How to Make Tie Dye in Procreate
StyleFrame Team8 min read
To make tie dye in Procreate, fill a square canvas with a few bright color blocks, merge them into one layer, and drag them into spirals with the Liquify tool (Twirl Right, then Crystals for fabric-like folds). Add a thin white "resist" line texture and a light noise layer, then use a clipping mask to apply the result to lettering or shapes. For motion work, export the finished piece at high resolution and animate it in After Effects with Twirl, Turbulent Displace, and hue keyframes.
What You Need Before Starting
You only need stock Procreate tools. Custom brushes help but aren't required.
- Procreate on iPad, with an Apple Pencil for pressure-sensitive control (finger works for Liquify).
- A square canvas. Tie dye reads best as a radial pattern, and square canvases keep the spiral centered. For video use, 4096 × 4096 px gives you room to crop, scale, and push into the texture in After Effects. Check your device's maximum layer count at that size, since big canvases limit layers.
- A palette of three to five saturated colors. Four is a good start: for example green, yellow, pink, and purple. Adjacent hues blend into clean gradients; opposites (like green and pink) can turn muddy where they meet.
Set the color profile to RGB (sRGB) if you plan to bring the result into a video timeline, so colors stay consistent between Procreate and After Effects.
Step 1: Block Out the Color Fields
Start with flat color. The goal is large, clean areas that Liquify can smear into gradients.
- Open a new square canvas and turn on Actions (wrench) > Canvas > Drawing Guide > Edit Drawing Guide. Choose the 2D Grid and set the grid size large enough that the canvas divides into four quadrants.
- Use Selection > Rectangle (Add mode) to fill each quadrant with a different palette color. Dragging a selection fills it with the active color.
- For a more organic base, skip the grid and paint broad bands or wedges with a hard round brush. Wedges radiating from the center give you a more classic "folded and tied" structure.
Keep each color block large. Small, busy shapes produce noise instead of swirls.
Step 2: Merge and Keep a Backup
Merge the color layers into one, then duplicate it. Hide the original and work on the copy. Liquify is destructive, so a clean backup lets you restart the distortion without repainting the base. You'll use this backup repeatedly when testing different swirl strengths.
Step 3: Warp the Colors with Liquify
This is the step that does most of the work.
- With the duplicate selected, open Adjustments > Liquify.
- Choose Twirl Right, increase the brush size to roughly a third of the canvas, and set pressure and distortion to a moderate level.
- Place your finger or pencil at the center of the canvas and hold. The colors will wind into a spiral. The longer you hold, the tighter the spiral.
- Switch to Push with a smaller size to pull individual colors outward along the spiral arms, which helps if one color is getting swallowed.
- For crinkled, fabric-like detail, switch to Crystals and tap around the outer edges of the pattern. This creates the jagged folds you see where real cloth bunches up.
Two or three spiral centers look more convincing than one perfect swirl. Try a large Twirl Right at the center, then a smaller Twirl Left offset to one side. Real tie dye is rarely symmetrical, and a bit of imbalance sells the effect.
If a result looks too smooth, step back with undo and reapply with lower distortion. Overworking Liquify tends to blur colors into a gradient wash with no visible structure.
Step 4: Add Resist Lines and Fabric Texture
Raw Liquify output looks like a digital gradient. Real tie dye has pale lines where string or rubber bands blocked the dye, plus a woven texture underneath.
Resist lines
- Create a new layer above the swirl.
- With a small textured brush (a dry-media or chalk-style brush works well), draw thin white or off-white lines following the spiral arms.
- Lower the layer opacity to somewhere around 30–50%, and consider setting it to Overlay or Soft Light so the lines tint rather than cover.
- Apply a slight Gaussian Blur to this layer, since dye bleeds into the resist area.
Fabric grain
- Add another layer, fill it with mid-gray, and apply Adjustments > Noise Effects > Noise.
- Set the layer to Overlay or Multiply at low opacity.
- Optionally add a texture brush or a cloth photo set to Multiply for visible weave.
Step 5: Alternative Method: Build a Tie Dye Brush
If you want to paint tie dye by hand instead of warping a base, you can modify a standard brush in Brush Studio.
- Duplicate a textured brush (a calligraphy-set brush with built-in grit works well) into your own set.
- Increase Spacing so gaps appear between marks, mimicking folded cloth.
