How to Make Text Outline Procreate
StyleFrame Team8 min read
Procreate has no one-tap outline tool for rasterized lettering, so you build the outline from a copy of the lettering. Duplicate the text layer, apply Gaussian Blur to the bottom copy, use Automatic Selection on the blurred layer to turn the soft halo into a hard-edged selection, then fill that selection on a new layer beneath the original. The width of the outline depends on how much blur you apply and how far you drag the selection threshold.
Before you start: rasterize and prepare the canvas
Procreate's Text tool creates a live text layer, and the Gaussian Blur and selection steps below won't work on it. Rasterize the layer first. Tap the layer, choose Rasterize, and the text becomes ordinary pixels. Do this after you've finalized the typeface, kerning, and size, because you can't edit it as type afterward. Keep a hidden duplicate of the live text layer in case you need to revise.
Two other things to check:
- Canvas size. Procreate is raster-only, and the outline is built from blur and threshold, so the edge quality depends on resolution. If the lettering is destined for video or large-format use, start with a large canvas. A small one gives soft, stair-stepped edges once you scale up.
- Background and colors. Pick a background color that contrasts with both the text and the outline so you can see the selection and fill clearly. You can hide or remove the background at export.
How to make a text outline in Procreate, step by step
1. Duplicate the text layer
Swipe left on the rasterized text layer and tap Duplicate. You now have two identical layers. The top one stays untouched as your final lettering. The bottom one becomes the source of the outline. Some tutorials duplicate twice, blur the middle layer, and then combine the bottom two layers into one before making the selection. If your lettering is thin, try that.
2. Fill the bottom layer with the outline color (optional but useful)
Select the bottom layer, turn on Alpha Lock, and fill it with the color you want for the outline. A darker color than the text usually reads best. Turn Alpha Lock back off afterward. This step is optional because you can fill the selection later, but it makes the blurred halo easier to see.
3. Apply Gaussian Blur to the bottom layer
With the bottom layer active, open Adjustments (the magic wand icon), choose Gaussian Blur, and select Layer mode. Slide the Apple Pencil across the canvas to the right to increase the blur. Most tutorials land between roughly 7% and 10%, but the right value depends on your canvas size and letter weight. The goal is a soft halo that extends past the letter edges. Too much blur causes problems in the next step, because the halo can merge adjacent letters or lose its defined shape.
4. Turn the halo into a selection
Tap the Selection tool (the S icon) and set the mode to Automatic. Tap on the blurred lettering, then drag the pencil to the right. This raises the selection threshold, so the selection expands outward through the blur. Stop as soon as you see the selection edge hug the lettering at the thickness you want. The selection preview shows a colored overlay, so you can judge the outline width before committing.
If the entire canvas turns blue, you've dragged too far. Pull back, or reduce the blur.
5. Create the outline layer and fill it
Hide the blurred layer by unticking its checkbox. Add a new layer, then drag it below the original top text layer so the outline sits behind the lettering. Pick your outline color and tap Fill Layer from the layer thumbnail menu. Because you're filling a selection rather than painting, the edges stay clean. Some tutorials fill by painting over the selection with a hard airbrush, which works but requires going over the area several times.
Deselect when you're done by tapping the Selection tool again.
6. Clean up
Zoom in and check the inner counters (the holes in letters like "a," "e," and "o") and tight joins between letters. Where the outline merges between close letters, you can erase manually on the outline layer, or increase letter spacing before starting. If the outline edge looks slightly soft, re-run the selection with a lower blur amount and a slightly higher threshold, which tends to give a crisper contour.
Troubleshooting common problems
The selection grabs the whole background. The threshold is too high, or the layer you tapped is mostly transparent haze. Reduce the blur, then drag the threshold less.
The selection picks up only a speck of one letter. Make sure the blurred layer is the active layer when you tap with Automatic Selection, and that the lettering is on its own layer with no merged background. Lower the threshold drag distance until the selection spreads to cover the whole word.
