNG: The quickest route for a static background plate.
- Layered PSD: Best if you want to animate or recolor groups separately in After Effects. Check that blend modes carried over correctly.
- TIFF or high-quality PNG if you want to avoid compression artifacts in gradients. Soft watercolor gradients are prone to banding, so check your export at full size.
If banding appears in After Effects, adding a light layer of noise or grain over the final comp usually hides it. Working in 16 bpc or 32 bpc helps too.
Bringing the background to life in After Effects
A static watercolor plate is useful, but motion designers often want it to feel alive. Some approaches that keep the hand-painted look:
- Slowly scale or drift the plate with subtle parallax between wash, splatter, and paper layers.
- Apply Turbulent Displace at a low amount with a slow evolution to give the edges a gentle flow.
- Animate layer opacity on the bloom and splatter layers to suggest pigment spreading.
- Keep the paper layer static with Multiply on top for the sense of a fixed sheet.
Over-animating is the most common problem. Watercolor works because it looks still and handmade, so small, slow movement usually reads better than obvious effects.
Where Styleframe fits in this workflow
Procreate is where you control the look of a single frame. If you need that look to move, can extend it without replacing your After Effects or Nuke compositing.
- Frames-to-Video: Paint two or three watercolor background states in Procreate and use them as keyframes. Styleframe generates the motion between them, so the wash can shift from one palette to another while staying close to your artwork.
- Restyle and Ink-and-Paint: These are reference-driven style transfer tools. Use your Procreate watercolor frame as the reference to apply a painted look to existing footage or renders, instead of describing it in text and hoping for a match.
- Remove Background and 4K Upscale: Isolate a subject to composite over your watercolor plate, and upscale finished output to production-ready 4K.
Every generation is driven by your references, clips, and keyframes, and iteration is non-destructive, so you can adjust one input and try again without losing earlier versions. Output comes out as image sequences, which drop into your existing After Effects or Nuke comp, and an After Effects plugin is on the way.
Common mistakes to avoid
- Working too small. A background that looks great at 2000 px often falls apart when scaled up to 4K. Start at delivery size.
- Using opaque colors. Heavy, flat coverage kills the glazed look. Keep opacities low and build up.
- Blurring everything. Soft edges need hard-edge contrast to look like paint.
- Letting the paper texture shift with the paint. Keep it as a separate fixed layer.
- Ignoring color management. Check how your export looks in your comp before building on it.
FAQ
Can Procreate simulate real watercolor behavior? Not fully. It approximates the look through brushes, blend modes, and textures, but it doesn't simulate water flow, drying time, or paper absorption. Good results come from layering and careful edge work.
What blend mode works best for watercolor layers? Multiply is the usual choice, since it mimics transparent glazing and keeps overlaps rich.
What size should I use for video? At least 3840×2160 for UHD delivery, larger if you plan camera moves or crops.
Can I animate the result directly? You can export a layered PSD and animate the pieces in After Effects, or use a tool like Styleframe to generate motion from keyframed watercolor states.