- Turn Scatter and jitter off, and set rotation to Follow Stroke so marks run along your path.
- Flatten the shape slightly so each mark looks like a pinched fold rather than a round dot.
- Paint in concentric rings, one color at a time, and let overlapping areas build up the blends.
This is slower and gives you more control over each ring. Liquify is faster and looks more fluid. You can also combine them: paint rings with the brush, then twirl them for extra movement.
Step 6: Apply Tie Dye to Lettering or Shapes
To fill type or illustrated shapes:
- Hide the tie dye layer and create a new layer for your lettering or shape.
- Draw or write the shape in any solid color.
- Move the tie dye layer above it and set it as a Clipping Mask.
- Duplicate and scale the clipped layer to show different regions of the pattern in different letters.
To explore variations, use Adjustments > Hue, Saturation, Brightness on the clipped layer. Shifting hue gives you an entire alternate colorway without repainting anything.
Step 7: Export for Motion Work
How you export depends on where the artwork is going next.
- Layered PSD if you want to animate pieces separately in After Effects, such as the resist-line layer and color layer.
- PNG for a flat texture you'll map onto geometry or use as a background.
- Keep the highest resolution you can. Textures that get scaled or twirled in a comp lose sharpness quickly.
Animating Your Tie Dye in After Effects and 3D Tools
A static tie dye image becomes much more useful once it moves.
In After Effects
- Apply Twirl to an adjustment layer or the texture itself and keyframe the angle for a slow, hypnotic rotation.
- Add Turbulent Displace with an evolving value to make colors drift as if the dye is spreading.
- Keyframe Hue/Saturation > Master Hue for a continuous color cycle.
- Use the texture as a track matte or a fill inside text layers for kinetic typography.
In 3D and compositing
- In Cinema 4D or Blender, use the PNG as a base color texture on a cloth or garment mesh. A roughness variation based on your grain layer helps it feel like fabric.
- In Nuke, the image works well as a plate for STMap or IDistort workflows when you need to drive a warp from a separate motion source.
Where Styleframe Fits in a Tie Dye Workflow
Procreate is the right tool for authoring the look: a hand-controlled texture where you decide every swirl and color. Where it stops is motion. Liquify is a still-image tool, so animating the pattern's evolution means either manual effects in After Effects or exporting multiple frames by hand.
Styleframe is an AI video and motion tool built around artistic control, and it can extend a finished Procreate piece in a few practical ways:
- Frames-to-Video: Create two or three tie dye states in Procreate (tight spiral, loose spiral, shifted palette), then use them as keyframes. Styleframe generates the motion between them, guided by your frames rather than a text prompt alone.
- Restyle and Ink-and-Paint: Use your tie dye artwork as a style reference to carry its color and texture onto existing footage or animation, using reference-driven style transfer.
- Remove Background and 4K Upscale: Isolate a tie dye lettering element cleanly, or bring a generated clip up to production-ready 4K.
Every generation is driven by your references, clips, and keyframes, and iteration is non-destructive, so you can revisit earlier versions without losing work. Output exports as image sequences, so it drops into your existing After Effects or Nuke comp, which suits pipelines where compositing stays in your hands.
If all you need is a static texture, Procreate alone is enough. Styleframe becomes useful when the tie dye needs to move or transfer onto other material under your direction.
Common Problems and Fixes
Colors look muddy. Avoid mixing complementary colors directly side by side, or insert a lighter transitional color between them. Reduce Liquify distortion so colors don't over-blend.
The spiral looks too perfect. Add a second twirl off-center, vary your pressure, and break symmetry with Push in a few spots.
The result looks flat and digital. Add resist lines, noise, and a subtle texture layer. These three details do more for realism than any amount of extra warping.
Banding in gradients. Add a fine noise layer at low opacity. It helps break up banding.
Pattern gets soft when animated. Export at the largest practical size and, if needed, upscale before compositing rather than scaling up inside the timeline.
Quick Recap
- Create a square canvas with a limited, saturated palette.
- Block out large color fields.
- Merge, duplicate, and keep a backup.
- Warp with Liquify using Twirl Right, Push, and Crystals.
- Add resist lines and fabric noise.
- Clip the result into type or shapes if needed.
- Export at high resolution and animate in your compositing tool.
Once you have the Procreate workflow down, producing multiple colorways and animation-ready variations becomes much quicker.