The outline is wobbly. The edge of the outline mirrors the edge of the source lettering. If you hand-lettered with a textured brush, the outline will reflect that. Use a brush with clean edges, or apply the technique to a smooth typeface.
The outline fills the inside of the letters. This is a layer-order issue. The outline layer should sit beneath the text layer, and the text layer needs to remain fully opaque.
Outline thickness is inconsistent across the canvas. Gaussian Blur and threshold operate on the whole layer, so if you have lettering at several sizes, outline each size group separately or scale the text to a consistent size first.
Adding a shadow or offset
Once you have an outline layer, you can duplicate it and use it as a drop shadow. Duplicate the outline layer, move the lower copy down and slightly in with the Transform tool, and recolor it. A few stray disconnected edges between the shadow and the outline can be joined by hand with a brush.
Taking Procreate lettering into a motion pipeline
If you're a motion designer, the outline in Procreate is usually a means to an end. You'll want to bring the finished lettering into After Effects, Premiere Pro, or a 3D tool. A few practical notes:
- Export with transparency. Hide the background layer and export as PNG, or export as PSD to keep the text and outline layers separate. Separate layers let you animate or color the outline independently in After Effects.
- Remember it's raster. Unlike an Illustrator path or an After Effects shape layer, a Procreate outline won't scale cleanly. If you need infinite scalability, or want animated stroke width, use a vector workflow instead: convert text to shapes in After Effects, or apply a Stroke layer style to a text layer.
- Choose by need. Procreate's blur-and-select method suits hand-lettered, textured, or illustrative looks where you want a pixel-based, slightly organic edge. For clean typographic strokes, native tools in After Effects, Illustrator, or Affinity are faster and fully editable.
- Animate in frames if you must. Procreate's Animation Assist lets you build frame-by-frame lettering, and each frame can be outlined with the same technique. This gets repetitive quickly, so keep the blur and threshold consistent to avoid outline flicker between frames.
Where Styleframe fits when the lettering becomes footage
Once Procreate lettering is part of a larger shot, the work shifts from drawing to controlling a look across many frames. Styleframe is an AI video and motion tool built for that kind of directed control rather than one-click output. Every generation is driven by your own reference images, video clips, and keyframes, and iteration is non-destructive, so you can revise without losing earlier passes.
A few practical ways it can sit next to a Procreate lettering workflow:
- Frames-to-Video. Use outlined lettering frames from Procreate as keyframes and let Frames-to-Video generate the motion between them, with your artwork defining start and end states.
- Restyle and Ink-and-Paint. These are reference-driven style transfer tools. You can feed in a reference of your hand-inked outline look and apply it to video or 3D renders, so footage picks up the lettering's line quality.
- Remove Background and 4K Upscale. Remove Background isolates elements from footage. 4K Upscale helps when raster artwork needs to meet a 4K delivery spec, though it's best to start at a high resolution in Procreate.
- 2D-to-3D and Turntable. These can turn flat artwork into a dimensional asset you can review from multiple angles.
Styleframe exports image sequences, so the results drop into your existing compositing setup in After Effects or Nuke. You keep your pipeline and use Styleframe for the generative and stylization steps within it.
Quick reference
- Rasterize the text layer.
- Duplicate it, and keep the top copy untouched.
- Gaussian Blur (Layer mode) on the bottom copy, around 7–10% depending on canvas size.
- Selection tool in Automatic mode: tap the blurred text and drag right until the edge sits where you want the outline.
- Hide the blurred layer, add a new layer beneath the text, and fill the selection with your outline color.
- Deselect, zoom in, and clean up joins and counters.
- Export as transparent PNG or layered PSD for use in After Effects or your editor.
Final thoughts
Procreate's outline workflow is a clever workaround rather than a built-in feature, and it works best when you control the inputs: clean source lettering, a high-resolution canvas, and a moderate blur. Once you've done it a few times, you'll know what blur and threshold values suit your typical canvas size. When the lettering needs to scale, animate its stroke, or stay editable, move that part of the job into a vector or native After Effects workflow, and use Procreate for what it does best: expressive, hand-made looks.