How to Make Trees in Procreate
StyleFrame Team8 min read
To make a tree in Procreate, sketch the trunk and branch structure on its own layer, block in the trunk with a base color, then build the canopy as three layered masses of dark, mid, and light green. Finish with a textured brush for leaf detail and clipping masks for light and shadow. Keeping trunk, foliage, and shading on separate layers makes the tree easy to revise, recolor, and reuse in a larger scene or animation.
What You Need Before You Start
You don't need custom brush packs. Procreate's stock library covers everything below:
- A hard round brush for structure: Studio Pen or a 6H pencil works well for trunk lines and branch silhouettes.
- A soft brush: Use it for atmospheric gradients and blending light into shadow.
- A textured organic brush: Procreate's Organic set (Rainforest, Snow Gum, and similar brushes) scatters leaf-like marks quickly. A dry brush or stipple brush also works.
- A small palette: Aim for one dark, one mid, and one light value in each hue family, plus a warm accent for highlights.
If you plan to use the tree in a video project, choose your canvas size now. A canvas around 3000 × 2000 px is a comfortable general-purpose size. If the tree will be animated or composited, work larger than your delivery resolution so you can scale or reframe later without softening the edges.
Step 1: Set Up Your Canvas and Layers
Start with a clean layer structure, because it determines how editable the tree is later:
- Background: a flat color or simple gradient.
- Sketch: low opacity, for the structure.
- Trunk: the base color for the trunk and branches.
- Foliage back, mid, and front: three separate layers for the canopy.
- Light and shadow: clipping mask layers that sit above the trunk and foliage.
Name your layers. It feels tedious for a single tree, but it pays off when you're working on a forest of them.
Step 2: Sketch the Trunk and Branch Structure
Trees look wrong most often because the skeleton is wrong. Before adding detail, get the structure right.
- Taper the trunk. It should be thickest at the base and narrow as it rises. A slight flare at the roots gives the tree weight.
- Break symmetry. Branches should not mirror each other. Alternate sides, vary the angles, and let some branches come toward the viewer while others recede behind the trunk.
- Use the rule of thinning. Each time a branch splits, the resulting branches should be thinner than the parent. This one habit makes a sketch read as a tree.
- Add a lean or curve. A perfectly vertical trunk looks like a pole. Even a subtle S-curve adds life.
Draw at roughly 70% pencil opacity so you can layer strokes. Where you're confident in a line, draw over it again to darken it. Lighter, overlapping marks are easier to correct than a single hard line, and you won't need to erase constantly.
Procreate's QuickShape and Drawing Guides are not much help here. Organic forms benefit from a loose hand, so draw freehand and resist the urge to tidy up.
Step 3: Block In the Trunk With Value
Create a new layer under your sketch and fill the trunk and branch silhouette with a mid-dark brown or gray-brown. Pure black or saturated brown tends to look flat, so shift toward a slightly desaturated tone.
Then turn on Alpha Lock for the trunk layer or add a clipping mask above it. This confines your painting to the trunk shape and lets you experiment freely.
Next, establish the light direction. Pick a side for the light source and keep it consistent across the whole tree:
- Paint a darker brown down the shadow side of the trunk and under each branch.
- Add a lighter, warmer tone along the lit edge.
- Use a textured brush with vertical strokes to suggest bark. Short, broken lines following the trunk's curve read better than crosshatching.
Leaving a faint sketch layer visible beneath the color is a useful trick. It adds subtle tonal variation for free and shows you where to push darks and lights.
Step 4: Build the Canopy in Masses, Not Leaves
The most common beginner mistake is painting individual leaves. A canopy reads as a set of clustered shapes, each with its own light and shadow.
- Back layer (darkest): On the lowest foliage layer, use a textured brush at a large size and dab in the overall silhouette with a deep green. Let the shapes overlap the branches so some limbs vanish behind the leaves.
- Middle layer (base color): On a new layer above, dab in a mid green over most of the same area, leaving some of the dark layer showing at the edges and underneath clusters. This creates natural depth.
- Front layer (lightest): On the top layer, add a light, slightly yellow-green only on the surfaces facing the light, such as the tops and upper-left edges of each cluster.
