How to Make Things Glow Procreate
StyleFrame Team8 min read
The fastest way to make things glow in Procreate is Adjustments → Bloom, which adds an atmospheric glow to a layer or the whole canvas. For more control, paint on a dark background, duplicate your bright shape, color the copy, apply Gaussian Blur, and set the blurred layers to Add, Overlay, or Color Dodge underneath a white core. Bloom is quicker, and the layered method lets you steer the color, falloff, and placement of each glow.
Start With a Dark Background
Glow is a contrast effect. A light source reads as luminous because the surrounding area is darker, so set up the canvas before touching any glow settings.
- Darken the background layer, or lay a dark color over the artwork. A deep blue, purple, or desaturated version of your glow color works well.
- If you're adding glow to an existing illustration, drop a layer above it filled with a dark tone and set it to Multiply to push the scene down. Then paint your light sources on top.
- Keep the glowing elements bright and saturated, since there is little headroom left to brighten otherwise.
Compositors will recognize this: you're working in a low-key image so the added light has room to spread.
Method 1: Use Bloom for a Fast Global Glow
Bloom is Procreate's built-in glow tool. Tap Adjustments, choose Bloom, then touch and drag on the canvas to set the effect.
Choose the target. Bloom can apply to the active layer or to the whole canvas.
Amount. Sliding your finger or pencil sideways changes the Bloom percentage. At low values only the brightest areas of the image emit a glow. As you increase it, the effect reaches into darker areas, so a gentle value lets just the highlights bloom.
Transition. This controls which tones receive the effect. At 0%, Bloom applies across all tones. Raising Transition reduces the effect on shadows and midtones so only highlights glow. For a lamp, neon sign, or moon in a dark scene, push Transition higher so the dark areas stay clean.
Size. This sets the size and softness of the glow edges. Small values give a tight halo and large values give a diffuse haze.
Burn. This sets the intensity of the glow. A high Burn pushes the bloom toward a hot, overexposed look, which suits neon and sci-fi lighting.
To commit, tap the Adjustments icon again to leave, or tap the canvas and choose Apply to stay inside Bloom for another pass.
Bloom is the right choice when you want atmosphere on a finished image. Its drawback is that it acts on tonal values, not on artistic intent. If you need a specific object to glow in a specific hue, or want the glow to wrap around form, the layered method is better.
Method 2: The Layered Glow (Core, Color, Blur)
This is a technique many Procreate artists use. It follows how real light looks: a near-white center that fades into a saturated color.
Step 1: Draw the shape in white
On a new layer above your dark background, draw the object that should glow, such as a crescent moon, a firefly, a neon tube, or eyes in a jack-o'-lantern. Use white or a very light tint. A plain hard-edged brush is enough.
Step 2: Duplicate and recolor
Duplicate the layer. Fill the copy with the glow color you want, such as pale pink, teal, or orange (dragging a color onto the layer works). Pick something saturated and bright.
Step 3: Blur the colored copy
With the colored layer selected, go to Adjustments → Gaussian Blur and slide across the canvas. Keep the first pass modest. The color should spill just beyond the rim of the white shape, so the white core still reads as the hottest part.
Put the blurred color layer underneath the white layer. Now you have a white center with a colored halo.
Step 4: Change the blend mode
Open the layer's blend mode menu and try these modes on the blurred color layer:
- Add: brightens strongly and builds a luminous, intense glow. Duplicate the layer once or twice for a stronger result.
- Overlay: adds saturation and richness without blowing out highlights.
- Color Dodge: gives a hot, high-energy look and is useful for highlights on skin or hair when a glow is hitting a face.
- Screen: a softer alternative to Add that lowers the risk of clipping.
Step 5: Stack in layers of different radii
Realistic light falls off gradually, which a single blur rarely captures. Duplicate the blurred layer and apply a larger Gaussian Blur to the copy. Now you have a tight inner glow plus a wide outer halo. Two or three layers of increasing blur, set to Add, usually look better than one heavily blurred layer. Don't stack too many. Past a handful of layers, the image usually turns muddy or washed out, and you lose the structure of the original shape.
Method 3: Paint the Glow by Hand
The blur approach can look slick and uniform, especially in a textured, painterly piece. Painting the glow gives it a more organic quality.
- Create a new layer under your glowing subject.
- Choose a soft airbrush or a textured brush and pick a saturated color from your palette.
- Paint around the light source, building from the center outward. Use lower opacity and layer several passes.
- Set the layer to Add or Screen if it needs more luminosity, or leave it on Normal for a flatter, stylized look.
You can also combine methods: paint a rough glow, duplicate it, and blur the copy for a softer outer layer. That keeps hand-drawn texture near the source and smooth falloff farther away.
Make the Glow Interact With the Scene
A glow looks flat when it only exists around the object. Real light also affects everything nearby.
- Rim and spill light. Create a clipping mask over nearby objects (the figure's face, a wall, foliage) and paint colored light on the sides that face the source. Use a soft brush and Add or Color Dodge.
- Match the hue. The spilled light should share the glow's color. A pink lamp throws pink light on skin, not white.
- Shadows shift too. Add a darker, cooler tone on the sides facing away from the light to emphasize contrast.
- Add particles. Small dots, sparks, or floating specks on Add mode sell the atmosphere. Vary their size and sharpness.
- Add a final sharp highlight. A small, crisp white or light-colored accent in the brightest spots helps the glow read as hot.
Common Glow Mistakes
- Starting on a light background. The glow has nothing to contrast with and looks like a smudge.
- Over-blurring the first pass. If the colored layer is too soft, the shape disappears. Keep the first blur small.
- Too many Add layers. The image clips to white and loses its color.
- Only using white. A glow needs a hot core and a colored falloff. Pure white halos look like fog.
- Ignoring the environment. Without spill light on nearby surfaces, the glow looks pasted on.
Taking Procreate Glow Into a Motion Pipeline
If you're a motion designer or VFX artist, Procreate is often a place to build concept art, style frames, or textures, and the glow work then moves into a compositing tool. A few practical points make that handoff smoother.
Keep layers separate. Export your layers from Procreate and keep the white core, colored glow, and spill layers on their own layers. In After Effects, you can set the blend modes to Add or Screen and animate each layer's opacity, scale, or blur independently, for example to make a light flicker or pulse.
Decide where glow is baked. Glow painted into a flat image is fixed. If the light will animate or interact with moving elements, it is usually better to create the glow in the compositor with a blurred duplicate or a glow effect, and keep the Procreate piece as the source artwork or look reference.
Use glow frames as direction. A Procreate piece with a defined lighting mood is a useful reference for the final look, whether you rebuild it in After Effects, Cinema 4D, Blender, or Nuke.
This is also where can fit, as a way to extend a glowing Procreate illustration into motion while you keep your compositing workflow. It doesn't replace the glow work above.
Quick Recipe Summary
- Darken the background so the glow has contrast.
- Draw the shape in white or a light tint.
- Duplicate it, recolor the copy, and apply a small Gaussian Blur.
- Place the blurred layer under the white layer and set it to Add or Overlay.
- Duplicate with a larger blur for a wider halo, but keep the total layer count low.
- Paint spill light on nearby surfaces with clipping masks.
- Optionally finish with Bloom, with Transition raised to protect the shadows.
Bloom is the shortcut and the layered method is the craft. Use Bloom for quick atmosphere and layered glows when the color, shape, and falloff matter. Either way, build on a dark base and keep the brightest part of the glow near white.