Dab rather than drag. Tapping the brush produces leaf-like marks, while dragging produces scribbles. Vary your brush size between large masses and smaller breakup marks at the edges so the silhouette isn't a smooth blob.
Keep the silhouette irregular. Gaps where sky shows through make a tree feel airy and real. You can erase small holes with a textured eraser, using the same brush you painted with.
Step 5: Add Texture and Detail
With masses in place, refine:
- Edge variation: Use a small, hard brush to flick a few leaves outside the main silhouette. Stray leaves break up the outline.
- Color temperature shifts: Add a few touches of warmer green or yellow in the sunlit areas and cooler blue-green in shadow. Slight hue variation does more for realism than extra detail.
- Trunk-to-canopy connection: Paint a few shadow shapes from the canopy falling onto the trunk and branches. This ties the two parts together.
- Roots and ground contact: Add a small cast shadow and a few grass strokes at the base so the tree sits in the scene instead of floating.
Resist overdetailing. A viewer reads form from value structure first, and the finest marks matter least.
Step 6: Light, Atmosphere, and Depth
Use new layers set to clipping mode for the finishing passes:
- Multiply layer with a soft brush in a cool purple-blue for shadow pools beneath clusters.
- Add or Overlay layer with a warm yellow for a rim of sunlight along the light side.
- Gaussian Blur on background trees only. Blurring distant trees and lowering their contrast gives atmospheric perspective.
For a landscape with several trees, make distant trees lighter, bluer, and less contrasty, and keep foreground trees darkest with the most detail. Duplicating one tree and recoloring it with Hue, Saturation, Brightness adjustments is a fast way to populate a forest, though vary the scale and flip some copies horizontally to avoid obvious repetition.
Variations Worth Practicing
- Pine or conifer: Draw a straight central trunk, then build tiered, drooping branch layers that get wider toward the base. Use a jagged, downward-flicking brush stroke for needles.
- Bare winter tree: Skip the canopy and focus on branching logic. Use a thin, pressure-sensitive pen and keep tapering the branches until they become fine twigs.
- Palm tree: Curve the trunk and add ring marks along it. Build fronds as arcing, tapered shapes radiating from a single crown.
- Stylized or flat-vector style: Use solid shapes with a single shadow tone, no texture, and clean edges. This style is easy to animate because the shapes are simple.
Make Reusable Tree Assets
If you'll paint more than one tree, build a small library:
- Keep each tree on its own group with trunk, foliage, and light layers.
- Export a transparent PNG of each tree, or export the whole file as a layered PSD for After Effects or Photoshop.
- Create a custom stamp brush from a leaf cluster for fast canopy building. In Brush Studio, import a cluster as the shape source and adjust spacing and scatter.
Layered PSD export is especially useful for motion work, because you can animate foliage and trunk separately, for example swaying the canopy while the trunk stays still.
Taking Procreate Trees Into Motion
Procreate's Animation Assist can make simple frame-by-frame loops, such as leaves rustling. For more involved shots, many motion designers paint the still in Procreate and bring it into their usual compositing tools.
is an AI video and motion tool that can help extend a painted tree into moving footage, using your own artwork as reference.
Common Mistakes to Avoid
- Painting everything on one layer. You lose the ability to adjust color, light, or animation later.
- Symmetrical branches. Real trees are irregular. Break your own patterns.
- Uniform green. Vary hue and value across the canopy.
- Hard, even silhouette edges. Add gaps and stray leaves.
- Inconsistent light direction. Decide once, then follow it on trunk, foliage, and ground shadows.
- Too much detail too early. Get value structure and silhouette right before refining.
Quick Recap
- Set up separate layers for sketch, trunk, foliage, and light.
- Sketch a tapered, asymmetrical trunk and branch structure.
- Block in the trunk, then shade with Alpha Lock or clipping masks.
- Build the canopy in dark, mid, and light masses using dabbed texture brushes.
- Add edge variation, color temperature shifts, and cast shadows.
- Export as layered PSD or transparent PNG for reuse and animation.
Once the fundamentals are in place, trees become one of the fastest elements to paint, and a well-organized file gives you the flexibility to restyle, animate, or composite them wherever your project needs.